[Sun May 26 00:39:16 2013] Detection parameters:
  Position = (276.0, 303.9) = 15 18 50.67 6 16 6.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 56.5 +/- 10.1
  Background counts = 7.6
  Rate = 0.008 +/- 0.001

[Sun May 26 00:39:16 2013] Off-axis axis estimate = 1.67'
[Sun May 26 00:39:43 2013] Using EEF radius (= 7.27 ")to estimate initial spatial extent for simple fitting
[Sun May 26 00:39:43 2013] Initial guess for spatial extent in simple fitting = 7.27"
[Sun May 26 00:39:43 2013] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.849
[Sun May 26 00:39:43 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 7.27"
[Sun May 26 00:39:44 2013] fullrun_mos1_xmm0018741001_pi300-10000_cl_pass0_src4.ximg exists
[Sun May 26 00:39:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018741001_pi300-10000_cl_pass0_src4.csv
[Sun May 26 00:39:44 2013] fullrun_mos1_xmm0018741001_pi300-10000_cl_pass0_src4_1.ximg exists
[Sun May 26 00:39:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018741001_pi300-10000_cl_pass0_src4.csv
[Sun May 26 00:39:44 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0018741001_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0018741001_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 26 00:39:44 2013] fullrun_mos1_xmm0018741001_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Sun May 26 00:39:44 2013] fullrun_mos1_xmm0018741001_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Sun May 26 00:39:44 2013] Fit fullrun_mos1_xmm0018741001_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Sun May 26 00:39:58 2013] Source 9 is offset by -6.689138 and -6.802297 pixels which is larger than
2 X fitted extent = 0.835145 x 0.835145, not incorporating fit results
[Sun May 26 00:39:58 2013] Vigneting correction estimate = 1.000000
[Sun May 26 00:39:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 26 00:39:58 2013] Assessing source extent using major
[Sun May 26 00:39:58 2013] Source does appear to be extended
[Sun May 26 00:39:58 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 26 00:40:14 2013] Using EEF radius (= 7.27 ")to estimate initial spatial extent for simple fitting
[Sun May 26 00:40:14 2013] Initial guess for spatial extent in simple fitting = 7.27"
[Sun May 26 00:40:14 2013] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.849
[Sun May 26 00:40:14 2013] Giving source the simple spatial ID 4 for pass 1, mean size = 7.27"
[Sun May 26 00:40:14 2013] fullrun_mos1_xmm0018741001_pi300-10000_cl_pass1_src4.ximg exists
[Sun May 26 00:40:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018741001_pi300-10000_cl_pass1_src4.csv
[Sun May 26 00:40:14 2013] fullrun_mos1_xmm0018741001_pi300-10000_cl_pass1_src4_1.ximg exists
[Sun May 26 00:40:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018741001_pi300-10000_cl_pass1_src4.csv
[Sun May 26 00:40:14 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0018741001_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0018741001_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 26 00:40:14 2013] fullrun_mos1_xmm0018741001_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Sun May 26 00:40:14 2013] fullrun_mos1_xmm0018741001_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Sun May 26 00:40:14 2013] Fit fullrun_mos1_xmm0018741001_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Sun May 26 00:40:28 2013] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 9 at 50.670848 pixels away
[Sun May 26 00:40:28 2013] Spatial fit model total counts = 140.999000, observed total counts = 141.000000
[Sun May 26 00:40:28 2013] Offset between fit and detection position for source 9 = 0.202052 pixels
[Sun May 26 00:40:28 2013] 139.965900 total counts/ 106.973000 bgd. counts: snr = 3.189947
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.202052 pixels
  Position = (275.8, 303.8) = 15 18 50.73 6 16 5.8
  Extent = 4.2 (3.1-6.1)", rotation angle = 0
  Source counts = 33.0 +/- 11.8
  Background counts = 107.0
  Rate = 0.004 +/- 0.002
[Sun May 26 00:40:28 2013] Vigneting correction estimate = 1.000000
[Sun May 26 00:40:28 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 26 00:40:28 2013] Assessing source extent using major axis lower bound
[Sun May 26 00:40:28 2013] Source does appear to be extended
[Sun May 26 00:40:28 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 26 00:40:28 2013] Deleting source due to low Poisson probability 0.9