[Sun May 26 00:39:13 2013] Detection parameters:
  Position = (285.7, 258.9) = 15 18 47.84 6 13 1.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 432.4 +/- 26.9
  Background counts = 15.8
  Rate = 0.09 +/- 0.005

[Sun May 26 00:39:15 2013] Off-axis axis estimate = 3.01'
[Sun May 26 00:39:41 2013] Using EEF radius (= 7.94 ")to estimate initial spatial extent for simple fitting
[Sun May 26 00:39:41 2013] Initial guess for spatial extent in simple fitting = 7.94"
[Sun May 26 00:39:41 2013] source mask rpix=1.8, npix_max = 21, mask sum = 19, frac = 0.879
[Sun May 26 00:39:41 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 7.94"
[Sun May 26 00:39:42 2013] fullrun_pn_xmm0018741001_pi300-10000_cl_pass0_src1.ximg exists
[Sun May 26 00:39:42 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0018741001_pi300-10000_cl_pass0_src1.csv
[Sun May 26 00:39:42 2013] fullrun_pn_xmm0018741001_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun May 26 00:39:42 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0018741001_pi300-10000_cl_pass0_src1.csv
[Sun May 26 00:39:42 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0018741001_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0018741001_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 26 00:39:42 2013] fullrun_pn_xmm0018741001_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun May 26 00:39:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018741001_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sun May 26 00:39:42 2013] fullrun_pn_xmm0018741001_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun May 26 00:39:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018741001_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sun May 26 00:39:42 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0018741001_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0018741001_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 26 00:39:55 2013] Source 1 is offset by 7.415777 and 5.608648 pixels which is larger than
2 X fitted extent = 4.936552 x 0.843457, not incorporating fit results
[Sun May 26 00:39:55 2013] Vigneting correction estimate = 1.000000
[Sun May 26 00:39:55 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 26 00:39:55 2013] Assessing source extent using major
[Sun May 26 00:39:55 2013] Source does appear to be extended
[Sun May 26 00:39:55 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 26 00:40:12 2013] Using EEF radius (= 7.94 ")to estimate initial spatial extent for simple fitting
[Sun May 26 00:40:12 2013] Initial guess for spatial extent in simple fitting = 7.94"
[Sun May 26 00:40:12 2013] source mask rpix=1.8, npix_max = 21, mask sum = 19, frac = 0.879
[Sun May 26 00:40:12 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 7.94"
[Sun May 26 00:40:12 2013] fullrun_pn_xmm0018741001_pi300-10000_cl_pass1_src1.ximg exists
[Sun May 26 00:40:12 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0018741001_pi300-10000_cl_pass1_src1.csv
[Sun May 26 00:40:12 2013] fullrun_pn_xmm0018741001_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun May 26 00:40:12 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0018741001_pi300-10000_cl_pass1_src1.csv
[Sun May 26 00:40:12 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0018741001_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0018741001_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 26 00:40:13 2013] fullrun_pn_xmm0018741001_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun May 26 00:40:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018741001_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sun May 26 00:40:13 2013] fullrun_pn_xmm0018741001_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun May 26 00:40:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018741001_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sun May 26 00:40:13 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0018741001_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0018741001_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 26 00:40:25 2013] Source 1 is offset by -4.667557 and 3.973053 pixels which is larger than
