[Wed Jun  5 21:22:09 2013] Detection parameters:
  Position = (288.6, 226.8) = 13 9 59.18 32 19 7.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 133.5 +/- 16.1
  Background counts = 13.3
  Rate = 0.003 +/- 0.0004

[Wed Jun  5 21:22:09 2013] Off-axis axis estimate = 5.25'
[Thu Jun  6 00:20:19 2013] Using EEF radius (= 9.05 ")to estimate initial spatial extent for simple fitting
[Thu Jun  6 00:20:19 2013] Initial guess for spatial extent in simple fitting = 9.05"
[Thu Jun  6 00:20:19 2013] source mask rpix=2.1, npix_max = 26, mask sum = 20, frac = 0.751
[Thu Jun  6 00:20:19 2013] Giving source the simple spatial ID 14 for pass 0, mean size = 9.05"
[Thu Jun  6 01:37:57 2013] fullrun_mos1_xmm0020540401_pi300-10000_cl_pass0_src14.ximg exists
[Thu Jun  6 01:37:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0020540401_pi300-10000_cl_pass0_src14.csv
[Thu Jun  6 01:37:57 2013] fullrun_mos1_xmm0020540401_pi300-10000_cl_pass0_src14_1.ximg exists
[Thu Jun  6 01:37:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0020540401_pi300-10000_cl_pass0_src14.csv
[Thu Jun  6 01:37:57 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0020540401_pi300-10000_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0020540401_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  6 01:37:57 2013] fullrun_mos1_xmm0020540401_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Thu Jun  6 01:37:57 2013] fullrun_mos1_xmm0020540401_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Thu Jun  6 01:37:57 2013] Fit fullrun_mos1_xmm0020540401_pi300-10000_cl_pass0_tfrozen_src14 appears to have run properly
[Thu Jun  6 03:01:58 2013] Spatial fit model total counts = 221.030000, observed total counts = 239.000000
[Thu Jun  6 03:01:58 2013] Offset between fit and detection position for source 41 = 0.993658 pixels
[Thu Jun  6 03:01:58 2013] 223.125200 total counts/ 190.194000 bgd. counts: snr = 2.387862
Spatial fit parameters:
  Offset between fit and detection position for source 41 = 0.993658 pixels
  Position = (289.2, 227.6) = 13 9 58.98 32 19 4.3
  Extent = 4.1 (2.5-6.5)", rotation angle = 0
  Source counts = 32.9 +/- 14.9
  Background counts = 190.2
  Rate = 0.0007 +/- 0.0003
[Thu Jun  6 03:01:58 2013] Vigneting correction estimate = 1.000000
[Thu Jun  6 03:01:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun  6 03:01:58 2013] Assessing source extent using major axis lower bound
[Thu Jun  6 03:01:58 2013] Source does appear to be extended
[Thu Jun  6 03:01:58 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun  6 07:42:57 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jun  6 07:42:57 2013] Initial guess for spatial extent in simple fitting = 4.09"
[Thu Jun  6 07:42:57 2013] source mask rpix=0.9, npix_max = 8, mask sum = 7, frac = 0.845
[Thu Jun  6 07:42:57 2013] Giving source the simple spatial ID 14 for pass 1, mean size = 4.09"
[Thu Jun  6 08:49:53 2013] fullrun_mos1_xmm0020540401_pi300-10000_cl_pass1_src14.ximg exists
[Thu Jun  6 08:49:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0020540401_pi300-10000_cl_pass1_src14.csv
[Thu Jun  6 08:49:53 2013] fullrun_mos1_xmm0020540401_pi300-10000_cl_pass1_src14_1.ximg exists
[Thu Jun  6 08:49:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0020540401_pi300-10000_cl_pass1_src14.csv
[Thu Jun  6 08:49:53 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0020540401_pi300-10000_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0020540401_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  6 08:49:54 2013] fullrun_mos1_xmm0020540401_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Thu Jun  6 08:49:54 2013] fullrun_mos1_xmm0020540401_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Thu Jun  6 08:49:54 2013] Fit fullrun_mos1_xmm0020540401_pi300-10000_cl_pass1_tfrozen_src14 appears to have run properly
[Thu Jun  6 09:52:09 2013] Spatial fit model total counts = 216.212000, observed total counts = 239.000000
[Thu Jun  6 09:52:09 2013] Offset between fit and detection position for source 41 = 0.003397 pixels
[Thu Jun  6 09:52:09 2013] 219.525500 total counts/ 184.419000 bgd. counts: snr = 2.585144
Spatial fit parameters:
  Offset between fit and detection position for source 41 = 0.003397 pixels
  Position = (289.2, 227.6) = 13 9 58.98 32 19 4.3
  Extent = 4.4 (2.5-7.3)", rotation angle = 0
  Source counts = 35.1 +/- 14.8
  Background counts = 184.4
  Rate = 0.0007 +/- 0.0003
[Thu Jun  6 09:52:09 2013] Vigneting correction estimate = 1.000000
[Thu Jun  6 09:52:09 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun  6 09:52:09 2013] Assessing source extent using major axis lower bound
[Thu Jun  6 09:52:09 2013] Source does appear to be extended
[Thu Jun  6 09:52:09 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun  6 12:08:22 2013] XMMSAS src. selection expression = ellipse(25113.466860, 19748.874200, 266.895008, 266.895008, 0.000000, X, Y)
[Thu Jun  6 12:08:22 2013] Writing source region out to fullrun_mos1_xmm0020540401_pi300-10000_pass1_cl_src41_src.reg
[Thu Jun  6 12:08:22 2013] Extracting stamp from image fullrun_mos1_xmm0020540401_pi300-10000_cl_sm2.00.img.gz, (274, 212) - (305, 243)
[Thu Jun  6 12:08:22 2013] XMMSAS bgd. selection expression = annulus(25113.466860, 19748.874200, 444.825013, 889.650026, X, Y) && !ellipse(24452.389130, 18870.799362, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun  6 12:08:22 2013] Writing fullrun_mos1_xmm0020540401_pi300-10000_pass1_cl_src41.gif
[Thu Jun  6 12:18:12 2013] Mean detx,y = (3110.40, 2896.12) 
[Thu Jun  6 12:18:13 2013] Setting backscal keywords in source and bgd. spectrum
[Thu Jun  6 12:18:20 2013] Binned source spectrum to 10 counts/bin
[Thu Jun  6 12:18:20 2013] Setting source spectrum file to fullrun_mos1_xmm0020540401_pi300-10000_pass1_cl_src41_src_b10.pi.gz
[Thu Jun  6 12:18:20 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0020540401_pi300-10000_pass1_cl_src41_bgd.pi.gz
[Thu Jun  6 13:00:03 2013] Not generating rmf since there are only 35 counts
[Thu Jun  6 13:00:03 2013] rmf not generated due to insufficient counts
[Thu Jun  6 13:56:49 2013] Updating aperture counts using extracted products
[Thu Jun  6 13:56:49 2013] Total counts from fullrun_mos1_xmm0020540401_pi300-10000_pass1_cl_src41_src_b10.pi.gz = 85.00
[Thu Jun  6 13:56:49 2013] Total counts from fullrun_mos1_xmm0020540401_pi300-10000_pass1_cl_src41_bgd.pi.gz = 122.00
[Thu Jun  6 13:56:49 2013] Got source and background scale factors 198200.000000, 1260240.000000
[Thu Jun  6 13:56:49 2013] User source parameters:
  Position = (289.2, 227.6) = 13 9 58.98 32 19 4.3
  Extent = 4.4 (2.5-7.3)", rotation angle = 0
  Source aperture counts = 65.8 +/- 10.3
  Background aperture counts = 19.2
  Rate = 0.001 +/- 0.0002

[Thu Jun  6 13:56:56 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun  6 13:56:56 2013] Using photon index=1.80, rate=0.000714, arf fullrun_mos1_xmm0020540401_pi300-10000_pass1_cl_src41.arf
[Thu Jun  6 13:56:56 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun  6 13:56:56 2013] Updating source flux to 1.1e-14
[Thu Jun  6 13:57:05 2013] Source 41 has fewer than 100.000000 counts, skipping spectral fitting
[Thu Jun  6 13:57:13 2013] xmm0020540401/analysis//spectral/fullrun_mos1_xmm0020540401_pi300-10000_pass1_cl_src41_pl.csv not found, spectral fit skipped or did not complete