[Sun May 26 00:39:14 2013] Detection parameters:
  Position = (255.5, 384.1) = 15 18 56.65 6 21 55.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 29.9 +/- 8.3
  Background counts = 7.3
  Rate = 0.01 +/- 0.003

[Sun May 26 00:39:15 2013] Off-axis axis estimate = 6.95'
[Sun May 26 00:39:41 2013] Using EEF radius (= 9.90 ")to estimate initial spatial extent for simple fitting
[Sun May 26 00:39:41 2013] Initial guess for spatial extent in simple fitting = 9.90"
[Sun May 26 00:39:41 2013] source mask rpix=2.3, npix_max = 30, mask sum = 30, frac = 0.973
[Sun May 26 00:39:41 2013] Giving source the simple spatial ID 15 for pass 0, mean size = 9.90"
[Sun May 26 00:39:42 2013] fullrun_pn_xmm0018741001_pi300-10000_cl_pass0_src15.ximg exists
[Sun May 26 00:39:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018741001_pi300-10000_cl_pass0_src15.csv
[Sun May 26 00:39:42 2013] fullrun_pn_xmm0018741001_pi300-10000_cl_pass0_src15_1.ximg exists
[Sun May 26 00:39:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018741001_pi300-10000_cl_pass0_src15.csv
[Sun May 26 00:39:42 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0018741001_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0018741001_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 26 00:39:43 2013] fullrun_pn_xmm0018741001_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Sun May 26 00:39:43 2013] fullrun_pn_xmm0018741001_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Sun May 26 00:39:43 2013] Fit fullrun_pn_xmm0018741001_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Sun May 26 00:39:55 2013] Spatial fit model total counts = 186.126000, observed total counts = 186.000000
[Sun May 26 00:39:55 2013] Offset between fit and detection position for source 15 = 8.349775 pixels
[Sun May 26 00:39:55 2013] 179.925700 total counts/ 79.046700 bgd. counts: snr = 11.346421
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 8.349775 pixels
  Position = (253.3, 392.2) = 15 18 57.30 6 22 30.1
  Extent = 19.8 (19.8-39.6)", rotation angle = 0
  Source counts = 100.9 +/- 13.4
  Background counts = 79.0
  Rate = 0.02 +/- 0.003
[Sun May 26 00:39:55 2013] Vigneting correction estimate = 1.000000
[Sun May 26 00:39:55 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 26 00:39:55 2013] Assessing source extent using major axis lower bound
[Sun May 26 00:39:55 2013] Source does appear to be extended
[Sun May 26 00:39:55 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 26 00:39:55 2013] Source is confused with source 14
[Sun May 26 00:40:12 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May 26 00:40:12 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun May 26 00:40:12 2013] Initial guess for spatial extent in simple fitting = 19.81"
[Sun May 26 00:40:12 2013] source mask rpix=4.6, npix_max = 102, mask sum = 100, frac = 0.979
[Sun May 26 00:40:12 2013] Giving source the simple spatial ID 13 for pass 1, mean size = 19.81"
[Sun May 26 00:40:13 2013] fullrun_pn_xmm0018741001_pi300-10000_cl_pass1_src13.ximg exists
[Sun May 26 00:40:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018741001_pi300-10000_cl_pass1_src13.csv
[Sun May 26 00:40:13 2013] fullrun_pn_xmm0018741001_pi300-10000_cl_pass1_src13_1.ximg exists
[Sun May 26 00:40:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018741001_pi300-10000_cl_pass1_src13.csv
[Sun May 26 00:40:13 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0018741001_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0018741001_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 26 00:40:13 2013] fullrun_pn_xmm0018741001_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Sun May 26 00:40:13 2013] fullrun_pn_xmm0018741001_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Sun May 26 00:40:13 2013] Fit fullrun_pn_xmm0018741001_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Sun May 26 00:40:25 2013] Spatial fit model total counts = 203.911000, observed total counts = 207.000000
[Sun May 26 00:40:25 2013] Offset between fit and detection position for source 15 = 1.251712 pixels
[Sun May 26 00:40:25 2013] Warning, changing simple spatial fit ID from 13 to 12
[Sun May 26 00:40:25 2013] 199.649400 total counts/ 113.411000 bgd. counts: snr = 8.097913
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 1.251712 pixels
  Position = (253.5, 393.4) = 15 18 57.24 6 22 35.5
  Extent = 20.2" x 6.4", rotation angle = 251
  Source counts = 86.2 +/- 14.1
  Background counts = 113.4
  Rate = 0.02 +/- 0.003
[Sun May 26 00:40:25 2013] Vigneting correction estimate = 1.000000
[Sun May 26 00:40:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 26 00:40:25 2013] Assessing source extent using major
[Sun May 26 00:40:25 2013] Source does appear to be extended
[Sun May 26 00:40:25 2013] Computing asymmetry using major and minor axis, asym = 3.14
[Sun May 26 00:40:25 2013] Source is asymmetric
[Sun May 26 00:40:43 2013] XMMSAS src. selection expression = ellipse(22003.143440, 34179.011600, 1209.522035, 385.205411, 251.068974, X, Y)
[Sun May 26 00:40:43 2013] Not overwriting source region fullrun_pn_xmm0018741001_pi300-10000_pass1_cl_src15_src.reg
[Sun May 26 00:40:43 2013] Extracting stamp from image fullrun_pn_xmm0018741001_pi300-10000_cl_sm2.00.img.gz, (184, 324) - (323, 463)
[Sun May 26 00:40:43 2013] XMMSAS bgd. selection expression = annulus(22003.143440, 34179.011600, 2015.870058, 4031.740116, X, Y) && !ellipse(21370.064800, 36090.569000, 3120.752090, 396.919211, 73.792000, X, Y) && !ellipse(21348.877800, 36258.692000, 1560.376045, 1560.376045, 0.000000, X, Y) && !ellipse(21683.126600, 35250.350000, 907.736026, 907.736026, 0.000000, X, Y) && !ellipse(21734.261200, 34946.246000, 746.524021, 746.524021, 0.000000, X, Y) && !ellipse(22052.414000, 34019.059200, 1625.464047, 481.118414, 247.827000, X, Y) && !ellipse(22466.530800, 32679.002400, 1861.976054, 308.722409, 72.201300, X, Y) && !ellipse(22567.464355, 32249.026031, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22789.570000, 31737.496000, 869.464025, 869.464025, 0.000000, X, Y) && !ellipse(23364.751200, 29725.562000, 1562.192045, 1157.880033, 74.889653, X, Y)
[Sun May 26 00:40:43 2013] Writing fullrun_pn_xmm0018741001_pi300-10000_pass1_cl_src15.gif
[Sun May 26 00:45:10 2013] Mean detx,y = (99.52, 10493.30) 
[Sun May 26 00:45:13 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May 26 00:46:30 2013] Binned source spectrum to 10 counts/bin
[Sun May 26 00:46:31 2013] Setting source spectrum file to fullrun_pn_xmm0018741001_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Sun May 26 00:46:31 2013] Setting bgd. spectrum file to fullrun_pn_xmm0018741001_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Sun May 26 01:45:46 2013] Not generating rmf since there are only 86 counts
[Sun May 26 01:45:46 2013] rmf not generated due to insufficient counts
[Sun May 26 02:10:03 2013] Updating aperture counts using extracted products
[Sun May 26 02:10:03 2013] Total counts from fullrun_pn_xmm0018741001_pi300-10000_pass1_cl_src15_src_b10.pi.gz = 133.00
[Sun May 26 02:10:03 2013] Total counts from fullrun_pn_xmm0018741001_pi300-10000_pass1_cl_src15_bgd.pi.gz = 834.00
[Sun May 26 02:10:04 2013] Got source and background scale factors 1396982.000000, 24668870.000000
[Sun May 26 02:10:04 2013] User source parameters:
  Position = (253.5, 393.4) = 15 18 57.24 6 22 35.5
  Extent = 20.2" x 6.4", rotation angle = 251
  Source aperture counts = 85.8 +/- 12.6
  Background aperture counts = 47.2
  Rate = 0.02 +/- 0.003

[Sun May 26 02:10:09 2013] Calculating source flux in energy range 0.30-8.00
[Sun May 26 02:10:09 2013] Using photon index=1.80, rate=0.0172, arf fullrun_pn_xmm0018741001_pi300-10000_pass1_cl_src15.arf
[Sun May 26 02:10:09 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 26 02:10:09 2013] Updating source flux to 9.5e-14
[Sun May 26 02:10:24 2013] Flag c found in src. 15 procflags, skipping spectral fitting
[Sun May 26 02:10:24 2013] Source 15 has fewer than 100.000000 counts, skipping spectral fitting
[Sun May 26 02:10:33 2013] xmm0018741001/analysis//spectral/fullrun_pn_xmm0018741001_pi300-10000_pass1_cl_src15_pl.csv not found, spectral fit skipped or did not complete