[Sun May 26 00:39:14 2013] Detection parameters:
  Position = (275.9, 329.1) = 15 18 50.69 6 17 53.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 40.8 +/- 9.6
  Background counts = 12.9
  Rate = 0.01 +/- 0.002

[Sun May 26 00:39:15 2013] Off-axis axis estimate = 2.76'
[Sun May 26 00:39:41 2013] Using EEF radius (= 7.81 ")to estimate initial spatial extent for simple fitting
[Sun May 26 00:39:41 2013] Initial guess for spatial extent in simple fitting = 7.81"
[Sun May 26 00:39:41 2013] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.760
[Sun May 26 00:39:41 2013] Giving source the simple spatial ID 25 for pass 0, mean size = 7.81"
[Sun May 26 00:39:42 2013] fullrun_pn_xmm0018741001_pi300-10000_cl_pass0_src25.ximg exists
[Sun May 26 00:39:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018741001_pi300-10000_cl_pass0_src25.csv
[Sun May 26 00:39:42 2013] fullrun_pn_xmm0018741001_pi300-10000_cl_pass0_src25_1.ximg exists
[Sun May 26 00:39:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018741001_pi300-10000_cl_pass0_src25.csv
[Sun May 26 00:39:42 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0018741001_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0018741001_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 26 00:39:43 2013] fullrun_pn_xmm0018741001_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Sun May 26 00:39:43 2013] fullrun_pn_xmm0018741001_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Sun May 26 00:39:43 2013] Fit fullrun_pn_xmm0018741001_pi300-10000_cl_pass0_tfrozen_src25 appears to have run properly
[Sun May 26 00:39:55 2013] Source 25 is offset by 3.564406 and -8.140698 pixels which is larger than
2 X fitted extent = 7.565655 x 7.565655, not incorporating fit results
[Sun May 26 00:39:55 2013] Spatial fit model total counts = 236.180000, observed total counts = 239.000000
[Sun May 26 00:39:55 2013] Offset between fit and detection position for source 25 = 6.700496 pixels
[Sun May 26 00:39:55 2013] 232.271700 total counts/ 142.002000 bgd. counts: snr = 7.575212
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 6.700496 pixels
  Position = (271.9, 334.5) = 15 18 51.86 6 18 19.0
  Extent = 14.8 (13.0-15.6)", rotation angle = 0
  Source counts = 90.3 +/- 15.2
  Background counts = 142.0
  Rate = 0.02 +/- 0.003
[Sun May 26 00:39:55 2013] Vigneting correction estimate = 1.000000
[Sun May 26 00:39:55 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 26 00:39:55 2013] Assessing source extent using major axis lower bound
[Sun May 26 00:39:55 2013] Source does appear to be extended
[Sun May 26 00:39:55 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 26 00:39:55 2013] Source is confused with source 23
[Sun May 26 00:40:12 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May 26 00:40:12 2013] Initial guess for spatial extent in simple fitting = 14.76"
[Sun May 26 00:40:12 2013] source mask rpix=3.4, npix_max = 60, mask sum = 56, frac = 0.924
[Sun May 26 00:40:12 2013] Giving source the simple spatial ID 21 for pass 1, mean size = 14.76"
[Sun May 26 00:40:13 2013] fullrun_pn_xmm0018741001_pi300-10000_cl_pass1_src21.ximg exists
[Sun May 26 00:40:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018741001_pi300-10000_cl_pass1_src21.csv
[Sun May 26 00:40:13 2013] fullrun_pn_xmm0018741001_pi300-10000_cl_pass1_src21_1.ximg exists
[Sun May 26 00:40:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018741001_pi300-10000_cl_pass1_src21.csv
[Sun May 26 00:40:13 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0018741001_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0018741001_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 26 00:40:13 2013] fullrun_pn_xmm0018741001_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Sun May 26 00:40:13 2013] fullrun_pn_xmm0018741001_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Sun May 26 00:40:13 2013] Fit fullrun_pn_xmm0018741001_pi300-10000_cl_pass1_tfrozen_src21 appears to have run properly
[Sun May 26 00:40:25 2013] Spatial fit model total counts = 300.366000, observed total counts = 300.000000
[Sun May 26 00:40:25 2013] Offset between fit and detection position for source 25 = 5.154386 pixels
[Sun May 26 00:40:25 2013] 306.013400 total counts/ 214.349000 bgd. counts: snr = 6.260946
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 5.154386 pixels
  Position = (274.4, 330.0) = 15 18 51.12 6 17 59.4
  Extent = 14.6 (9.0-25.4)", rotation angle = 0
  Source counts = 91.7 +/- 17.5
  Background counts = 214.3
  Rate = 0.02 +/- 0.003
[Sun May 26 00:40:25 2013] Vigneting correction estimate = 1.000000
[Sun May 26 00:40:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 26 00:40:25 2013] Assessing source extent using major axis lower bound
[Sun May 26 00:40:25 2013] Source does appear to be extended
[Sun May 26 00:40:25 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 26 00:40:43 2013] XMMSAS src. selection expression = ellipse(23827.348000, 28658.538000, 875.538025, 875.538025, 0.000000, X, Y)
[Sun May 26 00:40:43 2013] Not overwriting source region fullrun_pn_xmm0018741001_pi300-10000_pass1_cl_src25_src.reg
[Sun May 26 00:40:43 2013] Extracting stamp from image fullrun_pn_xmm0018741001_pi300-10000_cl_sm2.00.img.gz, (224, 280) - (325, 380)
[Sun May 26 00:40:43 2013] XMMSAS bgd. selection expression = annulus(23827.348000, 28658.538000, 1459.230042, 2918.460084, X, Y) && !ellipse(21274.750520, 29485.899000, 456.813613, 456.813613, 0.000000, X, Y) && !ellipse(22466.530800, 32679.002400, 1861.976054, 308.722409, 72.201300, X, Y) && !ellipse(22567.464355, 32249.026031, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22789.570000, 31737.496000, 869.464025, 869.464025, 0.000000, X, Y) && !ellipse(23364.751200, 29725.562000, 1562.192045, 1157.880033, 74.889653, X, Y) && !ellipse(24336.854000, 26833.808000, 1334.392038, 1334.392038, 0.000000, X, Y) && !ellipse(24653.192000, 25821.516000, 1107.472032, 1107.472032, 0.000000, X, Y) && !ellipse(23982.345320, 26379.856500, 422.732012, 422.732012, 0.000000, X, Y) && !ellipse(25238.436000, 24714.764000, 1107.472032, 1107.472032, 0.000000, X, Y)
[Sun May 26 00:40:43 2013] Writing fullrun_pn_xmm0018741001_pi300-10000_pass1_cl_src25.gif
[Sun May 26 00:51:30 2013] Mean detx,y = (58.63, 4678.63) 
[Sun May 26 00:51:36 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May 26 00:52:10 2013] Binned source spectrum to 10 counts/bin
[Sun May 26 00:52:11 2013] Setting source spectrum file to fullrun_pn_xmm0018741001_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Sun May 26 00:52:11 2013] Setting bgd. spectrum file to fullrun_pn_xmm0018741001_pi300-10000_pass1_cl_src25_bgd.pi.gz
[Sun May 26 01:50:42 2013] Not generating rmf since there are only 91 counts
[Sun May 26 01:50:42 2013] rmf not generated due to insufficient counts
[Sun May 26 02:10:05 2013] Updating aperture counts using extracted products
[Sun May 26 02:10:05 2013] Total counts from fullrun_pn_xmm0018741001_pi300-10000_pass1_cl_src25_src_b10.pi.gz = 273.00
[Sun May 26 02:10:06 2013] Total counts from fullrun_pn_xmm0018741001_pi300-10000_pass1_cl_src25_bgd.pi.gz = 654.00
[Sun May 26 02:10:06 2013] Got source and background scale factors 2419200.000000, 11579209.000000
[Sun May 26 02:10:06 2013] User source parameters:
  Position = (274.4, 330.0) = 15 18 51.12 6 17 59.4
  Extent = 14.6 (9.0-25.4)", rotation angle = 0
  Source aperture counts = 136.4 +/- 17.5
  Background aperture counts = 136.6
  Rate = 0.03 +/- 0.004

[Sun May 26 02:10:10 2013] Calculating source flux in energy range 0.30-8.00
[Sun May 26 02:10:10 2013] Using photon index=1.80, rate=0.0183, arf fullrun_pn_xmm0018741001_pi300-10000_pass1_cl_src25.arf
[Sun May 26 02:10:10 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 26 02:10:10 2013] Updating source flux to 5.7e-14
[Sun May 26 02:10:24 2013] Flag b found in src. 25 procflags, skipping spectral fitting
[Sun May 26 02:10:24 2013] Flag c found in src. 25 procflags, skipping spectral fitting
[Sun May 26 02:10:24 2013] Source 25 has fewer than 100.000000 counts, skipping spectral fitting
[Sun May 26 02:10:33 2013] xmm0018741001/analysis//spectral/fullrun_pn_xmm0018741001_pi300-10000_pass1_cl_src25_pl.csv not found, spectral fit skipped or did not complete