[Fri May  3 16:33:03 2013] Detection parameters:
  Position = (269.0, 280.1) = 22 34 35.97 -37 44 26.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 72.7 +/- 13.4
  Background counts = 39.2
  Rate = 0.01 +/- 0.002

[Fri May  3 16:33:04 2013] Off-axis axis estimate = 2.52'
[Fri May  3 20:08:22 2013] Using EEF radius (= 7.69 ")to estimate initial spatial extent for simple fitting
[Fri May  3 20:08:22 2013] Initial guess for spatial extent in simple fitting = 7.69"
[Fri May  3 20:08:22 2013] source mask rpix=1.8, npix_max = 20, mask sum = 15, frac = 0.730
[Fri May  3 20:08:22 2013] Giving source the simple spatial ID 18 for pass 0, mean size = 7.69"
[Fri May  3 21:45:27 2013] fullrun_mos2_xmm0018741701_pi300-10000_cl_pass0_src18.ximg exists
[Fri May  3 21:45:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018741701_pi300-10000_cl_pass0_src18.csv
[Fri May  3 21:45:27 2013] fullrun_mos2_xmm0018741701_pi300-10000_cl_pass0_src18_1.ximg exists
[Fri May  3 21:45:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018741701_pi300-10000_cl_pass0_src18.csv
[Fri May  3 21:45:27 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018741701_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018741701_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 21:45:28 2013] fullrun_mos2_xmm0018741701_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Fri May  3 21:45:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018741701_pi300-10000_cl_pass0_tfrozen_src18.csv
[Fri May  3 21:45:28 2013] fullrun_mos2_xmm0018741701_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Fri May  3 21:45:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018741701_pi300-10000_cl_pass0_tfrozen_src18.csv
[Fri May  3 21:45:28 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018741701_pi300-10000_cl_pass0_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018741701_pi300-10000_cl_pass0_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 21:45:44 2013] Spatial fit model total counts = 773.191000, observed total counts = 661.000000
[Fri May  3 21:45:44 2013] Poor agreement between spatial fit and data for source 19
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May  3 21:45:44 2013] Spatial fit model total counts = 1003.190000, observed total counts = 895.000000
[Fri May  3 21:45:44 2013] Poor agreement between spatial fit and data for source 19
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May  3 21:45:44 2013] Vigneting correction estimate = 1.000000
[Fri May  3 21:45:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  3 21:45:44 2013] Assessing source extent using major
[Fri May  3 21:45:44 2013] Source does appear to be extended
[Fri May  3 21:45:44 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  3 21:45:44 2013] Source is confused with source 18
[Sat May  4 00:16:00 2013] Using EEF radius (= 7.69 ")to estimate initial spatial extent for simple fitting
[Sat May  4 00:16:00 2013] Initial guess for spatial extent in simple fitting = 7.69"
[Sat May  4 00:16:00 2013] source mask rpix=1.8, npix_max = 20, mask sum = 15, frac = 0.730
[Sat May  4 00:16:00 2013] Giving source the simple spatial ID 14 for pass 1, mean size = 7.69"
[Sat May  4 01:56:50 2013] fullrun_mos2_xmm0018741701_pi300-10000_cl_pass1_src14.ximg exists
[Sat May  4 01:56:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018741701_pi300-10000_cl_pass1_src14.csv
[Sat May  4 01:56:50 2013] fullrun_mos2_xmm0018741701_pi300-10000_cl_pass1_src14_1.ximg exists
[Sat May  4 01:56:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018741701_pi300-10000_cl_pass1_src14.csv
[Sat May  4 01:56:50 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018741701_pi300-10000_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018741701_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  4 01:56:51 2013] fullrun_mos2_xmm0018741701_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Sat May  4 01:56:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018741701_pi300-10000_cl_pass1_tfrozen_src14.csv
[Sat May  4 01:56:51 2013] fullrun_mos2_xmm0018741701_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Sat May  4 01:56:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018741701_pi300-10000_cl_pass1_tfrozen_src14.csv
[Sat May  4 01:56:51 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018741701_pi300-10000_cl_pass1_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018741701_pi300-10000_cl_pass1_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  4 01:57:09 2013] Spatial fit model total counts = 776.330000, observed total counts = 661.000000
[Sat May  4 01:57:09 2013] Poor agreement between spatial fit and data for source 19
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat May  4 01:57:09 2013] Spatial fit model total counts = 800.067000, observed total counts = 700.000000
[Sat May  4 01:57:09 2013] Poor agreement between spatial fit and data for source 19
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat May  4 01:57:09 2013] Vigneting correction estimate = 1.000000
[Sat May  4 01:57:09 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May  4 01:57:09 2013] Assessing source extent using major
[Sat May  4 01:57:09 2013] Source does appear to be extended
[Sat May  4 01:57:09 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May  4 04:30:08 2013] XMMSAS src. selection expression = ellipse(23353.323822, 24316.889709, 652.500000, 652.500000, 0.000000, X, Y)
[Sat May  4 04:30:08 2013] Writing source region out to fullrun_mos2_xmm0018741701_pi300-10000_pass1_cl_src19_src.reg
[Sat May  4 04:30:08 2013] Extracting stamp from image fullrun_mos2_xmm0018741701_pi300-10000_cl_sm2.00.img.gz, (231, 243) - (306, 318)
[Sat May  4 04:30:08 2013] XMMSAS bgd. selection expression = annulus(23353.323822, 24316.889709, 1087.500000, 2175.000000, X, Y) && !ellipse(22452.440521, 26110.231903, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25685.321420, 24115.651000, 279.456008, 279.456008, 0.000000, X, Y) && !ellipse(25342.910580, 25259.552380, 1090.432031, 1090.432031, 0.000000, X, Y) && !ellipse(25382.884000, 24623.686000, 2327.728067, 1819.424052, 1.287000, X, Y) && !ellipse(25898.352600, 24743.252899, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24281.706000, 24370.413000, 1163.864033, 1163.864033, 0.000000, X, Y) && !ellipse(26624.989400, 23431.128000, 1178.576034, 1178.576034, 0.000000, X, Y) && !ellipse(24726.709412, 23796.190674, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24811.518000, 24936.566000, 2371.504068, 2371.504068, 0.000000, X, Y) && !ellipse(26727.200000, 25222.106000, 1744.512050, 435.907213, 359.480535, X, Y) && !ellipse(26387.116000, 23785.998000, 2357.152068, 2357.152068, 0.000000, X, Y) && !ellipse(25677.148000, 25704.276000, 1027.048030, 1027.048030, 0.000000, X, Y) && !ellipse(24961.552063, 23303.547333, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23799.960815, 24517.798431, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23566.251862, 25716.509644, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22825.894287, 25172.422455, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May  4 04:30:08 2013] Writing fullrun_mos2_xmm0018741701_pi300-10000_pass1_cl_src19.gif
[Sat May  4 04:36:14 2013] Mean detx,y = (-196.82, 980.52) 
[Sat May  4 04:36:15 2013] Setting backscal keywords in source and bgd. spectrum
[Sat May  4 04:36:25 2013] Binned source spectrum to 10 counts/bin
[Sat May  4 04:36:26 2013] Setting source spectrum file to fullrun_mos2_xmm0018741701_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Sat May  4 04:36:26 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0018741701_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Sat May  4 05:34:24 2013] Not generating rmf since there are only 72 counts
[Sat May  4 05:34:24 2013] rmf not generated due to insufficient counts
[Sat May  4 05:36:02 2013] Updating aperture counts using extracted products
[Sat May  4 05:36:02 2013] Total counts from fullrun_mos2_xmm0018741701_pi300-10000_pass1_cl_src19_src_b10.pi.gz = 457.00
[Sat May  4 05:36:02 2013] Total counts from fullrun_mos2_xmm0018741701_pi300-10000_pass1_cl_src19_bgd.pi.gz = 637.00
[Sat May  4 05:36:02 2013] Got source and background scale factors 1106248.000000, 4019904.000000
[Sat May  4 05:36:02 2013] User source parameters:
  Position = (269.0, 280.1) = 22 34 35.97 -37 44 26.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 281.7 +/- 22.4
  Background aperture counts = 175.3
  Rate = 0.04 +/- 0.003

[Sat May  4 05:36:02 2013] Updating counts from extracted products
[Sat May  4 05:36:02 2013] Set source signif. to 281.70/13.24 = 21.28
[Sat May  4 05:36:03 2013] Calculating source flux in energy range 0.30-8.00
[Sat May  4 05:36:03 2013] Using photon index=1.80, rate=0.0396, arf fullrun_mos2_xmm0018741701_pi300-10000_pass1_cl_src19.arf
[Sat May  4 05:36:03 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May  4 05:36:03 2013] Updating source flux to 4.1e-13
[Sat May  4 05:36:09 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat May  4 05:36:14 2013] xmm0018741701/analysis//spectral/fullrun_mos2_xmm0018741701_pi300-10000_pass1_cl_src19_pl.csv not found, spectral fit skipped or did not complete