[Sun May 26 00:39:17 2013] Detection parameters:
  Position = (221.0, 208.2) = 15 19 6.70 6 9 9.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 46.0 +/- 8.6
  Background counts = 2.6
  Rate = 0.01 +/- 0.002

[Sun May 26 00:39:17 2013] Off-axis axis estimate = 8.62'
[Sun May 26 00:39:44 2013] Using EEF radius (= 10.74 ")to estimate initial spatial extent for simple fitting
[Sun May 26 00:39:44 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun May 26 00:39:44 2013] Initial guess for spatial extent in simple fitting = 10.74"
[Sun May 26 00:39:44 2013] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.021
[Sun May 26 00:39:44 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 10.74"
[Sun May 26 00:39:45 2013] fullrun_mos2_xmm0018741001_pi300-10000_cl_pass0_src4.ximg exists
[Sun May 26 00:39:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018741001_pi300-10000_cl_pass0_src4.csv
[Sun May 26 00:39:45 2013] fullrun_mos2_xmm0018741001_pi300-10000_cl_pass0_src4_1.ximg exists
[Sun May 26 00:39:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018741001_pi300-10000_cl_pass0_src4.csv
[Sun May 26 00:39:45 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018741001_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018741001_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 26 00:39:45 2013] fullrun_mos2_xmm0018741001_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Sun May 26 00:39:45 2013] fullrun_mos2_xmm0018741001_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Sun May 26 00:39:45 2013] Fit fullrun_mos2_xmm0018741001_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Sun May 26 00:40:01 2013] Spatial fit model total counts = 63.594000, observed total counts = 63.000000
[Sun May 26 00:40:01 2013] Offset between fit and detection position for source 8 = 0.336381 pixels
[Sun May 26 00:40:01 2013] 65.600100 total counts/ 35.021800 bgd. counts: snr = 5.167067
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.336381 pixels
  Position = (221.3, 208.3) = 15 19 6.60 6 9 10.0
  Extent = 4.8 (3.7-5.9)", rotation angle = 0
  Source counts = 30.6 +/- 8.1
  Background counts = 35.0
  Rate = 0.004 +/- 0.001
[Sun May 26 00:40:01 2013] Vigneting correction estimate = 1.000000
[Sun May 26 00:40:01 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 26 00:40:01 2013] Assessing source extent using major axis lower bound
[Sun May 26 00:40:01 2013] Source does appear to be extended
[Sun May 26 00:40:01 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 26 00:40:14 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May 26 00:40:14 2013] Initial guess for spatial extent in simple fitting = 4.77"
[Sun May 26 00:40:14 2013] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.882
[Sun May 26 00:40:14 2013] Giving source the simple spatial ID 4 for pass 1, mean size = 4.77"
[Sun May 26 00:40:15 2013] fullrun_mos2_xmm0018741001_pi300-10000_cl_pass1_src4.ximg exists
[Sun May 26 00:40:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018741001_pi300-10000_cl_pass1_src4.csv
[Sun May 26 00:40:15 2013] fullrun_mos2_xmm0018741001_pi300-10000_cl_pass1_src4_1.ximg exists
[Sun May 26 00:40:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018741001_pi300-10000_cl_pass1_src4.csv
[Sun May 26 00:40:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018741001_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018741001_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 26 00:40:15 2013] fullrun_mos2_xmm0018741001_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Sun May 26 00:40:15 2013] fullrun_mos2_xmm0018741001_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Sun May 26 00:40:15 2013] Fit fullrun_mos2_xmm0018741001_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Sun May 26 00:40:32 2013] Spatial fit model total counts = 62.986200, observed total counts = 63.000000
[Sun May 26 00:40:32 2013] Offset between fit and detection position for source 8 = 0.053080 pixels
[Sun May 26 00:40:32 2013] 64.947700 total counts/ 34.482400 bgd. counts: snr = 5.188081
