[Fri May 3 16:32:45 2013] Detection parameters: Position = (268.8, 298.0) = 22 34 36.03 -37 43 11.5 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 43.1 +/- 11.4 Background counts = 22.0 Rate = 0.006 +/- 0.002 [Fri May 3 16:32:45 2013] Off-axis axis estimate = 2.15' [Fri May 3 17:54:32 2013] Using EEF radius (= 7.50 ")to estimate initial spatial extent for simple fitting [Fri May 3 17:54:32 2013] Initial guess for spatial extent in simple fitting = 7.50" [Fri May 3 17:54:32 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.808 [Fri May 3 17:54:32 2013] Giving source the simple spatial ID 35 for pass 0, mean size = 7.50" [Fri May 3 20:08:21 2013] fullrun_mos1_xmm0018741701_pi300-10000_cl_pass0_src35.ximg exists [Fri May 3 20:08:21 2013] fullrun_mos1_xmm0018741701_pi300-10000_cl_pass0_src35_1.ximg exists [Fri May 3 20:08:21 2013] Fit fullrun_mos1_xmm0018741701_pi300-10000_cl_pass0_src35 appears to have run properly [Fri May 3 20:08:22 2013] fullrun_mos1_xmm0018741701_pi300-10000_cl_pass0_tfrozen_src35.ximg exists [Fri May 3 20:08:22 2013] fullrun_mos1_xmm0018741701_pi300-10000_cl_pass0_tfrozen_src35_1.ximg exists [Fri May 3 20:08:22 2013] Fit fullrun_mos1_xmm0018741701_pi300-10000_cl_pass0_tfrozen_src35 appears to have run properly [Fri May 3 21:45:39 2013] Spatial fit model total counts = 537.320000, observed total counts = 540.000000 [Fri May 3 21:45:39 2013] Offset between fit and detection position for source 36 = 6.702572 pixels [Fri May 3 21:45:39 2013] Warning, changing simple spatial fit ID from 35 to 34 [Fri May 3 21:45:39 2013] 508.686800 total counts/ 424.408000 bgd. counts: snr = 4.090973 Spatial fit parameters: Offset between fit and detection position for source 36 = 6.702572 pixels Position = (262.1, 298.1) = 22 34 38.49 -37 43 11.5 Extent = 15.0 (13.1-30.0)" x 3.7 (2.5-5.4)", rotation angle = 74 (67-80) degrees Source counts = 84.3 +/- 22.6 Background counts = 424.4 Rate = 0.01 +/- 0.003 [Fri May 3 21:45:39 2013] Vigneting correction estimate = 1.000000 [Fri May 3 21:45:39 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri May 3 21:45:39 2013] Assessing source extent using major axis lower bound [Fri May 3 21:45:39 2013] Source does appear to be extended [Fri May 3 21:45:39 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.45 [Fri May 3 21:45:39 2013] Source is asymmetric [Fri May 3 21:45:39 2013] Source is confused with source 9 [Fri May 3 22:59:27 2013] Using previous fit value to estimate initial spatial extent for simple fitting [Fri May 3 22:59:27 2013] Initial guess for spatial extent in simple fitting = 9.33" [Fri May 3 22:59:27 2013] source mask rpix=2.1, npix_max = 27, mask sum = 36, frac = 1.287 [Fri May 3 22:59:27 2013] Giving source the simple spatial ID 25 for pass 1, mean size = 9.33" [Sat May 4 00:16:00 2013] fullrun_mos1_xmm0018741701_pi300-10000_cl_pass1_src25.ximg exists [Sat May 4 00:16:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018741701_pi300-10000_cl_pass1_src25.csv [Sat May 4 00:16:00 2013] fullrun_mos1_xmm0018741701_pi300-10000_cl_pass1_src25_1.ximg exists [Sat May 4 00:16:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018741701_pi300-10000_cl_pass1_src25.csv [Sat May 4 00:16:00 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0018741701_pi300-10000_cl_pass1_src25_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0018741701_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat May 4 00:16:00 2013] fullrun_mos1_xmm0018741701_pi300-10000_cl_pass1_tfrozen_src25.ximg exists [Sat May 4 00:16:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018741701_pi300-10000_cl_pass1_tfrozen_src25.csv [Sat May 4 00:16:00 2013] fullrun_mos1_xmm0018741701_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists [Sat May 4 00:16:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018741701_pi300-10000_cl_pass1_tfrozen_src25.csv [Sat May 4 00:16:00 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0018741701_pi300-10000_cl_pass1_tfrozen_src25_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0018741701_pi300-10000_cl_pass1_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat May 4 01:57:04 2013] Source 36 is offset by 3.693264 and -0.931494 pixels which is larger than 2 X fitted extent = 3.282032 