[Fri May 10 21:21:34 2013] Detection parameters:
  Position = (313.5, 336.5) = 15 40 3.83 -3 17 25.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 83.0 +/- 14.0
  Background counts = 48.4
  Rate = 0.02 +/- 0.004

[Fri May 10 21:21:35 2013] Off-axis axis estimate = 2.97'
[Fri May 10 21:21:50 2013] Using EEF radius (= 7.91 ")to estimate initial spatial extent for simple fitting
[Fri May 10 21:21:50 2013] Initial guess for spatial extent in simple fitting = 7.91"
[Fri May 10 21:21:50 2013] source mask rpix=1.8, npix_max = 21, mask sum = 14, frac = 0.651
[Fri May 10 21:21:50 2013] Giving source the simple spatial ID 8 for pass 0, mean size = 7.91"
[Fri May 10 21:21:50 2013] fullrun_pn_xmm0018741101_pi300-10000_cl_pass0_src8.ximg exists
[Fri May 10 21:21:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018741101_pi300-10000_cl_pass0_src8.csv
[Fri May 10 21:21:50 2013] fullrun_pn_xmm0018741101_pi300-10000_cl_pass0_src8_1.ximg exists
[Fri May 10 21:21:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018741101_pi300-10000_cl_pass0_src8.csv
[Fri May 10 21:21:50 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0018741101_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0018741101_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 10 21:21:51 2013] fullrun_pn_xmm0018741101_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Fri May 10 21:21:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018741101_pi300-10000_cl_pass0_tfrozen_src8.csv
[Fri May 10 21:21:51 2013] fullrun_pn_xmm0018741101_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Fri May 10 21:21:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018741101_pi300-10000_cl_pass0_tfrozen_src8.csv
[Fri May 10 21:21:51 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0018741101_pi300-10000_cl_pass0_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0018741101_pi300-10000_cl_pass0_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 10 21:21:57 2013] Source 8 is offset by -6.046046 and -4.971268 pixels which is larger than
2 X fitted extent = 1.302625 x 1.302625, not incorporating fit results
[Fri May 10 21:21:57 2013] Vigneting correction estimate = 1.000000
[Fri May 10 21:21:57 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 10 21:21:57 2013] Assessing source extent using major
[Fri May 10 21:21:57 2013] Source does appear to be extended
[Fri May 10 21:21:57 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 10 21:22:11 2013] Using EEF radius (= 7.91 ")to estimate initial spatial extent for simple fitting
[Fri May 10 21:22:11 2013] Initial guess for spatial extent in simple fitting = 7.91"
[Fri May 10 21:22:11 2013] source mask rpix=1.8, npix_max = 21, mask sum = 14, frac = 0.651
[Fri May 10 21:22:11 2013] Giving source the simple spatial ID 8 for pass 1, mean size = 7.91"
[Fri May 10 21:22:12 2013] fullrun_pn_xmm0018741101_pi300-10000_cl_pass1_src8.ximg exists
[Fri May 10 21:22:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018741101_pi300-10000_cl_pass1_src8.csv
[Fri May 10 21:22:12 2013] fullrun_pn_xmm0018741101_pi300-10000_cl_pass1_src8_1.ximg exists
[Fri May 10 21:22:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018741101_pi300-10000_cl_pass1_src8.csv
[Fri May 10 21:22:12 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0018741101_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0018741101_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 10 21:22:12 2013] fullrun_pn_xmm0018741101_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Fri May 10 21:22:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018741101_pi300-10000_cl_pass1_tfrozen_src8.csv
[Fri May 10 21:22:12 2013] fullrun_pn_xmm0018741101_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Fri May 10 21:22:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018741101_pi300-10000_cl_pass1_tfrozen_src8.csv
[Fri May 10 21:22:12 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0018741101_pi300-10000_cl_pass1_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0018741101_pi300-10000_cl_pass1_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 10 21:22:18 2013] Source 8 is offset by -5.764069 and -0.599113 pixels which is larger than
2 X fitted extent = 0.909614 x 0.909614, not incorporating fit results
[Fri May 10 21:22:18 2013] Vigneting correction estimate = 1.000000
[Fri May 10 21:22:18 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 10 21:22:18 2013] Assessing source extent using major
[Fri May 10 21:22:18 2013] Source does appear to be extended
[Fri May 10 21:22:18 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 10 21:22:30 2013] XMMSAS src. selection expression = ellipse(27226.000000, 29229.957703, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May 10 21:22:30 2013] Not overwriting source region fullrun_pn_xmm0018741101_pi300-10000_pass1_cl_src8_src.reg
[Fri May 10 21:22:30 2013] Extracting stamp from image fullrun_pn_xmm0018741101_pi300-10000_cl_sm2.00.img.gz, (276, 299) - (351, 374)
[Fri May 10 21:22:30 2013] XMMSAS bgd. selection expression = annulus(27226.000000, 29229.957703, 1087.500000, 2175.000000, X, Y) && !ellipse(26334.342926, 29059.834045, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25357.138153, 28864.986755, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25866.950000, 28009.426000, 1131.848033, 1131.848033, 0.000000, X, Y) && !ellipse(26582.916000, 27572.598000, 1128.192032, 1128.192032, 0.000000, X, Y) && !ellipse(25153.152252, 29931.342102, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24915.304108, 28721.599243, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27793.305420, 28052.749573, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27377.296844, 27278.731537, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25363.008423, 27362.813660, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27008.534515, 26934.506989, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27201.268402, 26401.079742, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May 10 21:22:30 2013] Writing fullrun_pn_xmm0018741101_pi300-10000_pass1_cl_src8.gif
[Fri May 10 21:22:30 2013] ../../xmm0018741101/products/events/fullrun_pn_xmm0018741101_pi300-10000_pass1_cl_src8_src.evt and ../../xmm0018741101/products/events/fullrun_pn_xmm0018741101_pi300-10000_pass1_cl_src8_bgd.evt exist, delete to re-create
[Fri May 10 21:22:30 2013] Mean detx,y = (927.06, -1458.98) 
[Fri May 10 21:22:30 2013] ../../xmm0018741101/products/images/fullrun_pn_xmm0018741101_pi300-10000_pass1_cl_src8_src.img and ../../xmm0018741101/products/images/fullrun_pn_xmm0018741101_pi300-10000_pass1_cl_src8_bgd.img exist, delete to re-create
[Fri May 10 21:22:30 2013] ../../xmm0018741101/products/spectra/fullrun_pn_xmm0018741101_pi300-10000_pass1_cl_src8_src.pi and ../../xmm0018741101/products/spectra/fullrun_pn_xmm0018741101_pi300-10000_pass1_cl_src8_bgd.pi exist, delete to re-create
[Fri May 10 21:22:30 2013] Setting source spectrum file to fullrun_pn_xmm0018741101_pi300-10000_pass1_cl_src8_src.pi.gz
[Fri May 10 21:22:30 2013] Setting bgd. spectrum file to fullrun_pn_xmm0018741101_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Fri May 10 21:22:30 2013] ../../xmm0018741101/products/lightcurves/fullrun_pn_xmm0018741101_pi300-10000_pass1_cl_src8_src.lc and ../../xmm0018741101/products/lightcurves/fullrun_pn_xmm0018741101_pi300-10000_pass1_cl_src8_bgd.lc exist, delete to re-create
[Fri May 10 21:22:32 2013] Not generating rmf since there are only 82 counts
[Fri May 10 21:22:32 2013] rmf not generated due to insufficient counts
[Fri May 10 21:44:34 2013] Updating aperture counts using extracted products
[Fri May 10 21:44:34 2013] Total counts from fullrun_pn_xmm0018741101_pi300-10000_pass1_cl_src8_src.pi.gz = 323.00
[Fri May 10 21:44:34 2013] Total counts from fullrun_pn_xmm0018741101_pi300-10000_pass1_cl_src8_bgd.pi.gz = 926.00
[Fri May 10 21:44:34 2013] Got source and background scale factors 885491.000000, 4881052.000000
[Fri May 10 21:44:34 2013] User source parameters:
  Position = (313.5, 336.5) = 15 40 3.83 -3 17 25.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 155.0 +/- 19.0
  Background aperture counts = 168.0
  Rate = 0.04 +/- 0.004

[Fri May 10 21:44:34 2013] Updating counts from extracted products
[Fri May 10 21:44:34 2013] Set source signif. to 155.01/12.96 = 11.96
[Fri May 10 21:44:36 2013] No arf file for this source, not re-computing flux
[Fri May 10 21:44:42 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri May 10 21:44:43 2013] xmm0018741101/analysis//spectral/fullrun_pn_xmm0018741101_pi300-10000_pass1_cl_src8_pl.csv not found, spectral fit skipped or did not complete