2 X fitted extent = 0.666961 x 0.666961, not incorporating fit results
[Sun May 26 00:40:25 2013] Vigneting correction estimate = 1.000000
[Sun May 26 00:40:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 26 00:40:25 2013] Assessing source extent using major
[Sun May 26 00:40:25 2013] Source does appear to be extended
[Sun May 26 00:40:25 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 26 00:40:43 2013] XMMSAS src. selection expression = ellipse(24804.626556, 22472.406342, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May 26 00:40:43 2013] Not overwriting source region fullrun_pn_xmm0018741001_pi300-10000_pass1_cl_src1_src.reg
[Sun May 26 00:40:43 2013] Extracting stamp from image fullrun_pn_xmm0018741001_pi300-10000_cl_sm2.00.img.gz, (248, 221) - (323, 296)
[Sun May 26 00:40:43 2013] XMMSAS bgd. selection expression = annulus(24804.626556, 22472.406342, 1087.500000, 2175.000000, X, Y) && !ellipse(25417.070800, 23791.650200, 1394.340040, 1394.340040, 0.000000, X, Y) && !ellipse(25238.436000, 24714.764000, 1107.472032, 1107.472032, 0.000000, X, Y)
[Sun May 26 00:40:43 2013] Writing fullrun_pn_xmm0018741001_pi300-10000_pass1_cl_src1.gif
[Sun May 26 00:40:43 2013] ../../xmm0018741001/products/events/fullrun_pn_xmm0018741001_pi300-10000_pass1_cl_src1_src.evt and ../../xmm0018741001/products/events/fullrun_pn_xmm0018741001_pi300-10000_pass1_cl_src1_bgd.evt exist, delete to re-create
[Sun May 26 00:40:44 2013] Mean detx,y = (1038.55, -1369.77) 
[Sun May 26 00:40:44 2013] ../../xmm0018741001/products/images/fullrun_pn_xmm0018741001_pi300-10000_pass1_cl_src1_src.img and ../../xmm0018741001/products/images/fullrun_pn_xmm0018741001_pi300-10000_pass1_cl_src1_bgd.img exist, delete to re-create
[Sun May 26 00:40:44 2013] ../../xmm0018741001/products/spectra/fullrun_pn_xmm0018741001_pi300-10000_pass1_cl_src1_src_b10.pi.gz and ../../xmm0018741001/products/spectra/fullrun_pn_xmm0018741001_pi300-10000_pass1_cl_src1_bgd.pi exist, delete to re-create
[Sun May 26 00:40:44 2013] Setting source spectrum file to fullrun_pn_xmm0018741001_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun May 26 00:40:44 2013] Setting bgd. spectrum file to fullrun_pn_xmm0018741001_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun May 26 00:40:44 2013] ../../xmm0018741001/products/lightcurves/fullrun_pn_xmm0018741001_pi300-10000_pass1_cl_src1_src.lc and ../../xmm0018741001/products/lightcurves/fullrun_pn_xmm0018741001_pi300-10000_pass1_cl_src1_bgd.lc exist, delete to re-create
[Sun May 26 00:57:31 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun May 26 00:57:31 2013] rmf not generated due to insufficient counts
[Sun May 26 02:10:00 2013] Updating aperture counts using extracted products
[Sun May 26 02:10:00 2013] Total counts from fullrun_pn_xmm0018741001_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 527.00
[Sun May 26 02:10:00 2013] Total counts from fullrun_pn_xmm0018741001_pi300-10000_pass1_cl_src1_bgd.pi.gz = 850.00
[Sun May 26 02:10:00 2013] Got source and background scale factors 920424.000000, 7183161.000000
[Sun May 26 02:10:00 2013] User source parameters:
  Position = (285.7, 258.9) = 15 18 47.84 6 13 1.6
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 418.1 +/- 24.0
  Background aperture counts = 108.9
  Rate = 0.08 +/- 0.005

[Sun May 26 02:10:00 2013] Updating counts from extracted products
[Sun May 26 02:10:00 2013] Set source signif. to 418.08/10.44 = 40.06
[Sun May 26 02:10:09 2013] Calculating source flux in energy range 0.30-8.00
[Sun May 26 02:10:09 2013] Using photon index=1.80, rate=0.0836, arf fullrun_pn_xmm0018741001_pi300-10000_pass1_cl_src1.arf
[Sun May 26 02:10:09 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 26 02:10:09 2013] Updating source flux to 2.5e-13
[Sun May 26 02:10:24 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun May 26 02:10:33 2013] xmm0018741001/analysis//spectral/fullrun_pn_xmm0018741001_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete