[Sun May 26 00:39:16 2013] Detection parameters: Position = (195.1, 367.7) = 15 19 14.28 6 20 44.3 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 27.9 +/- 6.9 Background counts = 2.5 Rate = 0.007 +/- 0.002 [Sun May 26 00:39:16 2013] Off-axis axis estimate = 9.02' [Sun May 26 00:39:43 2013] Using EEF radius (= 10.94 ")to estimate initial spatial extent for simple fitting [Sun May 26 00:39:43 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Sun May 26 00:39:43 2013] Initial guess for spatial extent in simple fitting = 10.94" [Sun May 26 00:39:43 2013] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.990 [Sun May 26 00:39:43 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 10.94" [Sun May 26 00:39:44 2013] fullrun_mos1_xmm0018741001_pi300-10000_cl_pass0_src5.ximg exists [Sun May 26 00:39:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018741001_pi300-10000_cl_pass0_src5.csv [Sun May 26 00:39:44 2013] fullrun_mos1_xmm0018741001_pi300-10000_cl_pass0_src5_1.ximg exists [Sun May 26 00:39:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018741001_pi300-10000_cl_pass0_src5.csv [Sun May 26 00:39:44 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0018741001_pi300-10000_cl_pass0_src5_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0018741001_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 26 00:39:44 2013] fullrun_mos1_xmm0018741001_pi300-10000_cl_pass0_tfrozen_src5.ximg exists [Sun May 26 00:39:44 2013] fullrun_mos1_xmm0018741001_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists [Sun May 26 00:39:44 2013] Fit fullrun_mos1_xmm0018741001_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly [Sun May 26 00:39:58 2013] Spatial fit model total counts = 62.057400, observed total counts = 62.000000 [Sun May 26 00:39:58 2013] Offset between fit and detection position for source 7 = 0.152305 pixels [Sun May 26 00:39:58 2013] 60.900100 total counts/ 45.693400 bgd. counts: snr = 2.249615 Spatial fit parameters: Offset between fit and detection position for source 7 = 0.152305 pixels Position = (195.0, 367.8) = 15 19 14.30 6 20 44.1 Extent = 4.3 (2.7-7.5)", rotation angle = 0 Source counts = 15.2 +/- 7.8 Background counts = 45.7 Rate = 0.002 +/- 0.001 [Sun May 26 00:39:58 2013] Vigneting correction estimate = 1.000000 [Sun May 26 00:39:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun May 26 00:39:58 2013] Assessing source extent using major axis lower bound [Sun May 26 00:39:58 2013] Source does appear to be extended [Sun May 26 00:39:58 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun May 26 00:39:58 2013] Deleting source due to low Poisson probability 0.8