[Sun May 26 00:39:17 2013] Detection parameters:
  Position = (293.4, 87.7) = 15 18 45.58 6 0 25.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 44.3 +/- 8.2
  Background counts = 1.5
  Rate = 0.006 +/- 0.001

[Sun May 26 00:39:17 2013] Off-axis axis estimate = 15.28'
[Sun May 26 00:39:44 2013] Using EEF radius (= 14.07 ")to estimate initial spatial extent for simple fitting
[Sun May 26 00:39:44 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun May 26 00:39:44 2013] Initial guess for spatial extent in simple fitting = 14.07"
[Sun May 26 00:39:44 2013] source mask rpix=3.2, npix_max = 55, mask sum = 46, frac = 0.825
[Sun May 26 00:39:44 2013] Giving source the simple spatial ID 8 for pass 0, mean size = 14.07"
[Sun May 26 00:39:45 2013] fullrun_mos2_xmm0018741001_pi300-10000_cl_pass0_src8.ximg exists
[Sun May 26 00:39:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018741001_pi300-10000_cl_pass0_src8.csv
[Sun May 26 00:39:45 2013] fullrun_mos2_xmm0018741001_pi300-10000_cl_pass0_src8_1.ximg exists
[Sun May 26 00:39:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018741001_pi300-10000_cl_pass0_src8.csv
[Sun May 26 00:39:45 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018741001_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018741001_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 26 00:39:45 2013] fullrun_mos2_xmm0018741001_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Sun May 26 00:39:45 2013] fullrun_mos2_xmm0018741001_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Sun May 26 00:39:45 2013] Fit fullrun_mos2_xmm0018741001_pi300-10000_cl_pass0_tfrozen_src8 appears to have run properly
[Sun May 26 00:40:01 2013] Spatial fit model total counts = 67.067000, observed total counts = 62.000000
[Sun May 26 00:40:01 2013] Offset between fit and detection position for source 15 = 0.244387 pixels
[Sun May 26 00:40:01 2013] 68.251600 total counts/ 34.802300 bgd. counts: snr = 5.670000
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 0.244387 pixels
  Position = (293.2, 87.8) = 15 18 45.65 6 0 26.1
  Extent = 6.9 (4.3-10.8)", rotation angle = 0
  Source counts = 33.4 +/- 8.3
  Background counts = 34.8
  Rate = 0.004 +/- 0.001
[Sun May 26 00:40:01 2013] Vigneting correction estimate = 1.000000
[Sun May 26 00:40:01 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 26 00:40:01 2013] Assessing source extent using major axis lower bound
[Sun May 26 00:40:01 2013] Source does appear to be extended
[Sun May 26 00:40:01 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 26 00:40:14 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May 26 00:40:14 2013] Initial guess for spatial extent in simple fitting = 6.88"
[Sun May 26 00:40:14 2013] source mask rpix=1.6, npix_max = 17, mask sum = 15, frac = 0.866
[Sun May 26 00:40:14 2013] Giving source the simple spatial ID 8 for pass 1, mean size = 6.88"
[Sun May 26 00:40:15 2013] fullrun_mos2_xmm0018741001_pi300-10000_cl_pass1_src8.ximg exists
[Sun May 26 00:40:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018741001_pi300-10000_cl_pass1_src8.csv
[Sun May 26 00:40:15 2013] fullrun_mos2_xmm0018741001_pi300-10000_cl_pass1_src8_1.ximg exists
[Sun May 26 00:40:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018741001_pi300-10000_cl_pass1_src8.csv
[Sun May 26 00:40:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018741001_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018741001_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 26 00:40:15 2013] fullrun_mos2_xmm0018741001_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Sun May 26 00:40:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018741001_pi300-10000_cl_pass1_tfrozen_src8.csv
[Sun May 26 00:40:15 2013] fullrun_mos2_xmm0018741001_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Sun May 26 00:40:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018741001_pi300-10000_cl_pass1_tfrozen_src8.csv
[Sun May 26 00:40:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018741001_pi300-10000_cl_pass1_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018741001_pi300-10000_cl_pass1_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 26 00:40:32 2013] Warning, spatial fit 8 centroid is now closest to src. 11
[Sun May 26 00:40:32 2013] Vigneting correction estimate = 1.000000
[Sun May 26 00:40:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 26 00:40:32 2013] Assessing source extent using major axis lower bound
[Sun May 26 00:40:32 2013] Source does appear to be extended
[Sun May 26 00:40:32 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 26 02:09:42 2013] XMMSAS src. selection expression = ellipse(25458.762080, 7591.569000, 412.716612, 412.716612, 0.000000, X, Y)
[Sun May 26 02:09:42 2013] Not overwriting source region fullrun_mos2_xmm0018741001_pi300-10000_pass1_cl_src15_src.reg
[Sun May 26 02:09:42 2013] Extracting stamp from image fullrun_mos2_xmm0018741001_pi300-10000_cl_sm2.00.img.gz, (269, 64) - (317, 112)
[Sun May 26 02:09:42 2013] XMMSAS bgd. selection expression = annulus(25458.762080, 7591.569000, 687.861020, 1375.722040, X, Y)
[Sun May 26 02:09:42 2013] Writing fullrun_mos2_xmm0018741001_pi300-10000_pass1_cl_src15.gif
[Sun May 26 02:09:43 2013] ../../xmm0018741001/products/events/fullrun_mos2_xmm0018741001_pi300-10000_pass1_cl_src15_src.evt and ../../xmm0018741001/products/events/fullrun_mos2_xmm0018741001_pi300-10000_pass1_cl_src15_bgd.evt exist, delete to re-create
[Sun May 26 02:09:43 2013] Mean detx,y = (-4814.92, 15698.22) 
[Sun May 26 02:09:43 2013] ../../xmm0018741001/products/images/fullrun_mos2_xmm0018741001_pi300-10000_pass1_cl_src15_src.img and ../../xmm0018741001/products/images/fullrun_mos2_xmm0018741001_pi300-10000_pass1_cl_src15_bgd.img exist, delete to re-create
[Sun May 26 02:09:43 2013] ../../xmm0018741001/products/spectra/fullrun_mos2_xmm0018741001_pi300-10000_pass1_cl_src15_src_b10.pi.gz and ../../xmm0018741001/products/spectra/fullrun_mos2_xmm0018741001_pi300-10000_pass1_cl_src15_bgd.pi exist, delete to re-create
[Sun May 26 02:09:43 2013] Setting source spectrum file to fullrun_mos2_xmm0018741001_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Sun May 26 02:09:43 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0018741001_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Sun May 26 02:09:43 2013] ../../xmm0018741001/products/lightcurves/fullrun_mos2_xmm0018741001_pi300-10000_pass1_cl_src15_src.lc and ../../xmm0018741001/products/lightcurves/fullrun_mos2_xmm0018741001_pi300-10000_pass1_cl_src15_bgd.lc exist, delete to re-create
[Sun May 26 02:09:47 2013] Not generating rmf since there are only 33 counts
[Sun May 26 02:09:47 2013] rmf not generated due to insufficient counts
[Sun May 26 02:09:47 2013] fullrun_mos2_xmm0018741001_pi300-10000_pass1_cl_src15.arf exists, delete to re-create
[Sun May 26 02:10:14 2013] Updating aperture counts using extracted products
[Sun May 26 02:10:14 2013] Total counts from fullrun_mos2_xmm0018741001_pi300-10000_pass1_cl_src15_src_b10.pi.gz = 36.00
[Sun May 26 02:10:14 2013] Total counts from fullrun_mos2_xmm0018741001_pi300-10000_pass1_cl_src15_bgd.pi.gz = 23.00
[Sun May 26 02:10:14 2013] Got source and background scale factors 480380.000000, 2604665.000000
[Sun May 26 02:10:14 2013] User source parameters:
  Position = (293.2, 87.8) = 15 18 45.65 6 0 26.1
  Extent = 6.9 (4.3-10.8)", rotation angle = 0
  Source aperture counts = 31.8 +/- 7.1
  Background aperture counts = 4.2
  Rate = 0.004 +/- 0.0009

[Sun May 26 02:10:16 2013] Calculating source flux in energy range 0.30-8.00
[Sun May 26 02:10:16 2013] Using photon index=1.80, rate=0.0045, arf fullrun_mos2_xmm0018741001_pi300-10000_pass1_cl_src15.arf
[Sun May 26 02:10:16 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 26 02:10:16 2013] Updating source flux to 1.8e-13
[Sun May 26 02:10:23 2013] Source 15 has fewer than 100.000000 counts, skipping spectral fitting
[Sun May 26 02:10:24 2013] xmm0018741001/analysis//spectral/fullrun_mos2_xmm0018741001_pi300-10000_pass1_cl_src15_pl.csv not found, spectral fit skipped or did not complete