[Fri May 10 21:21:36 2013] Detection parameters:
  Position = (294.9, 330.0) = 15 40 9.23 -3 17 50.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 212.4 +/- 19.4
  Background counts = 23.1
  Rate = 0.03 +/- 0.003

[Fri May 10 21:21:36 2013] Off-axis axis estimate = 2.30'
[Fri May 10 21:21:52 2013] Using EEF radius (= 7.58 ")to estimate initial spatial extent for simple fitting
[Fri May 10 21:21:52 2013] Initial guess for spatial extent in simple fitting = 7.58"
[Fri May 10 21:21:52 2013] source mask rpix=1.7, npix_max = 20, mask sum = 14, frac = 0.696
[Fri May 10 21:21:52 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 7.58"
[Fri May 10 21:21:53 2013] fullrun_mos2_xmm0018741101_pi300-10000_cl_pass0_src3.ximg exists
[Fri May 10 21:21:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018741101_pi300-10000_cl_pass0_src3.csv
[Fri May 10 21:21:53 2013] fullrun_mos2_xmm0018741101_pi300-10000_cl_pass0_src3_1.ximg exists
[Fri May 10 21:21:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018741101_pi300-10000_cl_pass0_src3.csv
[Fri May 10 21:21:53 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018741101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018741101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 10 21:21:53 2013] fullrun_mos2_xmm0018741101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Fri May 10 21:21:53 2013] fullrun_mos2_xmm0018741101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Fri May 10 21:21:53 2013] Fit fullrun_mos2_xmm0018741101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Fri May 10 21:22:04 2013] Warning, spatial fit 3 centroid is now closest to src. 12
[Fri May 10 21:22:04 2013] Source 1 is offset by -1.197169 and 5.410103 pixels which is larger than
2 X fitted extent = 0.821614 x 0.821614, not incorporating fit results
[Fri May 10 21:22:04 2013] Source 1 is offset by -0.918210 and 5.422066 pixels which is larger than
2 X fitted extent = 0.852860 x 0.852860, not incorporating fit results
[Fri May 10 21:22:04 2013] Vigneting correction estimate = 1.000000
[Fri May 10 21:22:04 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 10 21:22:04 2013] Assessing source extent using major
[Fri May 10 21:22:04 2013] Source does appear to be extended
[Fri May 10 21:22:04 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 10 21:22:04 2013] Source is confused with source 4
[Fri May 10 21:22:04 2013] Source is confused with source 8
[Fri May 10 21:22:13 2013] Using EEF radius (= 7.58 ")to estimate initial spatial extent for simple fitting
[Fri May 10 21:22:13 2013] Initial guess for spatial extent in simple fitting = 7.58"
[Fri May 10 21:22:13 2013] source mask rpix=1.7, npix_max = 20, mask sum = 14, frac = 0.696
[Fri May 10 21:22:13 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 7.58"
[Fri May 10 21:22:13 2013] fullrun_mos2_xmm0018741101_pi300-10000_cl_pass1_src3.ximg exists
[Fri May 10 21:22:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018741101_pi300-10000_cl_pass1_src3.csv
[Fri May 10 21:22:13 2013] fullrun_mos2_xmm0018741101_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri May 10 21:22:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018741101_pi300-10000_cl_pass1_src3.csv
[Fri May 10 21:22:13 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018741101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018741101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 10 21:22:14 2013] fullrun_mos2_xmm0018741101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri May 10 21:22:14 2013] fullrun_mos2_xmm0018741101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri May 10 21:22:14 2013] Fit fullrun_mos2_xmm0018741101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Fri May 10 21:22:23 2013] Spatial fit model total counts = 1059.410000, observed total counts = 1036.000000
[Fri May 10 21:22:23 2013] Offset between fit and detection position for source 1 = 0.925349 pixels
[Fri May 10 21:22:23 2013] 976.669100 total counts/ 915.156000 bgd. counts: snr = 2.033387
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.925349 pixels
