[Fri May  3 16:32:24 2013] Detection parameters:
  Position = (253.2, 281.1) = 22 34 41.76 -37 44 25.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 83.3 +/- 15.0
  Background counts = 35.8
  Rate = 0.02 +/- 0.004

[Fri May  3 16:32:24 2013] Off-axis axis estimate = 3.51'
[Fri May  3 16:33:42 2013] Using EEF radius (= 8.18 ")to estimate initial spatial extent for simple fitting
[Fri May  3 16:33:42 2013] Initial guess for spatial extent in simple fitting = 8.18"
[Fri May  3 16:33:42 2013] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.102
[Fri May  3 16:33:42 2013] Giving source the simple spatial ID 21 for pass 0, mean size = 8.18"
[Fri May  3 17:54:31 2013] fullrun_pn_xmm0018741701_pi300-10000_cl_pass0_src21.ximg exists
[Fri May  3 17:54:31 2013] fullrun_pn_xmm0018741701_pi300-10000_cl_pass0_src21_1.ximg exists
[Fri May  3 17:54:31 2013] Fit fullrun_pn_xmm0018741701_pi300-10000_cl_pass0_src21 appears to have run properly
[Fri May  3 17:54:31 2013] fullrun_pn_xmm0018741701_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Fri May  3 17:54:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018741701_pi300-10000_cl_pass0_tfrozen_src21.csv
[Fri May  3 17:54:31 2013] fullrun_pn_xmm0018741701_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Fri May  3 17:54:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018741701_pi300-10000_cl_pass0_tfrozen_src21.csv
[Fri May  3 17:54:31 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0018741701_pi300-10000_cl_pass0_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0018741701_pi300-10000_cl_pass0_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 21:45:34 2013] Spatial fit model total counts = 733.699000, observed total counts = 669.000000
[Fri May  3 21:45:34 2013] Offset between fit and detection position for source 21 = 2.659175 pixels
[Fri May  3 21:45:34 2013] 700.818000 total counts/ 606.514000 bgd. counts: snr = 3.829215
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 2.659175 pixels
  Position = (255.7, 282.1) = 22 34 40.86 -37 44 21.1
  Extent = 16.4 (11.0-32.7)" x 8.5 (2.8-16.4)", rotation angle = 45 (316-90) degrees
  Source counts = 94.3 +/- 26.5
  Background counts = 606.5
  Rate = 0.02 +/- 0.006
[Fri May  3 21:45:34 2013] Spatial fit model total counts = 626.977000, observed total counts = 618.000000
[Fri May  3 21:45:34 2013] Offset between fit and detection position for source 21 = 1.461656 pixels
[Fri May  3 21:45:34 2013] Warning, changing simple spatial fit ID from 21 to 25
[Fri May  3 21:45:34 2013] 599.174000 total counts/ 497.475000 bgd. counts: snr = 4.559645
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 1.461656 pixels
  Position = (255.7, 280.6) = 22 34 40.84 -37 44 27.4
  Extent = 16.7 (16.5-33.4)", rotation angle = 0
  Source counts = 101.7 +/- 24.5
  Background counts = 497.5
  Rate = 0.02 +/- 0.005
[Fri May  3 21:45:34 2013] Vigneting correction estimate = 1.000000
[Fri May  3 21:45:34 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  3 21:45:34 2013] Assessing source extent using major axis lower bound
[Fri May  3 21:45:34 2013] Source does appear to be extended
[Fri May  3 21:45:34 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  3 21:45:34 2013] Source is confused with source 19
[Fri May  3 21:45:51 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May  3 21:45:51 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri May  3 21:45:51 2013] Initial guess for spatial extent in simple fitting = 16.70"
[Fri May  3 21:45:51 2013] source mask rpix=3.8, npix_max = 75, mask sum = 80, frac = 1.062
[Fri May  3 21:45:51 2013] Giving source the simple spatial ID 14 for pass 1, mean size = 16.70"
[Fri May  3 22:59:26 2013] fullrun_pn_xmm0018741701_pi300-10000_cl_pass1_src14.ximg exists
[Fri May  3 22:59:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018741701_pi300-10000_cl_pass1_src14.csv
[Fri May  3 22:59:26 2013] fullrun_pn_xmm0018741701_pi300-10000_cl_pass1_src14_1.ximg exists
[Fri May  3 22:59:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018741701_pi300-10000_cl_pass1_src14.csv
[Fri May  3 22:59:26 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0018741701_pi300-10000_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0018741701_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 22:59:27 2013] fullrun_pn_xmm0018741701_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Fri May  3 22:59:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018741701_pi300-10000_cl_pass1_tfrozen_src14.csv
