[Fri May 10 21:21:35 2013] Detection parameters:
  Position = (302.3, 326.1) = 15 40 7.08 -3 18 6.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 230.2 +/- 20.9
  Background counts = 23.5
  Rate = 0.03 +/- 0.003

[Fri May 10 21:21:35 2013] Off-axis axis estimate = 2.02'
[Fri May 10 21:21:51 2013] Using EEF radius (= 7.44 ")to estimate initial spatial extent for simple fitting
[Fri May 10 21:21:51 2013] Initial guess for spatial extent in simple fitting = 7.44"
[Fri May 10 21:21:51 2013] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.023
[Fri May 10 21:21:51 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 7.44"
[Fri May 10 21:21:51 2013] fullrun_mos1_xmm0018741101_pi300-10000_cl_pass0_src3.ximg exists
[Fri May 10 21:21:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018741101_pi300-10000_cl_pass0_src3.csv
[Fri May 10 21:21:51 2013] fullrun_mos1_xmm0018741101_pi300-10000_cl_pass0_src3_1.ximg exists
[Fri May 10 21:21:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018741101_pi300-10000_cl_pass0_src3.csv
[Fri May 10 21:21:51 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0018741101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0018741101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 10 21:21:52 2013] fullrun_mos1_xmm0018741101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Fri May 10 21:21:52 2013] fullrun_mos1_xmm0018741101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Fri May 10 21:21:52 2013] Fit fullrun_mos1_xmm0018741101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Fri May 10 21:22:01 2013] Spatial fit model total counts = 1253.640000, observed total counts = 1252.000000
[Fri May 10 21:22:01 2013] Offset between fit and detection position for source 2 = 2.035173 pixels
[Fri May 10 21:22:01 2013] 1174.092000 total counts/ 947.684000 bgd. counts: snr = 7.354616
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 2.035173 pixels
  Position = (300.5, 326.9) = 15 40 7.62 -3 18 4.2
  Extent = 14.8 (14.6-14.9)", rotation angle = 0
  Source counts = 226.4 +/- 34.3
  Background counts = 947.7
  Rate = 0.03 +/- 0.004
[Fri May 10 21:22:01 2013] Spatial fit model total counts = 1009.120000, observed total counts = 993.000000
[Fri May 10 21:22:01 2013] Offset between fit and detection position for source 2 = 0.174353 pixels
[Fri May 10 21:22:01 2013] Warning, changing simple spatial fit ID from 3 to 8
[Fri May 10 21:22:01 2013] 972.445000 total counts/ 870.531000 bgd. counts: snr = 3.454154
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.174353 pixels
  Position = (300.6, 327.0) = 15 40 7.58 -3 18 3.8
  Extent = 15.2 (15.1-15.2)", rotation angle = 0
  Source counts = 101.9 +/- 31.2
  Background counts = 870.5
  Rate = 0.01 +/- 0.004
[Fri May 10 21:22:01 2013] Vigneting correction estimate = 1.000000
[Fri May 10 21:22:01 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 10 21:22:01 2013] Assessing source extent using major axis lower bound
[Fri May 10 21:22:01 2013] Source does appear to be extended
[Fri May 10 21:22:01 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 10 21:22:01 2013] Source is confused with source 3
[Fri May 10 21:22:12 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 10 21:22:12 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri May 10 21:22:12 2013] Initial guess for spatial extent in simple fitting = 15.19"
[Fri May 10 21:22:12 2013] source mask rpix=3.5, npix_max = 63, mask sum = 64, frac = 1.004
[Fri May 10 21:22:12 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 15.19"
[Fri May 10 21:22:12 2013] fullrun_mos1_xmm0018741101_pi300-10000_cl_pass1_src3.ximg exists
[Fri May 10 21:22:12 2013] fullrun_mos1_xmm0018741101_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri May 10 21:22:12 2013] Fit fullrun_mos1_xmm0018741101_pi300-10000_cl_pass1_src3 appears to have run properly
[Fri May 10 21:22:13 2013] fullrun_mos1_xmm0018741101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri May 10 21:22:13 2013] fullrun_mos1_xmm0018741101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri May 10 21:22:13 2013] Fit fullrun_mos1_xmm0018741101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Fri May 10 21:22:21 2013] Warning, spatial fit 3 centroid is now closest to src. 12
[Fri May 10 21:22:21 2013] Vigneting correction estimate = 1.000000
[Fri May 10 21:22:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 10 21:22:21 2013] Assessing source extent using major axis lower bound
[Fri May 10 21:22:21 2013] Source does appear to be extended
[Fri May 10 21:22:21 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 10 21:22:33 2013] XMMSAS src. selection expression = ellipse(26104.466000, 28403.446000, 911.406026, 911.406026, 0.000000, X, Y)
[Fri May 10 21:22:33 2013] Not overwriting source region fullrun_mos1_xmm0018741101_pi300-10000_pass1_cl_src2_src.reg
[Fri May 10 21:22:33 2013] Extracting stamp from image fullrun_mos1_xmm0018741101_pi300-10000_cl_sm2.00.img.gz, (248, 275) - (353, 379)
[Fri May 10 21:22:33 2013] XMMSAS bgd. selection expression = annulus(26104.466000, 28403.446000, 1519.010044, 3038.020087, X, Y) && !ellipse(25991.318200, 27806.944600, 1159.736033, 1159.736033, 0.000000, X, Y) && !ellipse(25534.077271, 29387.974426, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25259.188000, 28725.266000, 1264.472036, 1264.472036, 0.000000, X, Y) && !ellipse(24885.162000, 27081.176000, 1200.152035, 896.312026, 116.260283, X, Y) && !ellipse(27190.664215, 28660.220276, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26358.883362, 29586.682129, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26986.335815, 26483.606018, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24897.348145, 27532.536407, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25599.083008, 26670.273163, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24145.404022, 29267.436096, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26459.216919, 26847.052979, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28281.644958, 27859.365204, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24299.958588, 28318.220642, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27391.907471, 26760.971619, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24171.515000, 29579.904000, 1281.280037, 422.139212, 99.808990, X, Y)
[Fri May 10 21:22:33 2013] Writing fullrun_mos1_xmm0018741101_pi300-10000_pass1_cl_src2.gif
[Fri May 10 21:22:34 2013] ../../xmm0018741101/products/events/fullrun_mos1_xmm0018741101_pi300-10000_pass1_cl_src2_src.evt and ../../xmm0018741101/products/events/fullrun_mos1_xmm0018741101_pi300-10000_pass1_cl_src2_bgd.evt exist, delete to re-create
[Fri May 10 21:22:34 2013] Mean detx,y = (890.16, -673.61) 
[Fri May 10 21:22:34 2013] ../../xmm0018741101/products/images/fullrun_mos1_xmm0018741101_pi300-10000_pass1_cl_src2_src.img and ../../xmm0018741101/products/images/fullrun_mos1_xmm0018741101_pi300-10000_pass1_cl_src2_bgd.img exist, delete to re-create
[Fri May 10 21:22:34 2013] ../../xmm0018741101/products/spectra/fullrun_mos1_xmm0018741101_pi300-10000_pass1_cl_src2_src.pi and ../../xmm0018741101/products/spectra/fullrun_mos1_xmm0018741101_pi300-10000_pass1_cl_src2_bgd.pi exist, delete to re-create
[Fri May 10 21:22:34 2013] Setting source spectrum file to fullrun_mos1_xmm0018741101_pi300-10000_pass1_cl_src2_src.pi.gz
[Fri May 10 21:22:34 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0018741101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Fri May 10 21:44:36 2013] Updating aperture counts using extracted products
[Fri May 10 21:44:36 2013] Total counts from fullrun_mos1_xmm0018741101_pi300-10000_pass1_cl_src2_src.pi.gz = 1601.00
[Fri May 10 21:44:36 2013] Total counts from fullrun_mos1_xmm0018741101_pi300-10000_pass1_cl_src2_bgd.pi.gz = 1136.00
[Fri May 10 21:44:36 2013] Got source and background scale factors 2592096.000000, 8447956.000000
[Fri May 10 21:44:36 2013] User source parameters:
  Position = (300.6, 327.0) = 15 40 7.58 -3 18 3.8
  Extent = 15.2 (15.1-15.2)", rotation angle = 0
  Source aperture counts = 1252.4 +/- 41.0
  Background aperture counts = 348.6
  Rate = 0.2 +/- 0.005

[Fri May 10 21:44:37 2013] No arf file for this source, not re-computing flux
[Fri May 10 21:44:40 2013] Flag c found in src. 2 procflags, skipping spectral fitting
[Fri May 10 21:44:40 2013] Source 2 has no response, skipping
[Fri May 10 21:44:41 2013] xmm0018741101/analysis//spectral/fullrun_mos1_xmm0018741101_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete