[Fri May 10 21:21:36 2013] Detection parameters: Position = (290.7, 315.1) = 15 40 10.47 -3 18 55.9 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 59.6 +/- 12.9 Background counts = 21.7 Rate = 0.008 +/- 0.002 [Fri May 10 21:21:36 2013] Off-axis axis estimate = 1.33' [Fri May 10 21:21:52 2013] Using EEF radius (= 7.10 ")to estimate initial spatial extent for simple fitting [Fri May 10 21:21:52 2013] Initial guess for spatial extent in simple fitting = 7.10" [Fri May 10 21:21:52 2013] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.881 [Fri May 10 21:21:52 2013] Giving source the simple spatial ID 15 for pass 0, mean size = 7.10" [Fri May 10 21:21:53 2013] fullrun_mos2_xmm0018741101_pi300-10000_cl_pass0_src15.ximg exists [Fri May 10 21:21:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018741101_pi300-10000_cl_pass0_src15.csv [Fri May 10 21:21:53 2013] fullrun_mos2_xmm0018741101_pi300-10000_cl_pass0_src15_1.ximg exists [Fri May 10 21:21:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018741101_pi300-10000_cl_pass0_src15.csv [Fri May 10 21:21:53 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0018741101_pi300-10000_cl_pass0_src15_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0018741101_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri May 10 21:21:53 2013] fullrun_mos2_xmm0018741101_pi300-10000_cl_pass0_tfrozen_src15.ximg exists [Fri May 10 21:21:53 2013] fullrun_mos2_xmm0018741101_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists [Fri May 10 21:21:53 2013] Fit fullrun_mos2_xmm0018741101_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly [Fri May 10 21:22:04 2013] Warning, spatial fit 15 centroid is now closest to src. 4 [Fri May 10 21:22:04 2013] Source 17 is offset by -5.822345 and -0.923019 pixels which is larger than 2 X fitted extent = 1.910382 x 1.910382, not incorporating fit results [Fri May 10 21:22:04 2013] Vigneting correction estimate = 1.000000 [Fri May 10 21:22:04 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri May 10 21:22:04 2013] Assessing source extent using major [Fri May 10 21:22:04 2013] Source does appear to be extended [Fri May 10 21:22:04 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Fri May 10 21:22:04 2013] Source is confused with source 16 [Fri May 10 21:22:13 2013] Using EEF radius (= 7.10 ")to estimate initial spatial extent for simple fitting [Fri May 10 21:22:13 2013] Initial guess for spatial extent in simple fitting = 7.10" [Fri May 10 21:22:13 2013] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.881 [Fri May 10 21:22:13 2013] Giving source the simple spatial ID 13 for pass 1, mean size = 7.10" [Fri May 10 21:22:14 2013] fullrun_mos2_xmm0018741101_pi300-10000_cl_pass1_src13.ximg exists [Fri May 10 21:22:14 2013] fullrun_mos2_xmm0018741101_pi300-10000_cl_pass1_src13_1.ximg exists [Fri May 10 21:22:14 2013] Fit fullrun_mos2_xmm0018741101_pi300-10000_cl_pass1_src13 appears to have run properly [Fri May 10 21:22:14 2013] fullrun_mos2_xmm0018741101_pi300-10000_cl_pass1_tfrozen_src13.ximg exists [Fri May 10 21:22:14 2013] fullrun_mos2_xmm0018741101_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists [Fri May 10 21:22:14 2013] Fit fullrun_mos2_xmm0018741101_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly [Fri May 10 21:22:23 2013] Warning, spatial fit 13 centroid is now closest to src. 4 [Fri May 10 21:22:23 2013] Source 17 is offset by -5.850506 and -0.820191 pixels which is larger than 2 X fitted extent = 1.858671 x 1.858671, not incorporating fit results [Fri May 10 21:22:23 2013] Vigneting correction estimate = 1.000000 [Fri May 10 21:22:23 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri May 10 21:22:23 2013] Assessing source extent using major [Fri May 10 21:22:23 2013] Source does appear to be extended [Fri May 10 21:22:23 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Fri May 10 21:38:05 2013] XMMSAS src. selection expression = ellipse(25238.853943, 27365.163361, 652.500000, 652.500000, 0.000000, X, Y) [Fri May 10 21:38:05 2013] Writing source region out to fullrun_mos2_xmm0018741101_pi300-10000_pass1_cl_src17_src.reg [Fri May 10 21:38:05 2013] Extracting stamp from image fullrun_mos2_xmm0018741101_pi300-10000_cl_sm2.00.img.gz, (253, 278) - (328, 353) [Fri May 10 21:38:05 2013] XMMSAS bgd. selection expression = annulus(25238.853943, 27365.163361, 1087.500000, 2175.000000, X, Y) && !ellipse(26179.731600, 27859.346400, 1160.704033, 1160.704033, 0.000000, X, Y) && !ellipse(25584.645800, 28741.151760, 577.849617, 577.849617, 0.000000, X, Y) && !ellipse(26684.682007, 27801.947540, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25102.844000, 28131.156000, 1228.248035, 1228.248035, 0.000000, X, Y) && !ellipse(24999.166000, 28686.800000, 743.280021, 743.280021, 0.000000, X, Y) && !ellipse(27786.059845, 28034.092682, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24642.465332, 27603.354004, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27355.605255, 26673.331757, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25743.203308, 26756.906769, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24598.471497, 28167.085754, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25284.446106, 26937.231049, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27010.411621, 26318.901276, 870.000000, 870.000000, 0.000000, X, Y) [Fri May 10 21:38:05 2013] Writing fullrun_mos2_xmm0018741101_pi300-10000_pass1_cl_src17.gif [Fri May 10 21:39:31 2013] Mean detx,y = (1472.73, -38.66) [Fri May 10 21:39:32 2013] Setting backscal keywords in source and bgd. spectrum [Fri May 10 21:39:37 2013] Binned source spectrum to 10 counts/bin [Fri May 10 21:39:37 2013] Setting source spectrum file to fullrun_mos2_xmm0018741101_pi300-10000_pass1_cl_src17_src_b10.pi.gz [Fri May 10 21:39:37 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0018741101_pi300-10000_pass1_cl_src17_bgd.pi.gz [Fri May 10 21:44:14 2013] Not generating rmf since there are only 59 counts [Fri May 10 21:44:14 2013] rmf not generated due to insufficient counts [Fri May 10 21:44:38 2013] Updating aperture counts using extracted products [Fri May 10 21:44:38 2013] Total counts from fullrun_mos2_xmm0018741101_pi300-10000_pass1_cl_src17_src_b10.pi.gz = 514.00 [Fri May 10 21:44:38 2013] Total counts from fullrun_mos2_xmm0018741101_pi300-10000_pass1_cl_src17_bgd.pi.gz = 768.00 [Fri May 10 21:44:39 2013] Got source and background scale factors 1307740.000000, 4652936.000000 [Fri May 10 21:44:39 2013] User source parameters: Position = (290.7, 315.1) = 15 40 10.47 -3 18 55.9 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 298.1 +/- 23.7 Background aperture counts = 215.9 Rate = 0.04 +/- 0.003 [Fri May 10 21:44:39 2013] Updating counts from extracted products [Fri May 10 21:44:39 2013] Set source signif. to 298.15/14.69 = 20.29 [Fri May 10 21:44:39 2013] Calculating source flux in energy range 0.30-8.00 [Fri May 10 21:44:39 2013] Using photon index=1.80, rate=0.0391, arf fullrun_mos2_xmm0018741101_pi300-10000_pass1_cl_src17.arf [Fri May 10 21:44:39 2013] Assuming count rate is from the 0.30-10.00 bandpass [Fri May 10 21:44:39 2013] Updating source flux to 4.1e-13 [Fri May 10 21:44:41 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Fri May 10 21:44:42 2013] xmm0018741101/analysis//spectral/fullrun_mos2_xmm0018741101_pi300-10000_pass1_cl_src17_pl.csv not found, spectral fit skipped or did not complete