[Sun May 26 00:39:17 2013] Detection parameters:
  Position = (292.7, 274.0) = 15 18 45.80 6 13 56.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 8876.9 +/- 111.5
  Background counts = 10.0
  Rate = 1 +/- 0.02

[Sun May 26 00:39:17 2013] Off-axis axis estimate = 1.82'
[Sun May 26 00:39:44 2013] Using EEF radius (= 7.34 ")to estimate initial spatial extent for simple fitting
[Sun May 26 00:39:44 2013] Initial guess for spatial extent in simple fitting = 7.34"
[Sun May 26 00:39:44 2013] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.046
[Sun May 26 00:39:44 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 7.34"
[Sun May 26 00:39:45 2013] fullrun_mos2_xmm0018741001_pi300-10000_cl_pass0_src1.ximg exists
[Sun May 26 00:39:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018741001_pi300-10000_cl_pass0_src1.csv
[Sun May 26 00:39:45 2013] fullrun_mos2_xmm0018741001_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun May 26 00:39:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018741001_pi300-10000_cl_pass0_src1.csv
[Sun May 26 00:39:45 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018741001_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018741001_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 26 00:39:45 2013] fullrun_mos2_xmm0018741001_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun May 26 00:39:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018741001_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sun May 26 00:39:45 2013] fullrun_mos2_xmm0018741001_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun May 26 00:39:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018741001_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sun May 26 00:39:45 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018741001_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018741001_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 26 00:40:01 2013] Source 2 is offset by -6.088909 and -7.713756 pixels which is larger than
2 X fitted extent = 0.843407 x 0.843407, not incorporating fit results
[Sun May 26 00:40:01 2013] Vigneting correction estimate = 1.000000
[Sun May 26 00:40:01 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 26 00:40:01 2013] Assessing source extent using major
[Sun May 26 00:40:01 2013] Source does appear to be extended
[Sun May 26 00:40:01 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 26 00:40:14 2013] Using EEF radius (= 7.34 ")to estimate initial spatial extent for simple fitting
[Sun May 26 00:40:14 2013] Initial guess for spatial extent in simple fitting = 7.34"
[Sun May 26 00:40:14 2013] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.046
[Sun May 26 00:40:14 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 7.34"
[Sun May 26 00:40:15 2013] fullrun_mos2_xmm0018741001_pi300-10000_cl_pass1_src1.ximg exists
[Sun May 26 00:40:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018741001_pi300-10000_cl_pass1_src1.csv
[Sun May 26 00:40:15 2013] fullrun_mos2_xmm0018741001_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun May 26 00:40:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018741001_pi300-10000_cl_pass1_src1.csv
[Sun May 26 00:40:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018741001_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018741001_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 26 00:40:15 2013] fullrun_mos2_xmm0018741001_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun May 26 00:40:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018741001_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sun May 26 00:40:15 2013] fullrun_mos2_xmm0018741001_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun May 26 00:40:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018741001_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sun May 26 00:40:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018741001_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018741001_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 26 00:40:32 2013] Source 2 is offset by -6.088909 and -7.713756 pixels which is larger than
2 X fitted extent = 0.843407 x 0.843407, not incorporating fit results
[Sun May 26 00:40:32 2013] Vigneting correction estimate = 1.000000
[Sun May 26 00:40:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 26 00:40:32 2013] Assessing source extent using major
[Sun May 26 00:40:32 2013] Source does appear to be extended
[Sun May 26 00:40:32 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 26 02:09:42 2013] Counts = 8876.937500, rescaling region sizes by 2.000000
[Sun May 26 02:09:42 2013] XMMSAS src. selection expression = ellipse(25412.776947, 23792.415222, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sun May 26 02:09:42 2013] Not overwriting source region fullrun_mos2_xmm0018741001_pi300-10000_pass1_cl_src2_src.reg
[Sun May 26 02:09:42 2013] Extracting stamp from image fullrun_mos2_xmm0018741001_pi300-10000_cl_sm2.00.img.gz, (218, 199) - (368, 349)
[Sun May 26 02:09:42 2013] XMMSAS bgd. selection expression = annulus(25412.776947, 23792.415222, 4350.000000, 8700.000000, X, Y) && !ellipse(24812.549164, 22658.526550, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21286.564056, 29396.090851, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19208.481200, 18075.112000, 393.867072, 393.867072, 0.000000, X, Y) && !ellipse(16779.797200, 31912.003000, 672.759219, 672.759219, 0.000000, X, Y) && !ellipse(34560.405080, 17702.938800, 529.142415, 529.142415, 0.000000, X, Y) && !ellipse(30293.038000, 24026.682000, 501.094414, 501.094414, 0.000000, X, Y) && !ellipse(17189.792786, 16427.979919, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 26 02:09:42 2013] Writing fullrun_mos2_xmm0018741001_pi300-10000_pass1_cl_src2.gif
[Sun May 26 02:09:42 2013] ../../xmm0018741001/products/events/fullrun_mos2_xmm0018741001_pi300-10000_pass1_cl_src2_src.evt and ../../xmm0018741001/products/events/fullrun_mos2_xmm0018741001_pi300-10000_pass1_cl_src2_bgd.evt exist, delete to re-create
[Sun May 26 02:09:42 2013] Mean detx,y = (65.26, 241.62) 
[Sun May 26 02:09:42 2013] ../../xmm0018741001/products/images/fullrun_mos2_xmm0018741001_pi300-10000_pass1_cl_src2_src.img and ../../xmm0018741001/products/images/fullrun_mos2_xmm0018741001_pi300-10000_pass1_cl_src2_bgd.img exist, delete to re-create
[Sun May 26 02:09:42 2013] ../../xmm0018741001/products/spectra/fullrun_mos2_xmm0018741001_pi300-10000_pass1_cl_src2_src_b10.pi.gz and ../../xmm0018741001/products/spectra/fullrun_mos2_xmm0018741001_pi300-10000_pass1_cl_src2_bgd.pi exist, delete to re-create
[Sun May 26 02:09:42 2013] Setting source spectrum file to fullrun_mos2_xmm0018741001_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun May 26 02:09:42 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0018741001_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sun May 26 02:09:42 2013] ../../xmm0018741001/products/lightcurves/fullrun_mos2_xmm0018741001_pi300-10000_pass1_cl_src2_src.lc and ../../xmm0018741001/products/lightcurves/fullrun_mos2_xmm0018741001_pi300-10000_pass1_cl_src2_bgd.lc exist, delete to re-create
[Sun May 26 02:09:47 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun May 26 02:09:47 2013] rmf not generated due to insufficient counts
[Sun May 26 02:09:47 2013] fullrun_mos2_xmm0018741001_pi300-10000_pass1_cl_src2.arf exists, delete to re-create
[Sun May 26 02:10:12 2013] Updating aperture counts using extracted products
[Sun May 26 02:10:12 2013] Total counts from fullrun_mos2_xmm0018741001_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 8871.00
[Sun May 26 02:10:12 2013] Total counts from fullrun_mos2_xmm0018741001_pi300-10000_pass1_cl_src2_bgd.pi.gz = 2780.00
[Sun May 26 02:10:12 2013] Got source and background scale factors 4992684.000000, 161295924.000000
[Sun May 26 02:10:12 2013] User source parameters:
  Position = (292.7, 274.0) = 15 18 45.80 6 13 56.3
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 8784.9 +/- 95.2
  Background aperture counts = 86.1
  Rate = 1 +/- 0.01

[Sun May 26 02:10:12 2013] Updating counts from extracted products
[Sun May 26 02:10:12 2013] Set source signif. to 8784.95/9.28 = 947.03
[Sun May 26 02:10:16 2013] Calculating source flux in energy range 0.30-8.00
[Sun May 26 02:10:16 2013] Using photon index=1.80, rate=1.18, arf fullrun_mos2_xmm0018741001_pi300-10000_pass1_cl_src2.arf
[Sun May 26 02:10:16 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 26 02:10:16 2013] Updating source flux to 1.1e-11
[Sun May 26 02:10:23 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun May 26 02:10:24 2013] xmm0018741001/analysis//spectral/fullrun_mos2_xmm0018741001_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete