[Wed Jun  5 21:22:37 2013] Detection parameters:
  Position = (283.1, 273.8) = 13 10 1.07 32 22 29.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 33.7 +/- 9.4
  Background counts = 16.5
  Rate = 0.0007 +/- 0.0002

[Wed Jun  5 21:22:37 2013] Off-axis axis estimate = 2.10'
[Thu Jun  6 01:37:58 2013] Using EEF radius (= 7.48 ")to estimate initial spatial extent for simple fitting
[Thu Jun  6 01:37:58 2013] Initial guess for spatial extent in simple fitting = 7.48"
[Thu Jun  6 01:37:58 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.812
[Thu Jun  6 01:37:58 2013] Giving source the simple spatial ID 43 for pass 0, mean size = 7.48"
[Thu Jun  6 03:01:33 2013] fullrun_mos2_xmm0020540401_pi300-10000_cl_pass0_src43.ximg exists
[Thu Jun  6 03:01:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0020540401_pi300-10000_cl_pass0_src43.csv
[Thu Jun  6 03:01:33 2013] fullrun_mos2_xmm0020540401_pi300-10000_cl_pass0_src43_1.ximg exists
[Thu Jun  6 03:01:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0020540401_pi300-10000_cl_pass0_src43.csv
[Thu Jun  6 03:01:33 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0020540401_pi300-10000_cl_pass0_src43_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0020540401_pi300-10000_cl_pass0_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  6 03:01:33 2013] fullrun_mos2_xmm0020540401_pi300-10000_cl_pass0_tfrozen_src43.ximg exists
[Thu Jun  6 03:01:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0020540401_pi300-10000_cl_pass0_tfrozen_src43.csv
[Thu Jun  6 03:01:33 2013] fullrun_mos2_xmm0020540401_pi300-10000_cl_pass0_tfrozen_src43_1.ximg exists
[Thu Jun  6 03:01:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0020540401_pi300-10000_cl_pass0_tfrozen_src43.csv
[Thu Jun  6 03:01:33 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0020540401_pi300-10000_cl_pass0_tfrozen_src43_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0020540401_pi300-10000_cl_pass0_tfrozen_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  6 03:02:07 2013] Warning, spatial fit 43 centroid is now closest to src. 34
[Thu Jun  6 03:02:07 2013] Vigneting correction estimate = 1.000000
[Thu Jun  6 03:02:07 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun  6 03:02:07 2013] Assessing source extent using major
[Thu Jun  6 03:02:07 2013] Source does appear to be extended
[Thu Jun  6 03:02:07 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun  6 08:49:54 2013] Using EEF radius (= 7.48 ")to estimate initial spatial extent for simple fitting
[Thu Jun  6 08:49:54 2013] Initial guess for spatial extent in simple fitting = 7.48"
[Thu Jun  6 08:49:54 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.812
[Thu Jun  6 08:49:54 2013] Giving source the simple spatial ID 41 for pass 1, mean size = 7.48"
[Thu Jun  6 09:51:45 2013] fullrun_mos2_xmm0020540401_pi300-10000_cl_pass1_src41.ximg exists
[Thu Jun  6 09:51:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0020540401_pi300-10000_cl_pass1_src41.csv
[Thu Jun  6 09:51:45 2013] fullrun_mos2_xmm0020540401_pi300-10000_cl_pass1_src41_1.ximg exists
[Thu Jun  6 09:51:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0020540401_pi300-10000_cl_pass1_src41.csv
[Thu Jun  6 09:51:45 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0020540401_pi300-10000_cl_pass1_src41_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0020540401_pi300-10000_cl_pass1_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  6 09:51:45 2013] fullrun_mos2_xmm0020540401_pi300-10000_cl_pass1_tfrozen_src41.ximg exists
[Thu Jun  6 09:51:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0020540401_pi300-10000_cl_pass1_tfrozen_src41.csv
[Thu Jun  6 09:51:45 2013] fullrun_mos2_xmm0020540401_pi300-10000_cl_pass1_tfrozen_src41_1.ximg exists
[Thu Jun  6 09:51:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0020540401_pi300-10000_cl_pass1_tfrozen_src41.csv
[Thu Jun  6 09:51:45 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0020540401_pi300-10000_cl_pass1_tfrozen_src41_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0020540401_pi300-10000_cl_pass1_tfrozen_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  6 09:52:16 2013] Spatial fit model total counts = 269.131000, observed total counts = 243.000000
[Thu Jun  6 09:52:16 2013] Poor agreement between spatial fit and data for source 31
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jun  6 09:52:16 2013] Vigneting correction estimate = 1.000000
[Thu Jun  6 09:52:16 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun  6 09:52:16 2013] Assessing source extent using major
[Thu Jun  6 09:52:16 2013] Source does appear to be extended
[Thu Jun  6 09:52:16 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun  6 13:14:51 2013] XMMSAS src. selection expression = ellipse(24585.424683, 23775.115051, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun  6 13:14:51 2013] Writing source region out to fullrun_mos2_xmm0020540401_pi300-10000_pass1_cl_src31_src.reg
[Thu Jun  6 13:14:51 2013] Extracting stamp from image fullrun_mos2_xmm0020540401_pi300-10000_cl_sm2.00.img.gz, (246, 236) - (321, 311)
[Thu Jun  6 13:14:51 2013] XMMSAS bgd. selection expression = annulus(24585.424683, 23775.115051, 1087.500000, 2175.000000, X, Y) && !ellipse(23399.900200, 21527.717200, 394.468011, 394.468011, 0.000000, X, Y) && !ellipse(25322.699768, 23252.791138, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26391.728729, 23403.639282, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26350.230621, 23879.370087, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun  6 13:14:51 2013] Writing fullrun_mos2_xmm0020540401_pi300-10000_pass1_cl_src31.gif
[Thu Jun  6 13:28:15 2013] Mean detx,y = (-1161.12, -588.94) 
[Thu Jun  6 13:28:16 2013] Setting backscal keywords in source and bgd. spectrum
[Thu Jun  6 13:28:24 2013] Binned source spectrum to 10 counts/bin
[Thu Jun  6 13:28:24 2013] Setting source spectrum file to fullrun_mos2_xmm0020540401_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Thu Jun  6 13:28:24 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0020540401_pi300-10000_pass1_cl_src31_bgd.pi.gz
[Thu Jun  6 13:55:05 2013] Not generating rmf since there are only 33 counts
[Thu Jun  6 13:55:05 2013] rmf not generated due to insufficient counts
[Thu Jun  6 13:57:02 2013] Updating aperture counts using extracted products
[Thu Jun  6 13:57:02 2013] Total counts from fullrun_mos2_xmm0020540401_pi300-10000_pass1_cl_src31_src_b10.pi.gz = 180.00
[Thu Jun  6 13:57:02 2013] Total counts from fullrun_mos2_xmm0020540401_pi300-10000_pass1_cl_src31_bgd.pi.gz = 776.00
[Thu Jun  6 13:57:02 2013] Got source and background scale factors 1258520.000000, 8328660.000000
[Thu Jun  6 13:57:02 2013] User source parameters:
  Position = (283.1, 273.8) = 13 10 1.07 32 22 29.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 62.7 +/- 14.4
  Background aperture counts = 117.3
  Rate = 0.001 +/- 0.0003

[Thu Jun  6 13:57:02 2013] Updating counts from extracted products
[Thu Jun  6 13:57:02 2013] Set source signif. to 62.74/10.83 = 5.79
[Thu Jun  6 13:57:03 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun  6 13:57:03 2013] Using photon index=1.80, rate=0.00128, arf fullrun_mos2_xmm0020540401_pi300-10000_pass1_cl_src31.arf
[Thu Jun  6 13:57:03 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun  6 13:57:03 2013] Updating source flux to 1.2e-14
[Thu Jun  6 13:57:13 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Jun  6 13:57:17 2013] xmm0020540401/analysis//spectral/fullrun_mos2_xmm0020540401_pi300-10000_pass1_cl_src31_pl.csv not found, spectral fit skipped or did not complete