[Wed Jun  5 21:22:37 2013] Detection parameters:
  Position = (182.0, 283.0) = 13 10 35.80 32 23 9.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 47.8 +/- 9.3
  Background counts = 14.4
  Rate = 0.002 +/- 0.0004

[Wed Jun  5 21:22:37 2013] Off-axis axis estimate = 8.51'
[Thu Jun  6 01:37:58 2013] Using EEF radius (= 10.69 ")to estimate initial spatial extent for simple fitting
[Thu Jun  6 01:37:58 2013] Initial guess for spatial extent in simple fitting = 10.69"
[Thu Jun  6 01:37:58 2013] source mask rpix=2.5, npix_max = 34, mask sum = 27, frac = 0.772
[Thu Jun  6 01:37:58 2013] Giving source the simple spatial ID 26 for pass 0, mean size = 10.69"
[Thu Jun  6 03:01:33 2013] fullrun_mos2_xmm0020540401_pi300-10000_cl_pass0_src26.ximg exists
[Thu Jun  6 03:01:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0020540401_pi300-10000_cl_pass0_src26.csv
[Thu Jun  6 03:01:33 2013] fullrun_mos2_xmm0020540401_pi300-10000_cl_pass0_src26_1.ximg exists
[Thu Jun  6 03:01:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0020540401_pi300-10000_cl_pass0_src26.csv
[Thu Jun  6 03:01:33 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0020540401_pi300-10000_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0020540401_pi300-10000_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  6 03:01:33 2013] fullrun_mos2_xmm0020540401_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Thu Jun  6 03:01:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0020540401_pi300-10000_cl_pass0_tfrozen_src26.csv
[Thu Jun  6 03:01:33 2013] fullrun_mos2_xmm0020540401_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Thu Jun  6 03:01:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0020540401_pi300-10000_cl_pass0_tfrozen_src26.csv
[Thu Jun  6 03:01:33 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0020540401_pi300-10000_cl_pass0_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0020540401_pi300-10000_cl_pass0_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  6 03:02:06 2013] Warning: source 26 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 28 at 14.631486 pixels away
[Thu Jun  6 03:02:07 2013] Vigneting correction estimate = 1.000000
[Thu Jun  6 03:02:07 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun  6 03:02:07 2013] Assessing source extent using major
[Thu Jun  6 03:02:07 2013] Source does appear to be extended
[Thu Jun  6 03:02:07 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun  6 08:49:54 2013] Using EEF radius (= 10.69 ")to estimate initial spatial extent for simple fitting
[Thu Jun  6 08:49:54 2013] Initial guess for spatial extent in simple fitting = 10.69"
[Thu Jun  6 08:49:54 2013] source mask rpix=2.5, npix_max = 34, mask sum = 27, frac = 0.772
[Thu Jun  6 08:49:54 2013] Giving source the simple spatial ID 26 for pass 1, mean size = 10.69"
[Thu Jun  6 09:51:45 2013] fullrun_mos2_xmm0020540401_pi300-10000_cl_pass1_src26.ximg exists
[Thu Jun  6 09:51:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0020540401_pi300-10000_cl_pass1_src26.csv
[Thu Jun  6 09:51:45 2013] fullrun_mos2_xmm0020540401_pi300-10000_cl_pass1_src26_1.ximg exists
[Thu Jun  6 09:51:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0020540401_pi300-10000_cl_pass1_src26.csv
[Thu Jun  6 09:51:45 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0020540401_pi300-10000_cl_pass1_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0020540401_pi300-10000_cl_pass1_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  6 09:51:45 2013] fullrun_mos2_xmm0020540401_pi300-10000_cl_pass1_tfrozen_src26.ximg exists
[Thu Jun  6 09:51:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0020540401_pi300-10000_cl_pass1_tfrozen_src26.csv
[Thu Jun  6 09:51:45 2013] fullrun_mos2_xmm0020540401_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists