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.053080 pixels
  Position = (221.3, 208.3) = 15 19 6.61 6 9 10.3
  Extent = 4.9 (3.7-6.4)", rotation angle = 0
  Source counts = 30.5 +/- 8.1
  Background counts = 34.5
  Rate = 0.004 +/- 0.001
[Sun May 26 00:40:32 2013] Vigneting correction estimate = 1.000000
[Sun May 26 00:40:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 26 00:40:32 2013] Assessing source extent using major axis lower bound
[Sun May 26 00:40:32 2013] Source does appear to be extended
[Sun May 26 00:40:32 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 26 02:09:42 2013] XMMSAS src. selection expression = ellipse(19208.481200, 18075.112000, 295.400304, 295.400304, 0.000000, X, Y)
[Sun May 26 02:09:42 2013] Not overwriting source region fullrun_mos2_xmm0018741001_pi300-10000_pass1_cl_src8_src.reg
[Sun May 26 02:09:42 2013] Extracting stamp from image fullrun_mos2_xmm0018741001_pi300-10000_cl_sm2.00.img.gz, (204, 191) - (238, 225)
[Sun May 26 02:09:42 2013] XMMSAS bgd. selection expression = annulus(19208.481200, 18075.112000, 492.333840, 984.667681, X, Y)
[Sun May 26 02:09:42 2013] Writing fullrun_mos2_xmm0018741001_pi300-10000_pass1_cl_src8.gif
[Sun May 26 02:09:42 2013] ../../xmm0018741001/products/events/fullrun_mos2_xmm0018741001_pi300-10000_pass1_cl_src8_src.evt and ../../xmm0018741001/products/events/fullrun_mos2_xmm0018741001_pi300-10000_pass1_cl_src8_bgd.evt exist, delete to re-create
[Sun May 26 02:09:42 2013] Mean detx,y = (-7588.11, 3792.56) 
[Sun May 26 02:09:42 2013] ../../xmm0018741001/products/images/fullrun_mos2_xmm0018741001_pi300-10000_pass1_cl_src8_src.img and ../../xmm0018741001/products/images/fullrun_mos2_xmm0018741001_pi300-10000_pass1_cl_src8_bgd.img exist, delete to re-create
[Sun May 26 02:09:42 2013] ../../xmm0018741001/products/spectra/fullrun_mos2_xmm0018741001_pi300-10000_pass1_cl_src8_src_b10.pi.gz and ../../xmm0018741001/products/spectra/fullrun_mos2_xmm0018741001_pi300-10000_pass1_cl_src8_bgd.pi exist, delete to re-create
[Sun May 26 02:09:42 2013] Setting source spectrum file to fullrun_mos2_xmm0018741001_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Sun May 26 02:09:42 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0018741001_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Sun May 26 02:09:42 2013] ../../xmm0018741001/products/lightcurves/fullrun_mos2_xmm0018741001_pi300-10000_pass1_cl_src8_src.lc and ../../xmm0018741001/products/lightcurves/fullrun_mos2_xmm0018741001_pi300-10000_pass1_cl_src8_bgd.lc exist, delete to re-create
[Sun May 26 02:09:47 2013] Not generating rmf since there are only 30 counts
[Sun May 26 02:09:47 2013] rmf not generated due to insufficient counts
[Sun May 26 02:09:47 2013] fullrun_mos2_xmm0018741001_pi300-10000_pass1_cl_src8.arf exists, delete to re-create
[Sun May 26 02:10:13 2013] Updating aperture counts using extracted products
[Sun May 26 02:10:13 2013] Total counts from fullrun_mos2_xmm0018741001_pi300-10000_pass1_cl_src8_src_b10.pi.gz = 36.00
[Sun May 26 02:10:13 2013] Total counts from fullrun_mos2_xmm0018741001_pi300-10000_pass1_cl_src8_bgd.pi.gz = 45.00
[Sun May 26 02:10:13 2013] Got source and background scale factors 275200.000000, 2258530.000000
[Sun May 26 02:10:13 2013] User source parameters:
  Position = (221.3, 208.3) = 15 19 6.61 6 9 10.3
  Extent = 4.9 (3.7-6.4)", rotation angle = 0
  Source aperture counts = 30.5 +/- 7.1
  Background aperture counts = 5.5
  Rate = 0.004 +/- 0.0009

[Sun May 26 02:10:16 2013] Calculating source flux in energy range 0.30-8.00
[Sun May 26 02:10:16 2013] Using photon index=1.80, rate=0.00409, arf fullrun_mos2_xmm0018741001_pi300-10000_pass1_cl_src8.arf
[Sun May 26 02:10:16 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 26 02:10:16 2013] Updating source flux to 8.2e-14
[Sun May 26 02:10:23 2013] Source 8 has fewer than 100.000000 counts, skipping spectral fitting
[Sun May 26 02:10:24 2013] xmm0018741001/analysis//spectral/fullrun_mos2_xmm0018741001_pi300-10000_pass1_cl_src8_pl.csv not found, spectral fit skipped or did not complete