[Fri May 3 16:32:24 2013] Detection parameters: Position = (273.1, 274.2) = 22 34 34.47 -37 44 52.0 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 154.4 +/- 17.2 Background counts = 50.4 Rate = 0.05 +/- 0.005 [Fri May 3 16:32:24 2013] Off-axis axis estimate = 2.54' [Fri May 3 16:33:42 2013] Using EEF radius (= 7.70 ")to estimate initial spatial extent for simple fitting [Fri May 3 16:33:42 2013] Initial guess for spatial extent in simple fitting = 7.70" [Fri May 3 16:33:42 2013] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.776 [Fri May 3 16:33:42 2013] Giving source the simple spatial ID 30 for pass 0, mean size = 7.70" [Fri May 3 17:54:31 2013] fullrun_pn_xmm0018741701_pi300-10000_cl_pass0_src30.ximg exists [Fri May 3 17:54:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018741701_pi300-10000_cl_pass0_src30.csv [Fri May 3 17:54:31 2013] fullrun_pn_xmm0018741701_pi300-10000_cl_pass0_src30_1.ximg exists [Fri May 3 17:54:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018741701_pi300-10000_cl_pass0_src30.csv [Fri May 3 17:54:31 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0018741701_pi300-10000_cl_pass0_src30_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0018741701_pi300-10000_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri May 3 17:54:32 2013] fullrun_pn_xmm0018741701_pi300-10000_cl_pass0_tfrozen_src30.ximg exists [Fri May 3 17:54:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018741701_pi300-10000_cl_pass0_tfrozen_src30.csv [Fri May 3 17:54:32 2013] fullrun_pn_xmm0018741701_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists [Fri May 3 17:54:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018741701_pi300-10000_cl_pass0_tfrozen_src30.csv [Fri May 3 17:54:32 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0018741701_pi300-10000_cl_pass0_tfrozen_src30_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0018741701_pi300-10000_cl_pass0_tfrozen_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri May 3 21:45:34 2013] Spatial fit model total counts = 1392.090000, observed total counts = 1068.000000 [Fri May 3 21:45:34 2013] Poor agreement between spatial fit and data for source 30 It may help to tweak spatial fit manually Not incorporating fit results [Fri May 3 21:45:34 2013] Vigneting correction estimate = 1.000000 [Fri May 3 21:45:34 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri May 3 21:45:34 2013] Assessing source extent using major [Fri May 3 21:45:34 2013] Source does appear to be extended [Fri May 3 21:45:34 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Fri May 3 21:45:34 2013] Source is confused with source 27 [Fri May 3 21:45:51 2013] Using EEF radius (= 7.70 ")to estimate initial spatial extent for simple fitting [Fri May 3 21:45:51 2013] Initial guess for spatial extent in simple fitting = 7.70" [Fri May 3 21:45:51 2013] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.776 [Fri May 3 21:45:51 2013] Giving source the simple spatial ID 22 for pass 1, mean size = 7.70" [Fri May 3 22:59:26 2013] fullrun_pn_xmm0018741701_pi300-10000_cl_pass1_src22.ximg exists [Fri May 3 22:59:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018741701_pi300-10000_cl_pass1_src22.csv [Fri May 3 22:59:26 2013] fullrun_pn_xmm0018741701_pi300-10000_cl_pass1_src22_1.ximg exists [Fri May 3 22:59:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018741701_pi300-10000_cl_pass1_src22.csv [Fri May 3 22:59:26 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0018741701_pi300-10000_cl_pass1_src22_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0018741701_pi300-10000_cl_pass1_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri May 3 22:59:27 2013] fullrun_pn_xmm0018741701_pi300-10000_cl_pass1_tfrozen_src22.ximg exists [Fri May 3 22:59:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018741701_pi300-10000_cl_pass1_tfrozen_src22.csv [Fri May 3 22:59:27 2013] fullrun_pn_xmm0018741701_pi300-10000_cl_pass1_tfrozen_src22_1.ximg exists [Fri May 3 22:59:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018741701_pi300-10000_cl_pass1_tfrozen_src22.csv [Fri May 3 22:59:27 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0018741701_pi300-10000_cl_pass1_tfrozen_src22_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0018741701_pi300-10000_cl_pass1_tfrozen_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat May 4 01:56:58 2013] Source 30 is offset by 2.077117 and 6.196132 pixels which is larger than 2 X fitted extent = 4.400828 x 4.400828, not incorporating fit results [Sat May 4 01:56:58 2013] Vigneting correction estimate = 1.000000 [Sat May 4 01:56:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat May 4 01:56:58 2013] Assessing source extent using major [Sat May 4 01:56:58 2013] Source does appear to be extended [Sat May 4 01:56:58 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sat May 4 01:57:17 2013] XMMSAS src. selection expression = ellipse(23709.474762, 23804.219482, 652.500000, 652.500000, 0.000000, X, Y) [Sat May 4 01:57:17 2013] Writing source region out to fullrun_pn_xmm0018741701_pi300-10000_pass1_cl_src30_src.reg [Sat May 4 01:57:17 2013] Extracting stamp from image fullrun_pn_xmm0018741701_pi300-10000_cl_sm2.00.img.gz, (236, 237) - (311, 312) [Sat May 4 01:57:18 2013] XMMSAS bgd. selection expression = annulus(23709.474762, 23804.219482, 1087.500000, 2175.000000, X, Y) && !ellipse(25527.630000, 25045.990200, 1089.432031, 1089.432031, 0.000000, X, Y) && !ellipse(25151.115800, 24961.869000, 1115.808032, 1115.808032, 0.000000, X, Y) && !ellipse(24751.218000, 24833.277200, 1151.144033, 731.849621, 333.244000, X, Y) && !ellipse(25656.894800, 24118.114000, 300.001609, 300.001609, 0.000000, X, Y) && !ellipse(22440.591800, 26089.885800, 456.823213, 430.425612, 217.470000, X, Y) && !ellipse(25365.461670, 26385.141602, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26139.936000, 25691.386000, 1068.224031, 1068.224031, 0.000000, X, Y) && !ellipse(23257.493195, 25341.863770, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23790.338000, 24939.548000, 1209.848035, 1209.848035, 0.000000, X, Y) && !ellipse(22198.956000, 24367.776000, 1335.912038, 1335.912038, 0.000000, X, Y) && !ellipse(22637.403137, 24226.209839, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26544.920000, 23872.354000, 1203.224035, 1203.224035, 0.000000, X, Y) && !ellipse(24249.781189, 23502.661255, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24468.460022, 23273.845520, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26214.160370, 23426.536255, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24859.144928, 22997.427765, 870.000000, 870.000000, 0.000000, X, Y) [Sat May 4 01:57:18 2013] Writing fullrun_pn_xmm0018741701_pi300-10000_pass1_cl_src30.gif [Sat May 4 02:06:17 2013] Mean detx,y = (-194.28, -1477.25) [Sat May 4 02:06:19 2013] Setting backscal keywords in source and bgd. spectrum [Sat May 4 02:06:38 2013] Binned source spectrum to 10 counts/bin [Sat May 4 02:06:38 2013] Setting source spectrum file to fullrun_pn_xmm0018741701_pi300-10000_pass1_cl_src30_src_b10.pi.gz [Sat May 4 02:06:38 2013] Setting bgd. spectrum file to fullrun_pn_xmm0018741701_pi300-10000_pass1_cl_src30_bgd.pi.gz [Sat May 4 03:33:38 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Sat May 4 03:33:38 2013] rmf not generated due to insufficient counts [Sat May 4 05:35:55 2013] Updating aperture counts using extracted products [Sat May 4 05:35:55 2013] Total counts from fullrun_pn_xmm0018741701_pi300-10000_pass1_cl_src30_src_b10.pi.gz = 740.00 [Sat May 4 05:35:55 2013] Total counts from fullrun_pn_xmm0018741701_pi300-10000_pass1_cl_src30_bgd.pi.gz = 689.00 [Sat May 4 05:35:55 2013] Got source and background scale factors 1077712.000000, 2547044.000000 [Sat May 4 05:35:55 2013] User source parameters: Position = (273.1, 274.2) = 22 34 34.47 -37 44 52.0 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 448.5 +/- 28.2 Background aperture counts = 291.5 Rate = 0.1 +/- 0.006 [Sat May 4 05:35:55 2013] Updating counts from extracted products [Sat May 4 05:35:55 2013] Set source signif. to 448.47/17.07 = 26.27 [Sat May 4 05:35:57 2013] Calculating source flux in energy range 0.30-8.00 [Sat May 4 05:35:57 2013] Using photon index=1.80, rate=0.0999, arf fullrun_pn_xmm0018741701_pi300-10000_pass1_cl_src30.arf [Sat May 4 05:35:57 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sat May 4 05:35:57 2013] Updating source flux to 2.8e-13 [Sat May 4 05:36:14 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Sat May 4 05:36:21 2013] xmm0018741701/analysis//spectral/fullrun_pn_xmm0018741701_pi300-10000_pass1_cl_src30_pl.csv not found, spectral fit skipped or did not complete