[Fri May  3 16:32:24 2013] Detection parameters:
  Position = (281.8, 268.1) = 22 34 31.27 -37 45 21.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 116.1 +/- 16.9
  Background counts = 49.5
  Rate = 0.03 +/- 0.005

[Fri May  3 16:32:24 2013] Off-axis axis estimate = 2.51'
[Fri May  3 16:33:42 2013] Using EEF radius (= 7.68 ")to estimate initial spatial extent for simple fitting
[Fri May  3 16:33:42 2013] Initial guess for spatial extent in simple fitting = 7.68"
[Fri May  3 16:33:42 2013] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.779
[Fri May  3 16:33:42 2013] Giving source the simple spatial ID 29 for pass 0, mean size = 7.68"
[Fri May  3 17:54:31 2013] fullrun_pn_xmm0018741701_pi300-10000_cl_pass0_src29.ximg exists
[Fri May  3 17:54:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018741701_pi300-10000_cl_pass0_src29.csv
[Fri May  3 17:54:31 2013] fullrun_pn_xmm0018741701_pi300-10000_cl_pass0_src29_1.ximg exists
[Fri May  3 17:54:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018741701_pi300-10000_cl_pass0_src29.csv
[Fri May  3 17:54:31 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0018741701_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0018741701_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 17:54:32 2013] fullrun_pn_xmm0018741701_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Fri May  3 17:54:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018741701_pi300-10000_cl_pass0_tfrozen_src29.csv
[Fri May  3 17:54:32 2013] fullrun_pn_xmm0018741701_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Fri May  3 17:54:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018741701_pi300-10000_cl_pass0_tfrozen_src29.csv
[Fri May  3 17:54:32 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0018741701_pi300-10000_cl_pass0_tfrozen_src29_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0018741701_pi300-10000_cl_pass0_tfrozen_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 21:45:34 2013] Warning, spatial fit 29 centroid is now closest to src. 4
[Fri May  3 21:45:34 2013] Vigneting correction estimate = 1.000000
[Fri May  3 21:45:34 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  3 21:45:34 2013] Assessing source extent using major
[Fri May  3 21:45:34 2013] Source does appear to be extended
[Fri May  3 21:45:34 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  3 21:45:34 2013] Source is confused with source 27
[Fri May  3 21:45:51 2013] Using EEF radius (= 7.68 ")to estimate initial spatial extent for simple fitting
[Fri May  3 21:45:51 2013] Initial guess for spatial extent in simple fitting = 7.68"
[Fri May  3 21:45:51 2013] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.779
[Fri May  3 21:45:51 2013] Giving source the simple spatial ID 21 for pass 1, mean size = 7.68"
[Fri May  3 22:59:26 2013] fullrun_pn_xmm0018741701_pi300-10000_cl_pass1_src21.ximg exists
[Fri May  3 22:59:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018741701_pi300-10000_cl_pass1_src21.csv
[Fri May  3 22:59:26 2013] fullrun_pn_xmm0018741701_pi300-10000_cl_pass1_src21_1.ximg exists
[Fri May  3 22:59:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018741701_pi300-10000_cl_pass1_src21.csv
[Fri May  3 22:59:26 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0018741701_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0018741701_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 22:59:27 2013] fullrun_pn_xmm0018741701_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Fri May  3 22:59:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018741701_pi300-10000_cl_pass1_tfrozen_src21.csv
[Fri May  3 22:59:27 2013] fullrun_pn_xmm0018741701_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Fri May  3 22:59:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018741701_pi300-10000_cl_pass1_tfrozen_src21.csv
[Fri May  3 22:59:27 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0018741701_pi300-10000_cl_pass1_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0018741701_pi300-10000_cl_pass1_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  4 01:56:58 2013] Warning: source 21 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 29 at 10.566718 pixels away
