[Sun May 26 00:39:17 2013] Detection parameters:
  Position = (377.3, 108.3) = 15 18 21.11 6 1 55.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 43.6 +/- 8.2
  Background counts = 1.9
  Rate = 0.006 +/- 0.001

[Sun May 26 00:39:17 2013] Off-axis axis estimate = 14.92'
[Sun May 26 00:39:44 2013] Using EEF radius (= 13.89 ")to estimate initial spatial extent for simple fitting
[Sun May 26 00:39:44 2013] Initial guess for spatial extent in simple fitting = 13.89"
[Sun May 26 00:39:44 2013] source mask rpix=3.2, npix_max = 54, mask sum = 49, frac = 0.898
[Sun May 26 00:39:44 2013] Giving source the simple spatial ID 9 for pass 0, mean size = 13.89"
[Sun May 26 00:39:45 2013] fullrun_mos2_xmm0018741001_pi300-10000_cl_pass0_src9.ximg exists
[Sun May 26 00:39:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018741001_pi300-10000_cl_pass0_src9.csv
[Sun May 26 00:39:45 2013] fullrun_mos2_xmm0018741001_pi300-10000_cl_pass0_src9_1.ximg exists
[Sun May 26 00:39:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018741001_pi300-10000_cl_pass0_src9.csv
[Sun May 26 00:39:45 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018741001_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018741001_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 26 00:39:45 2013] fullrun_mos2_xmm0018741001_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Sun May 26 00:39:45 2013] fullrun_mos2_xmm0018741001_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Sun May 26 00:39:45 2013] Fit fullrun_mos2_xmm0018741001_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Sun May 26 00:40:01 2013] Spatial fit model total counts = 57.421000, observed total counts = 54.000000
[Sun May 26 00:40:01 2013] Offset between fit and detection position for source 14 = 0.184683 pixels
[Sun May 26 00:40:01 2013] 57.295360 total counts/ 9.664760 bgd. counts: snr = 15.321120
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.184683 pixels
  Position = (377.1, 108.3) = 15 18 21.17 6 1 55.3
  Extent = 10.4 (7.3-13.9)", rotation angle = 0
  Source counts = 47.6 +/- 7.6
  Background counts = 9.7
  Rate = 0.006 +/- 0.001
[Sun May 26 00:40:01 2013] Vigneting correction estimate = 1.000000
[Sun May 26 00:40:01 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 26 00:40:01 2013] Assessing source extent using major axis lower bound
[Sun May 26 00:40:01 2013] Source does appear to be extended
[Sun May 26 00:40:01 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 26 00:40:14 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May 26 00:40:14 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun May 26 00:40:14 2013] Initial guess for spatial extent in simple fitting = 10.41"
[Sun May 26 00:40:14 2013] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.075
[Sun May 26 00:40:14 2013] Giving source the simple spatial ID 9 for pass 1, mean size = 10.41"
[Sun May 26 00:40:15 2013] fullrun_mos2_xmm0018741001_pi300-10000_cl_pass1_src9.ximg exists
[Sun May 26 00:40:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018741001_pi300-10000_cl_pass1_src9.csv
[Sun May 26 00:40:15 2013] fullrun_mos2_xmm0018741001_pi300-10000_cl_pass1_src9_1.ximg exists
[Sun May 26 00:40:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018741001_pi300-10000_cl_pass1_src9.csv
[Sun May 26 00:40:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018741001_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018741001_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 26 00:40:15 2013] fullrun_mos2_xmm0018741001_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Sun May 26 00:40:15 2013] fullrun_mos2_xmm0018741001_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Sun May 26 00:40:15 2013] Fit fullrun_mos2_xmm0018741001_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Sun May 26 00:40:32 2013] Spatial fit model total counts = 52.827800, observed total counts = 52.000000
[Sun May 26 00:40:32 2013] Offset between fit and detection position for source 14 = 0.590703 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.590703 pixels
  Position = (377.3, 108.9) = 15 18 21.12 6 1 57.8
  Extent = 11.1 (7.8-12.8)", rotation angle = 0
  Source counts = 49.9 +/- 7.1
  Background counts = 0.0
  Rate = 0.007 +/- 0.0009
[Sun May 26 00:40:32 2013] Vigneting correction estimate = 1.000000
[Sun May 26 00:40:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 26 00:40:32 2013] Assessing source extent using major axis lower bound
[Sun May 26 00:40:32 2013] Source does appear to be extended
[Sun May 26 00:40:32 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 26 02:09:42 2013] XMMSAS src. selection expression = ellipse(32777.380200, 9426.331700, 663.180019, 663.180019, 0.000000, X, Y)
[Sun May 26 02:09:42 2013] Not overwriting source region fullrun_mos2_xmm0018741001_pi300-10000_pass1_cl_src14_src.reg
[Sun May 26 02:09:42 2013] Extracting stamp from image fullrun_mos2_xmm0018741001_pi300-10000_cl_sm2.00.img.gz, (339, 71) - (415, 147)
[Sun May 26 02:09:42 2013] XMMSAS bgd. selection expression = annulus(32777.380200, 9426.331700, 1105.300032, 2210.600064, X, Y)
[Sun May 26 02:09:42 2013] Writing fullrun_mos2_xmm0018741001_pi300-10000_pass1_cl_src14.gif
[Sun May 26 02:09:43 2013] ../../xmm0018741001/products/events/fullrun_mos2_xmm0018741001_pi300-10000_pass1_cl_src14_src.evt and ../../xmm0018741001/products/events/fullrun_mos2_xmm0018741001_pi300-10000_pass1_cl_src14_bgd.evt exist, delete to re-create
[Sun May 26 02:09:43 2013] Mean detx,y = (2657.52, 16190.88) 
[Sun May 26 02:09:43 2013] ../../xmm0018741001/products/images/fullrun_mos2_xmm0018741001_pi300-10000_pass1_cl_src14_src.img and ../../xmm0018741001/products/images/fullrun_mos2_xmm0018741001_pi300-10000_pass1_cl_src14_bgd.img exist, delete to re-create
[Sun May 26 02:09:43 2013] ../../xmm0018741001/products/spectra/fullrun_mos2_xmm0018741001_pi300-10000_pass1_cl_src14_src_b10.pi.gz and ../../xmm0018741001/products/spectra/fullrun_mos2_xmm0018741001_pi300-10000_pass1_cl_src14_bgd.pi exist, delete to re-create
[Sun May 26 02:09:43 2013] Setting source spectrum file to fullrun_mos2_xmm0018741001_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Sun May 26 02:09:43 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0018741001_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Sun May 26 02:09:43 2013] ../../xmm0018741001/products/lightcurves/fullrun_mos2_xmm0018741001_pi300-10000_pass1_cl_src14_src.lc and ../../xmm0018741001/products/lightcurves/fullrun_mos2_xmm0018741001_pi300-10000_pass1_cl_src14_bgd.lc exist, delete to re-create
[Sun May 26 02:09:47 2013] Not generating rmf since there are only 49 counts
[Sun May 26 02:09:47 2013] rmf not generated due to insufficient counts
[Sun May 26 02:09:47 2013] fullrun_mos2_xmm0018741001_pi300-10000_pass1_cl_src14.arf exists, delete to re-create
[Sun May 26 02:10:14 2013] Updating aperture counts using extracted products
[Sun May 26 02:10:14 2013] Total counts from fullrun_mos2_xmm0018741001_pi300-10000_pass1_cl_src14_src_b10.pi.gz = 50.00
[Sun May 26 02:10:14 2013] Total counts from fullrun_mos2_xmm0018741001_pi300-10000_pass1_cl_src14_bgd.pi.gz = 54.00
[Sun May 26 02:10:14 2013] Got source and background scale factors 1134426.000000, 6124231.000000
[Sun May 26 02:10:14 2013] User source parameters:
  Position = (377.3, 108.9) = 15 18 21.12 6 1 57.8
  Extent = 11.1 (7.8-12.8)", rotation angle = 0
  Source aperture counts = 40.0 +/- 8.1
  Background aperture counts = 10.0
  Rate = 0.005 +/- 0.001

[Sun May 26 02:10:16 2013] Calculating source flux in energy range 0.30-8.00
[Sun May 26 02:10:16 2013] Using photon index=1.80, rate=0.00671, arf fullrun_mos2_xmm0018741001_pi300-10000_pass1_cl_src14.arf
[Sun May 26 02:10:16 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 26 02:10:16 2013] Updating source flux to 2.2e-13
[Sun May 26 02:10:23 2013] Source 14 has fewer than 100.000000 counts, skipping spectral fitting
[Sun May 26 02:10:24 2013] xmm0018741001/analysis//spectral/fullrun_mos2_xmm0018741001_pi300-10000_pass1_cl_src14_pl.csv not found, spectral fit skipped or did not complete