x 1.879825, not incorporating fit results [Sat May 4 01:57:04 2013] Spatial fit model total counts = 641.210000, observed total counts = 637.000000 [Sat May 4 01:57:04 2013] Offset between fit and detection position for source 36 = 2.332340 pixels [Sat May 4 01:57:04 2013] Warning, changing simple spatial fit ID from 25 to 20 [Sat May 4 01:57:04 2013] 643.535900 total counts/ 581.755000 bgd. counts: snr = 2.561440 Spatial fit parameters: Offset between fit and detection position for source 36 = 2.332340 pixels Position = (259.9, 297.3) = 22 34 39.29 -37 43 15.1 Extent = 8.0 (2.5-11.0)", rotation angle = 0 Source counts = 61.8 +/- 25.4 Background counts = 581.8 Rate = 0.009 +/- 0.004 [Sat May 4 01:57:04 2013] Vigneting correction estimate = 1.000000 [Sat May 4 01:57:04 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat May 4 01:57:04 2013] Assessing source extent using major axis lower bound [Sat May 4 01:57:04 2013] Source does appear to be extended [Sat May 4 01:57:04 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sat May 4 03:41:41 2013] XMMSAS src. selection expression = ellipse(22565.632400, 25814.284000, 480.157814, 480.157814, 0.000000, X, Y) [Sat May 4 03:41:41 2013] Writing source region out to fullrun_mos1_xmm0018741701_pi300-10000_pass1_cl_src36_src.reg [Sat May 4 03:41:41 2013] Extracting stamp from image fullrun_mos1_xmm0018741701_pi300-10000_cl_sm2.00.img.gz, (232, 270) - (288, 325) [Sat May 4 03:41:41 2013] XMMSAS bgd. selection expression = annulus(22565.632400, 25814.284000, 800.263023, 1600.526046, X, Y) && !ellipse(22429.093200, 26089.665200, 414.785612, 414.785612, 0.000000, X, Y) && !ellipse(25220.385200, 24941.257000, 1114.576032, 1114.576032, 0.000000, X, Y) && !ellipse(25490.658000, 24995.888000, 2146.912062, 2146.912062, 0.000000, X, Y) && !ellipse(24851.179840, 22858.861786, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(23036.196503, 25277.550995, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24199.770000, 26320.164000, 1110.280032, 455.189613, 336.871000, X, Y) && !ellipse(22457.819611, 25089.643951, 870.000000, 870.000000, 0.000000, X, Y) [Sat May 4 03:41:41 2013] Writing fullrun_mos1_xmm0018741701_pi300-10000_pass1_cl_src36.gif [Sat May 4 03:45:49 2013] Mean detx,y = (189.12, 1697.39) [Sat May 4 03:45:51 2013] Setting backscal keywords in source and bgd. spectrum [Sat May 4 03:46:04 2013] Binned source spectrum to 10 counts/bin [Sat May 4 03:46:05 2013] Setting source spectrum file to fullrun_mos1_xmm0018741701_pi300-10000_pass1_cl_src36_src_b10.pi.gz [Sat May 4 03:46:05 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0018741701_pi300-10000_pass1_cl_src36_bgd.pi.gz [Sat May 4 04:30:03 2013] Not generating rmf since there are only 61 counts [Sat May 4 04:30:03 2013] rmf not generated due to insufficient counts [Sat May 4 05:35:59 2013] Updating aperture counts using extracted products [Sat May 4 05:35:59 2013] Total counts from fullrun_mos1_xmm0018741701_pi300-10000_pass1_cl_src36_src_b10.pi.gz = 1568.00 [Sat May 4 05:35:59 2013] Total counts from fullrun_mos1_xmm0018741701_pi300-10000_pass1_cl_src36_bgd.pi.gz = 381.00 [Sat May 4 05:35:59 2013] Got source and background scale factors 715200.000000, 2947700.000000 [Sat May 4 05:35:59 2013] User source parameters: Position = (259.9, 297.3) = 22 34 39.29 -37 43 15.1 Extent = 8.0 (2.5-11.0)", rotation angle = 0 Source aperture counts = 1475.6 +/- 40.6 Background aperture counts = 92.4 Rate = 0.2 +/- 0.006 [Sat May 4 05:36:00 2013] Calculating source flux in energy range 0.30-8.00 [Sat May 4 05:36:00 2013] Using photon index=1.80, rate=0.00869, arf fullrun_mos1_xmm0018741701_pi300-10000_pass1_cl_src36.arf [Sat May 4 05:36:00 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sat May 4 05:36:00 2013] Updating source flux to 9e-14 [Sat May 4 05:36:04 2013] Flag b found in src. 36 procflags, skipping spectral fitting [Sat May 4 05:36:04 2013] Flag c found in src. 36 procflags, skipping spectral fitting [Sat May 4 05:36:04 2013] Source 36 has fewer than 100.000000 counts, skipping spectral fitting [Sat May 4 05:36:09 2013] xmm0018741701/analysis//spectral/fullrun_mos1_xmm0018741701_pi300-10000_pass1_cl_src36_pl.csv not found, spectral fit skipped or did not complete