[Sun May 26 00:39:17 2013] Detection parameters:
  Position = (285.8, 261.0) = 15 18 47.82 6 13 0.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 281.0 +/- 20.8
  Background counts = 8.9
  Rate = 0.04 +/- 0.003

[Sun May 26 00:39:17 2013] Off-axis axis estimate = 2.87'
[Sun May 26 00:39:44 2013] Using EEF radius (= 7.86 ")to estimate initial spatial extent for simple fitting
[Sun May 26 00:39:44 2013] Initial guess for spatial extent in simple fitting = 7.86"
[Sun May 26 00:39:44 2013] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.939
[Sun May 26 00:39:44 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 7.86"
[Sun May 26 00:39:45 2013] fullrun_mos2_xmm0018741001_pi300-10000_cl_pass0_src2.ximg exists
[Sun May 26 00:39:45 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0018741001_pi300-10000_cl_pass0_src2.csv
[Sun May 26 00:39:45 2013] fullrun_mos2_xmm0018741001_pi300-10000_cl_pass0_src2_1.ximg exists
[Sun May 26 00:39:45 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0018741001_pi300-10000_cl_pass0_src2.csv
[Sun May 26 00:39:45 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018741001_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018741001_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 26 00:39:45 2013] fullrun_mos2_xmm0018741001_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Sun May 26 00:39:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018741001_pi300-10000_cl_pass0_tfrozen_src2.csv
[Sun May 26 00:39:45 2013] fullrun_mos2_xmm0018741001_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Sun May 26 00:39:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018741001_pi300-10000_cl_pass0_tfrozen_src2.csv
[Sun May 26 00:39:45 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018741001_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018741001_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 26 00:40:01 2013] Source 1 is offset by -7.469642 and 6.229133 pixels which is larger than
2 X fitted extent = 0.903605 x 0.903605, not incorporating fit results
[Sun May 26 00:40:01 2013] Vigneting correction estimate = 1.000000
[Sun May 26 00:40:01 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 26 00:40:01 2013] Assessing source extent using major
[Sun May 26 00:40:01 2013] Source does appear to be extended
[Sun May 26 00:40:01 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 26 00:40:14 2013] Using EEF radius (= 7.86 ")to estimate initial spatial extent for simple fitting
[Sun May 26 00:40:14 2013] Initial guess for spatial extent in simple fitting = 7.86"
[Sun May 26 00:40:14 2013] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.939
[Sun May 26 00:40:14 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 7.86"
[Sun May 26 00:40:15 2013] fullrun_mos2_xmm0018741001_pi300-10000_cl_pass1_src2.ximg exists
[Sun May 26 00:40:15 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0018741001_pi300-10000_cl_pass1_src2.csv
[Sun May 26 00:40:15 2013] fullrun_mos2_xmm0018741001_pi300-10000_cl_pass1_src2_1.ximg exists
[Sun May 26 00:40:15 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0018741001_pi300-10000_cl_pass1_src2.csv
[Sun May 26 00:40:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018741001_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018741001_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 26 00:40:15 2013] fullrun_mos2_xmm0018741001_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Sun May 26 00:40:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018741001_pi300-10000_cl_pass1_tfrozen_src2.csv
[Sun May 26 00:40:15 2013] fullrun_mos2_xmm0018741001_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Sun May 26 00:40:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018741001_pi300-10000_cl_pass1_tfrozen_src2.csv
[Sun May 26 00:40:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018741001_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018741001_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 26 00:40:32 2013] Source 1 is offset by 6.051209 and 4.762719 pixels which is larger than
2 X fitted extent = 1.060235 x 0.843407, not incorporating fit results
[Sun May 26 00:40:32 2013] Vigneting correction estimate = 1.000000
[Sun May 26 00:40:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 26 00:40:32 2013] Assessing source extent using major
[Sun May 26 00:40:32 2013] Source does appear to be extended
[Sun May 26 00:40:32 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 26 02:09:42 2013] XMMSAS src. selection expression = ellipse(24812.549164, 22658.526550, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May 26 02:09:42 2013] Not overwriting source region fullrun_mos2_xmm0018741001_pi300-10000_pass1_cl_src1_src.reg
[Sun May 26 02:09:42 2013] Extracting stamp from image fullrun_mos2_xmm0018741001_pi300-10000_cl_sm2.00.img.gz, (248, 224) - (323, 299)
[Sun May 26 02:09:42 2013] XMMSAS bgd. selection expression = annulus(24812.549164, 22658.526550, 1087.500000, 2175.000000, X, Y) && !ellipse(25412.776947, 23792.415222, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 26 02:09:42 2013] Writing fullrun_mos2_xmm0018741001_pi300-10000_pass1_cl_src1.gif
[Sun May 26 02:09:42 2013] ../../xmm0018741001/products/events/fullrun_mos2_xmm0018741001_pi300-10000_pass1_cl_src1_src.evt and ../../xmm0018741001/products/events/fullrun_mos2_xmm0018741001_pi300-10000_pass1_cl_src1_bgd.evt exist, delete to re-create
[Sun May 26 02:09:42 2013] Mean detx,y = (-822.81, 1087.05) 
[Sun May 26 02:09:42 2013] ../../xmm0018741001/products/images/fullrun_mos2_xmm0018741001_pi300-10000_pass1_cl_src1_src.img and ../../xmm0018741001/products/images/fullrun_mos2_xmm0018741001_pi300-10000_pass1_cl_src1_bgd.img exist, delete to re-create
[Sun May 26 02:09:42 2013] ../../xmm0018741001/products/spectra/fullrun_mos2_xmm0018741001_pi300-10000_pass1_cl_src1_src_b10.pi.gz and ../../xmm0018741001/products/spectra/fullrun_mos2_xmm0018741001_pi300-10000_pass1_cl_src1_bgd.pi exist, delete to re-create
[Sun May 26 02:09:42 2013] Setting source spectrum file to fullrun_mos2_xmm0018741001_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun May 26 02:09:42 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0018741001_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun May 26 02:09:42 2013] ../../xmm0018741001/products/lightcurves/fullrun_mos2_xmm0018741001_pi300-10000_pass1_cl_src1_src.lc and ../../xmm0018741001/products/lightcurves/fullrun_mos2_xmm0018741001_pi300-10000_pass1_cl_src1_bgd.lc exist, delete to re-create
[Sun May 26 02:09:47 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun May 26 02:09:47 2013] rmf not generated due to insufficient counts
[Sun May 26 02:09:47 2013] fullrun_mos2_xmm0018741001_pi300-10000_pass1_cl_src1.arf exists, delete to re-create
[Sun May 26 02:10:12 2013] Updating aperture counts using extracted products
[Sun May 26 02:10:12 2013] Total counts from fullrun_mos2_xmm0018741001_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 392.00
[Sun May 26 02:10:12 2013] Total counts from fullrun_mos2_xmm0018741001_pi300-10000_pass1_cl_src1_bgd.pi.gz = 757.00
[Sun May 26 02:10:12 2013] Got source and background scale factors 1143892.000000, 9148768.000000
[Sun May 26 02:10:12 2013] User source parameters:
  Position = (285.8, 261.0) = 15 18 47.82 6 13 0.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 297.4 +/- 20.8
  Background aperture counts = 94.6
  Rate = 0.04 +/- 0.003

[Sun May 26 02:10:12 2013] Updating counts from extracted products
[Sun May 26 02:10:12 2013] Set source signif. to 297.35/9.73 = 30.56
[Sun May 26 02:10:16 2013] Calculating source flux in energy range 0.30-8.00
[Sun May 26 02:10:16 2013] Using photon index=1.80, rate=0.04, arf fullrun_mos2_xmm0018741001_pi300-10000_pass1_cl_src1.arf
[Sun May 26 02:10:16 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 26 02:10:16 2013] Updating source flux to 4.1e-13
[Sun May 26 02:10:23 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun May 26 02:10:24 2013] xmm0018741001/analysis//spectral/fullrun_mos2_xmm0018741001_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete