[Fri May 10 21:21:36 2013] Detection parameters:
  Position = (288.5, 328.1) = 15 40 11.10 -3 17 57.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 87.3 +/- 14.6
  Background counts = 22.5
  Rate = 0.01 +/- 0.002

[Fri May 10 21:21:36 2013] Off-axis axis estimate = 2.27'
[Fri May 10 21:21:52 2013] Using EEF radius (= 7.56 ")to estimate initial spatial extent for simple fitting
[Fri May 10 21:21:52 2013] Initial guess for spatial extent in simple fitting = 7.56"
[Fri May 10 21:21:52 2013] source mask rpix=1.7, npix_max = 20, mask sum = 18, frac = 0.898
[Fri May 10 21:21:52 2013] Giving source the simple spatial ID 8 for pass 0, mean size = 7.56"
[Fri May 10 21:21:53 2013] fullrun_mos2_xmm0018741101_pi300-10000_cl_pass0_src8.ximg exists
[Fri May 10 21:21:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018741101_pi300-10000_cl_pass0_src8.csv
[Fri May 10 21:21:53 2013] fullrun_mos2_xmm0018741101_pi300-10000_cl_pass0_src8_1.ximg exists
[Fri May 10 21:21:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018741101_pi300-10000_cl_pass0_src8.csv
[Fri May 10 21:21:53 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018741101_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018741101_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 10 21:21:53 2013] fullrun_mos2_xmm0018741101_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Fri May 10 21:21:53 2013] fullrun_mos2_xmm0018741101_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Fri May 10 21:21:53 2013] Fit fullrun_mos2_xmm0018741101_pi300-10000_cl_pass0_tfrozen_src8 appears to have run properly
[Fri May 10 21:22:04 2013] Warning, spatial fit 8 centroid is now closest to src. 2
[Fri May 10 21:22:04 2013] Source 8 is offset by 1.706320 and -4.057630 pixels which is larger than
2 X fitted extent = 1.411205 x 1.411205, not incorporating fit results
[Fri May 10 21:22:04 2013] Spatial fit model total counts = 611.401000, observed total counts = 616.000000
[Fri May 10 21:22:04 2013] Offset between fit and detection position for source 8 = 2.281534 pixels
[Fri May 10 21:22:04 2013] Warning, changing simple spatial fit ID from 8 to 14
[Fri May 10 21:22:04 2013] 559.763300 total counts/ 510.959000 bgd. counts: snr = 2.159062
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 2.281534 pixels
  Position = (287.9, 330.3) = 15 40 11.27 -3 17 49.6
  Extent = 9.3 (3.1-15.0)", rotation angle = 0
  Source counts = 48.8 +/- 23.7
  Background counts = 511.0
  Rate = 0.006 +/- 0.003
[Fri May 10 21:22:04 2013] Vigneting correction estimate = 1.000000
[Fri May 10 21:22:04 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 10 21:22:04 2013] Assessing source extent using major axis lower bound
[Fri May 10 21:22:04 2013] Source does appear to be extended
[Fri May 10 21:22:04 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 10 21:22:04 2013] Source is confused with source 1
[Fri May 10 21:22:13 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 10 21:22:13 2013] Initial guess for spatial extent in simple fitting = 9.29"
[Fri May 10 21:22:13 2013] source mask rpix=2.1, npix_max = 27, mask sum = 24, frac = 0.864
[Fri May 10 21:22:13 2013] Giving source the simple spatial ID 6 for pass 1, mean size = 9.29"
[Fri May 10 21:22:13 2013] fullrun_mos2_xmm0018741101_pi300-10000_cl_pass1_src6.ximg exists
[Fri May 10 21:22:13 2013] fullrun_mos2_xmm0018741101_pi300-10000_cl_pass1_src6_1.ximg exists
[Fri May 10 21:22:14 2013] Fit fullrun_mos2_xmm0018741101_pi300-10000_cl_pass1_src6 appears to have run properly
[Fri May 10 21:22:14 2013] fullrun_mos2_xmm0018741101_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Fri May 10 21:22:14 2013] fullrun_mos2_xmm0018741101_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Fri May 10 21:22:14 2013] Fit fullrun_mos2_xmm0018741101_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Fri May 10 21:22:23 2013] Source 8 is offset by 1.431347 and -1.784048 pixels which is larger than
2 X fitted extent = 1.492423 x 1.492423, not incorporating fit results
[Fri May 10 21:22:23 2013] Source 8 is offset by 1.129448 and -1.829678 pixels which is larger than
2 X fitted extent = 1.420887 x 1.420887, not incorporating fit results
[Fri May 10 21:22:23 2013] Source 8 is offset by 1.284506 and -1.306759 pixels which is larger than
2 X fitted extent = 1.020749 x 1.020749, not incorporating fit results
[Fri May 10 21:22:23 2013] Vigneting correction estimate = 1.000000
[Fri May 10 21:22:23 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 10 21:22:23 2013] Assessing source extent using major axis lower bound
[Fri May 10 21:22:23 2013] Source does appear to be extended
[Fri May 10 21:22:23 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 10 21:38:04 2013] XMMSAS src. selection expression = ellipse(24999.166000, 28686.800000, 557.460016, 557.460016, 0.000000, X, Y)
[Fri May 10 21:38:04 2013] Writing source region out to fullrun_mos2_xmm0018741101_pi300-10000_pass1_cl_src8_src.reg
[Fri May 10 21:38:04 2013] Extracting stamp from image fullrun_mos2_xmm0018741101_pi300-10000_cl_sm2.00.img.gz, (256, 298) - (320, 362)
[Fri May 10 21:38:04 2013] XMMSAS bgd. selection expression = annulus(24999.166000, 28686.800000, 929.100027, 1858.200053, X, Y) && !ellipse(26179.731600, 27859.346400, 1160.704033, 1160.704033, 0.000000, X, Y) && !ellipse(25584.645800, 28741.151760, 577.849617, 577.849617, 0.000000, X, Y) && !ellipse(26684.682007, 27801.947540, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25102.844000, 28131.156000, 1228.248035, 1228.248035, 0.000000, X, Y) && !ellipse(24642.465332, 27603.354004, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27355.605255, 26673.331757, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25743.203308, 26756.906769, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24598.471497, 28167.085754, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25238.853943, 27365.163361, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25284.446106, 26937.231049, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27010.411621, 26318.901276, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May 10 21:38:04 2013] Writing fullrun_mos2_xmm0018741101_pi300-10000_pass1_cl_src8.gif
[Fri May 10 21:38:48 2013] Mean detx,y = (1454.92, 1226.18) 
[Fri May 10 21:38:49 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May 10 21:38:54 2013] Binned source spectrum to 10 counts/bin
[Fri May 10 21:38:54 2013] Setting source spectrum file to fullrun_mos2_xmm0018741101_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Fri May 10 21:38:54 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0018741101_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Fri May 10 21:43:37 2013] Not generating rmf since there are only 48 counts
[Fri May 10 21:43:37 2013] rmf not generated due to insufficient counts
[Fri May 10 21:44:38 2013] Updating aperture counts using extracted products
[Fri May 10 21:44:38 2013] Total counts from fullrun_mos2_xmm0018741101_pi300-10000_pass1_cl_src8_src_b10.pi.gz = 419.00
[Fri May 10 21:44:38 2013] Total counts from fullrun_mos2_xmm0018741101_pi300-10000_pass1_cl_src8_bgd.pi.gz = 813.00
[Fri May 10 21:44:38 2013] Got source and background scale factors 845548.000000, 4221656.000000
[Fri May 10 21:44:38 2013] User source parameters:
  Position = (287.9, 330.3) = 15 40 11.27 -3 17 49.6
  Extent = 9.3 (3.1-15.0)", rotation angle = 0
  Source aperture counts = 256.2 +/- 21.5
  Background aperture counts = 162.8
  Rate = 0.03 +/- 0.003

[Fri May 10 21:44:39 2013] Calculating source flux in energy range 0.30-8.00
[Fri May 10 21:44:39 2013] Using photon index=1.80, rate=0.00641, arf fullrun_mos2_xmm0018741101_pi300-10000_pass1_cl_src8.arf
[Fri May 10 21:44:39 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 10 21:44:39 2013] Updating source flux to 7.3e-14
[Fri May 10 21:44:41 2013] Flag b found in src. 8 procflags, skipping spectral fitting
[Fri May 10 21:44:41 2013] Flag c found in src. 8 procflags, skipping spectral fitting
[Fri May 10 21:44:41 2013] Source 8 has fewer than 100.000000 counts, skipping spectral fitting
[Fri May 10 21:44:42 2013] xmm0018741101/analysis//spectral/fullrun_mos2_xmm0018741101_pi300-10000_pass1_cl_src8_pl.csv not found, spectral fit skipped or did not complete