[Fri May  3 22:59:27 2013] fullrun_pn_xmm0018741701_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Fri May  3 22:59:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018741701_pi300-10000_cl_pass1_tfrozen_src14.csv
[Fri May  3 22:59:27 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0018741701_pi300-10000_cl_pass1_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0018741701_pi300-10000_cl_pass1_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  4 01:56:58 2013] Warning, spatial fit 14 centroid is now closest to src. 22
[Sat May  4 01:56:58 2013] Vigneting correction estimate = 1.000000
[Sat May  4 01:56:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May  4 01:56:58 2013] Assessing source extent using major axis lower bound
[Sat May  4 01:56:58 2013] Source does appear to be extended
[Sat May  4 01:56:58 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May  4 01:57:17 2013] XMMSAS src. selection expression = ellipse(22198.956000, 24367.776000, 1001.934029, 1001.934029, 0.000000, X, Y)
[Sat May  4 01:57:17 2013] Writing source region out to fullrun_pn_xmm0018741701_pi300-10000_pass1_cl_src21_src.reg
[Sat May  4 01:57:17 2013] Extracting stamp from image fullrun_pn_xmm0018741701_pi300-10000_cl_sm2.00.img.gz, (198, 223) - (313, 338)
[Sat May  4 01:57:17 2013] XMMSAS bgd. selection expression = annulus(22198.956000, 24367.776000, 1669.890048, 3339.780096, X, Y) && !ellipse(25527.630000, 25045.990200, 1089.432031, 1089.432031, 0.000000, X, Y) && !ellipse(25151.115800, 24961.869000, 1115.808032, 1115.808032, 0.000000, X, Y) && !ellipse(24751.218000, 24833.277200, 1151.144033, 731.849621, 333.244000, X, Y) && !ellipse(25656.894800, 24118.114000, 300.001609, 300.001609, 0.000000, X, Y) && !ellipse(22440.591800, 26089.885800, 456.823213, 430.425612, 217.470000, X, Y) && !ellipse(25365.461670, 26385.141602, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26139.936000, 25691.386000, 1068.224031, 1068.224031, 0.000000, X, Y) && !ellipse(23257.493195, 25341.863770, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23790.338000, 24939.548000, 1209.848035, 1209.848035, 0.000000, X, Y) && !ellipse(22637.403137, 24226.209839, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26544.920000, 23872.354000, 1203.224035, 1203.224035, 0.000000, X, Y) && !ellipse(24249.781189, 23502.661255, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24468.460022, 23273.845520, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23709.474762, 23804.219482, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26214.160370, 23426.536255, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24859.144928, 22997.427765, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May  4 01:57:17 2013] Writing fullrun_pn_xmm0018741701_pi300-10000_pass1_cl_src21.gif
[Sat May  4 02:03:02 2013] Mean detx,y = (1428.88, -1682.07) 
[Sat May  4 02:03:04 2013] Setting backscal keywords in source and bgd. spectrum
[Sat May  4 02:03:44 2013] Binned source spectrum to 10 counts/bin
[Sat May  4 02:03:44 2013] Setting source spectrum file to fullrun_pn_xmm0018741701_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Sat May  4 02:03:44 2013] Setting bgd. spectrum file to fullrun_pn_xmm0018741701_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Sat May  4 05:35:54 2013] Updating aperture counts using extracted products
[Sat May  4 05:35:54 2013] Total counts from fullrun_pn_xmm0018741701_pi300-10000_pass1_cl_src21_src_b10.pi.gz = 1071.00
[Sat May  4 05:35:54 2013] Total counts from fullrun_pn_xmm0018741701_pi300-10000_pass1_cl_src21_bgd.pi.gz = 2793.00
[Sat May  4 05:35:54 2013] Got source and background scale factors 2512354.000000, 16610678.000000
[Sat May  4 05:35:54 2013] User source parameters:
  Position = (255.7, 280.6) = 22 34 40.84 -37 44 27.4
  Extent = 16.7 (16.5-33.4)", rotation angle = 0
  Source aperture counts = 648.6 +/- 33.7
  Background aperture counts = 422.4
  Rate = 0.1 +/- 0.008

[Sat May  4 05:35:56 2013] Calculating source flux in energy range 0.30-8.00
[Sat May  4 05:35:56 2013] Using photon index=1.80, rate=0.0227, arf fullrun_pn_xmm0018741701_pi300-10000_pass1_cl_src21.arf
[Sat May  4 05:35:56 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May  4 05:35:56 2013] Updating source flux to 5.6e-14
[Sat May  4 05:36:14 2013] Flag c found in src. 21 procflags, skipping spectral fitting
[Sat May  4 05:36:21 2013] xmm0018741701/analysis//spectral/fullrun_pn_xmm0018741701_pi300-10000_pass1_cl_src21_pl.csv not found, spectral fit skipped or did not complete