[Thu Jun  6 09:51:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0020540401_pi300-10000_cl_pass1_tfrozen_src26.csv
[Thu Jun  6 09:51:45 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0020540401_pi300-10000_cl_pass1_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0020540401_pi300-10000_cl_pass1_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  6 09:52:16 2013] Spatial fit model total counts = 242.174000, observed total counts = 176.000000
[Thu Jun  6 09:52:16 2013] Poor agreement between spatial fit and data for source 28
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jun  6 09:52:16 2013] Vigneting correction estimate = 1.000000
[Thu Jun  6 09:52:16 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun  6 09:52:16 2013] Assessing source extent using major
[Thu Jun  6 09:52:16 2013] Source does appear to be extended
[Thu Jun  6 09:52:16 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun  6 13:14:50 2013] XMMSAS src. selection expression = ellipse(15786.522186, 24570.296326, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun  6 13:14:50 2013] Writing source region out to fullrun_mos2_xmm0020540401_pi300-10000_pass1_cl_src28_src.reg
[Thu Jun  6 13:14:50 2013] Extracting stamp from image fullrun_mos2_xmm0020540401_pi300-10000_cl_sm2.00.img.gz, (145, 245) - (220, 320)
[Thu Jun  6 13:14:50 2013] XMMSAS bgd. selection expression = annulus(15786.522186, 24570.296326, 1087.500000, 2175.000000, X, Y) && !ellipse(17602.700800, 21753.545600, 1627.144847, 1395.664840, 79.282491, X, Y) && !ellipse(18579.182892, 26327.192932, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14583.155380, 21791.136444, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun  6 13:14:50 2013] Writing fullrun_mos2_xmm0020540401_pi300-10000_pass1_cl_src28.gif
[Thu Jun  6 13:24:21 2013] Mean detx,y = (-7817.69, -6382.12) 
[Thu Jun  6 13:24:22 2013] Setting backscal keywords in source and bgd. spectrum
[Thu Jun  6 13:24:45 2013] Binned source spectrum to 10 counts/bin
[Thu Jun  6 13:24:45 2013] Setting source spectrum file to fullrun_mos2_xmm0020540401_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Thu Jun  6 13:24:45 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0020540401_pi300-10000_pass1_cl_src28_bgd.pi.gz
[Thu Jun  6 13:53:29 2013] Not generating rmf since there are only 47 counts
[Thu Jun  6 13:53:29 2013] rmf not generated due to insufficient counts
[Thu Jun  6 13:57:00 2013] Updating aperture counts using extracted products
[Thu Jun  6 13:57:00 2013] Total counts from fullrun_mos2_xmm0020540401_pi300-10000_pass1_cl_src28_src_b10.pi.gz = 131.00
[Thu Jun  6 13:57:00 2013] Total counts from fullrun_mos2_xmm0020540401_pi300-10000_pass1_cl_src28_bgd.pi.gz = 838.00
[Thu Jun  6 13:57:00 2013] Got source and background scale factors 1067736.000000, 10126376.000000
[Thu Jun  6 13:57:00 2013] User source parameters:
  Position = (182.0, 283.0) = 13 10 35.80 32 23 9.3
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 42.6 +/- 12.5
  Background aperture counts = 88.4
  Rate = 0.0009 +/- 0.0003

[Thu Jun  6 13:57:00 2013] Updating counts from extracted products
[Thu Jun  6 13:57:00 2013] Set source signif. to 42.64/9.40 = 4.54
[Thu Jun  6 13:57:03 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun  6 13:57:03 2013] Using photon index=1.80, rate=0.000868, arf fullrun_mos2_xmm0020540401_pi300-10000_pass1_cl_src28.arf
[Thu Jun  6 13:57:03 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun  6 13:57:03 2013] Updating source flux to 2e-14
[Thu Jun  6 13:57:13 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Jun  6 13:57:17 2013] xmm0020540401/analysis//spectral/fullrun_mos2_xmm0020540401_pi300-10000_pass1_cl_src28_pl.csv not found, spectral fit skipped or did not complete