[Sat May  4 01:56:58 2013] Vigneting correction estimate = 1.000000
[Sat May  4 01:56:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May  4 01:56:58 2013] Assessing source extent using major
[Sat May  4 01:56:58 2013] Source does appear to be extended
[Sat May  4 01:56:58 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May  4 01:57:17 2013] XMMSAS src. selection expression = ellipse(24468.460022, 23273.845520, 652.500000, 652.500000, 0.000000, X, Y)
[Sat May  4 01:57:17 2013] Writing source region out to fullrun_pn_xmm0018741701_pi300-10000_pass1_cl_src29_src.reg
[Sat May  4 01:57:17 2013] Extracting stamp from image fullrun_pn_xmm0018741701_pi300-10000_cl_sm2.00.img.gz, (244, 231) - (319, 306)
[Sat May  4 01:57:17 2013] XMMSAS bgd. selection expression = annulus(24468.460022, 23273.845520, 1087.500000, 2175.000000, X, Y) && !ellipse(25527.630000, 25045.990200, 1089.432031, 1089.432031, 0.000000, X, Y) && !ellipse(25151.115800, 24961.869000, 1115.808032, 1115.808032, 0.000000, X, Y) && !ellipse(24751.218000, 24833.277200, 1151.144033, 731.849621, 333.244000, X, Y) && !ellipse(25656.894800, 24118.114000, 300.001609, 300.001609, 0.000000, X, Y) && !ellipse(26139.936000, 25691.386000, 1068.224031, 1068.224031, 0.000000, X, Y) && !ellipse(23257.493195, 25341.863770, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23790.338000, 24939.548000, 1209.848035, 1209.848035, 0.000000, X, Y) && !ellipse(27081.911560, 24735.136475, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22198.956000, 24367.776000, 1335.912038, 1335.912038, 0.000000, X, Y) && !ellipse(22637.403137, 24226.209839, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26544.920000, 23872.354000, 1203.224035, 1203.224035, 0.000000, X, Y) && !ellipse(27008.688507, 23534.720734, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24249.781189, 23502.661255, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23709.474762, 23804.219482, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26214.160370, 23426.536255, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24859.144928, 22997.427765, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May  4 01:57:17 2013] Writing fullrun_pn_xmm0018741701_pi300-10000_pass1_cl_src29.gif
[Sat May  4 02:05:45 2013] Mean detx,y = (-1090.11, -1571.18) 
[Sat May  4 02:05:48 2013] Setting backscal keywords in source and bgd. spectrum
[Sat May  4 02:06:10 2013] Binned source spectrum to 10 counts/bin
[Sat May  4 02:06:11 2013] Setting source spectrum file to fullrun_pn_xmm0018741701_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Sat May  4 02:06:11 2013] Setting bgd. spectrum file to fullrun_pn_xmm0018741701_pi300-10000_pass1_cl_src29_bgd.pi.gz
[Sat May  4 03:33:23 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat May  4 03:33:23 2013] rmf not generated due to insufficient counts
[Sat May  4 05:35:55 2013] Updating aperture counts using extracted products
[Sat May  4 05:35:55 2013] Total counts from fullrun_pn_xmm0018741701_pi300-10000_pass1_cl_src29_src_b10.pi.gz = 725.00
[Sat May  4 05:35:55 2013] Total counts from fullrun_pn_xmm0018741701_pi300-10000_pass1_cl_src29_bgd.pi.gz = 792.00
[Sat May  4 05:35:55 2013] Got source and background scale factors 1115372.000000, 3328587.000000
[Sat May  4 05:35:55 2013] User source parameters:
  Position = (281.8, 268.1) = 22 34 31.27 -37 45 21.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 459.6 +/- 27.9
  Background aperture counts = 265.4
  Rate = 0.1 +/- 0.006

[Sat May  4 05:35:55 2013] Updating counts from extracted products
[Sat May  4 05:35:55 2013] Set source signif. to 459.61/16.29 = 28.21
[Sat May  4 05:35:56 2013] Calculating source flux in energy range 0.30-8.00
[Sat May  4 05:35:56 2013] Using photon index=1.80, rate=0.102, arf fullrun_pn_xmm0018741701_pi300-10000_pass1_cl_src29.arf
[Sat May  4 05:35:56 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May  4 05:35:57 2013] Updating source flux to 3.3e-13
[Sat May  4 05:36:14 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat May  4 05:36:21 2013] xmm0018741701/analysis//spectral/fullrun_pn_xmm0018741701_pi300-10000_pass1_cl_src29_pl.csv not found, spectral fit skipped or did not complete