  Position = (294.6, 330.9) = 15 40 9.31 -3 17 46.9
  Extent = 7.2 (2.8-13.9)", rotation angle = 0
  Source counts = 61.5 +/- 31.3
  Background counts = 915.2
  Rate = 0.008 +/- 0.004
[Fri May 10 21:22:23 2013] Vigneting correction estimate = 1.000000
[Fri May 10 21:22:23 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 10 21:22:23 2013] Assessing source extent using major axis lower bound
[Fri May 10 21:22:23 2013] Source does appear to be extended
[Fri May 10 21:22:23 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 10 21:38:04 2013] XMMSAS src. selection expression = ellipse(25584.645800, 28741.151760, 433.387212, 433.387212, 0.000000, X, Y)
[Fri May 10 21:38:04 2013] Writing source region out to fullrun_mos2_xmm0018741101_pi300-10000_pass1_cl_src1_src.reg
[Fri May 10 21:38:04 2013] Extracting stamp from image fullrun_mos2_xmm0018741101_pi300-10000_cl_sm2.00.img.gz, (270, 306) - (320, 356)
[Fri May 10 21:38:04 2013] XMMSAS bgd. selection expression = annulus(25584.645800, 28741.151760, 722.312021, 1444.624042, X, Y) && !ellipse(26179.731600, 27859.346400, 1160.704033, 1160.704033, 0.000000, X, Y) && !ellipse(26684.682007, 27801.947540, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25102.844000, 28131.156000, 1228.248035, 1228.248035, 0.000000, X, Y) && !ellipse(24999.166000, 28686.800000, 743.280021, 743.280021, 0.000000, X, Y) && !ellipse(27786.059845, 28034.092682, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24642.465332, 27603.354004, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27355.605255, 26673.331757, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25743.203308, 26756.906769, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24598.471497, 28167.085754, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25238.853943, 27365.163361, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25284.446106, 26937.231049, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May 10 21:38:04 2013] Writing fullrun_mos2_xmm0018741101_pi300-10000_pass1_cl_src1.gif
[Fri May 10 21:38:26 2013] Mean detx,y = (903.08, 1165.10) 
[Fri May 10 21:38:26 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May 10 21:38:31 2013] Binned source spectrum to 10 counts/bin
[Fri May 10 21:38:31 2013] Setting source spectrum file to fullrun_mos2_xmm0018741101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri May 10 21:38:31 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0018741101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri May 10 21:43:15 2013] Not generating rmf since there are only 61 counts
[Fri May 10 21:43:15 2013] rmf not generated due to insufficient counts
[Fri May 10 21:44:38 2013] Updating aperture counts using extracted products
[Fri May 10 21:44:38 2013] Total counts from fullrun_mos2_xmm0018741101_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 335.00
[Fri May 10 21:44:38 2013] Total counts from fullrun_mos2_xmm0018741101_pi300-10000_pass1_cl_src1_bgd.pi.gz = 483.00
[Fri May 10 21:44:38 2013] Got source and background scale factors 546692.000000, 1826696.000000
[Fri May 10 21:44:38 2013] User source parameters:
  Position = (294.6, 330.9) = 15 40 9.31 -3 17 46.9
  Extent = 7.2 (2.8-13.9)", rotation angle = 0
  Source aperture counts = 190.4 +/- 19.3
  Background aperture counts = 144.6
  Rate = 0.03 +/- 0.003

[Fri May 10 21:44:39 2013] Calculating source flux in energy range 0.30-8.00
[Fri May 10 21:44:39 2013] Using photon index=1.80, rate=0.00807, arf fullrun_mos2_xmm0018741101_pi300-10000_pass1_cl_src1.arf
[Fri May 10 21:44:39 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 10 21:44:39 2013] Updating source flux to 9.3e-14
[Fri May 10 21:44:41 2013] Flag b found in src. 1 procflags, skipping spectral fitting
[Fri May 10 21:44:41 2013] Flag c found in src. 1 procflags, skipping spectral fitting
[Fri May 10 21:44:41 2013] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Fri May 10 21:44:42 2013] xmm0018741101/analysis//spectral/fullrun_mos2_xmm0018741101_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete