[Sun May 26 00:39:15 2013] Detection parameters:
  Position = (245.4, 339.5) = 15 18 59.58 6 18 41.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 126.8 +/- 13.6
  Background counts = 3.3
  Rate = 0.02 +/- 0.002

[Sun May 26 00:39:16 2013] Off-axis axis estimate = 4.86'
[Sun May 26 00:39:43 2013] Using EEF radius (= 8.86 ")to estimate initial spatial extent for simple fitting
[Sun May 26 00:39:43 2013] Initial guess for spatial extent in simple fitting = 8.86"
[Sun May 26 00:39:43 2013] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.971
[Sun May 26 00:39:43 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 8.86"
[Sun May 26 00:39:44 2013] fullrun_mos1_xmm0018741001_pi300-10000_cl_pass0_src3.ximg exists
[Sun May 26 00:39:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018741001_pi300-10000_cl_pass0_src3.csv
[Sun May 26 00:39:44 2013] fullrun_mos1_xmm0018741001_pi300-10000_cl_pass0_src3_1.ximg exists
[Sun May 26 00:39:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018741001_pi300-10000_cl_pass0_src3.csv
[Sun May 26 00:39:44 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0018741001_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0018741001_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 26 00:39:44 2013] fullrun_mos1_xmm0018741001_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sun May 26 00:39:44 2013] fullrun_mos1_xmm0018741001_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sun May 26 00:39:44 2013] Fit fullrun_mos1_xmm0018741001_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Sun May 26 00:39:58 2013] Spatial fit model total counts = 147.722000, observed total counts = 144.000000
[Sun May 26 00:39:58 2013] Offset between fit and detection position for source 4 = 0.093742 pixels
[Sun May 26 00:39:58 2013] 147.146800 total counts/ 52.967500 bgd. counts: snr = 12.940490
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.093742 pixels
  Position = (245.4, 339.5) = 15 18 59.60 6 18 40.7
  Extent = 5.3 (4.2-6.4)", rotation angle = 0
  Source counts = 94.2 +/- 12.1
  Background counts = 53.0
  Rate = 0.01 +/- 0.002
[Sun May 26 00:39:58 2013] Vigneting correction estimate = 1.000000
[Sun May 26 00:39:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 26 00:39:58 2013] Assessing source extent using major axis lower bound
[Sun May 26 00:39:58 2013] Source does appear to be extended
[Sun May 26 00:39:58 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 26 00:40:14 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May 26 00:40:14 2013] Initial guess for spatial extent in simple fitting = 5.26"
[Sun May 26 00:40:14 2013] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.769
[Sun May 26 00:40:14 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 5.26"
[Sun May 26 00:40:14 2013] fullrun_mos1_xmm0018741001_pi300-10000_cl_pass1_src3.ximg exists
[Sun May 26 00:40:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018741001_pi300-10000_cl_pass1_src3.csv
[Sun May 26 00:40:14 2013] fullrun_mos1_xmm0018741001_pi300-10000_cl_pass1_src3_1.ximg exists
[Sun May 26 00:40:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018741001_pi300-10000_cl_pass1_src3.csv
[Sun May 26 00:40:14 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0018741001_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0018741001_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 26 00:40:14 2013] fullrun_mos1_xmm0018741001_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sun May 26 00:40:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018741001_pi300-10000_cl_pass1_tfrozen_src3.csv
[Sun May 26 00:40:14 2013] fullrun_mos1_xmm0018741001_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sun May 26 00:40:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018741001_pi300-10000_cl_pass1_tfrozen_src3.csv
[Sun May 26 00:40:14 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0018741001_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0018741001_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 26 00:40:28 2013] Warning, spatial fit 3 centroid is now closest to src. 9
[Sun May 26 00:40:28 2013] Vigneting correction estimate = 1.000000
[Sun May 26 00:40:28 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 26 00:40:28 2013] Assessing source extent using major axis lower bound
[Sun May 26 00:40:28 2013] Source does appear to be extended
[Sun May 26 00:40:28 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 26 02:09:40 2013] XMMSAS src. selection expression = ellipse(21298.483400, 29484.553800, 315.852609, 315.852609, 0.000000, X, Y)
[Sun May 26 02:09:40 2013] Not overwriting source region fullrun_mos1_xmm0018741001_pi300-10000_pass1_cl_src4_src.reg
[Sun May 26 02:09:40 2013] Extracting stamp from image fullrun_mos1_xmm0018741001_pi300-10000_cl_sm2.00.img.gz, (227, 321) - (264, 358)
[Sun May 26 02:09:40 2013] XMMSAS bgd. selection expression = annulus(21298.483400, 29484.553800, 526.421015, 1052.842030, X, Y)
[Sun May 26 02:09:40 2013] Writing fullrun_mos1_xmm0018741001_pi300-10000_pass1_cl_src4.gif
[Sun May 26 02:09:40 2013] ../../xmm0018741001/products/events/fullrun_mos1_xmm0018741001_pi300-10000_pass1_cl_src4_src.evt and ../../xmm0018741001/products/events/fullrun_mos1_xmm0018741001_pi300-10000_pass1_cl_src4_bgd.evt exist, delete to re-create
[Sun May 26 02:09:40 2013] Mean detx,y = (-6225.24, 1921.60) 
[Sun May 26 02:09:40 2013] ../../xmm0018741001/products/images/fullrun_mos1_xmm0018741001_pi300-10000_pass1_cl_src4_src.img and ../../xmm0018741001/products/images/fullrun_mos1_xmm0018741001_pi300-10000_pass1_cl_src4_bgd.img exist, delete to re-create
[Sun May 26 02:09:40 2013] ../../xmm0018741001/products/spectra/fullrun_mos1_xmm0018741001_pi300-10000_pass1_cl_src4_src_b10.pi.gz and ../../xmm0018741001/products/spectra/fullrun_mos1_xmm0018741001_pi300-10000_pass1_cl_src4_bgd.pi exist, delete to re-create
[Sun May 26 02:09:40 2013] Setting source spectrum file to fullrun_mos1_xmm0018741001_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sun May 26 02:09:40 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0018741001_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Sun May 26 02:09:40 2013] ../../xmm0018741001/products/lightcurves/fullrun_mos1_xmm0018741001_pi300-10000_pass1_cl_src4_src.lc and ../../xmm0018741001/products/lightcurves/fullrun_mos1_xmm0018741001_pi300-10000_pass1_cl_src4_bgd.lc exist, delete to re-create
[Sun May 26 02:09:42 2013] Not generating rmf since there are only 94 counts
[Sun May 26 02:09:42 2013] rmf not generated due to insufficient counts
[Sun May 26 02:09:42 2013] fullrun_mos1_xmm0018741001_pi300-10000_pass1_cl_src4.arf exists, delete to re-create
[Sun May 26 02:10:11 2013] Updating aperture counts using extracted products
[Sun May 26 02:10:11 2013] Total counts from fullrun_mos1_xmm0018741001_pi300-10000_pass1_cl_src4_src_b10.pi.gz = 102.00
[Sun May 26 02:10:11 2013] Total counts from fullrun_mos1_xmm0018741001_pi300-10000_pass1_cl_src4_bgd.pi.gz = 49.00
[Sun May 26 02:10:11 2013] Got source and background scale factors 308806.000000, 2343552.000000
[Sun May 26 02:10:11 2013] User source parameters:
  Position = (245.4, 339.5) = 15 18 59.60 6 18 40.7
  Extent = 5.3 (4.2-6.4)", rotation angle = 0
  Source aperture counts = 95.5 +/- 11.1
  Background aperture counts = 6.5
  Rate = 0.01 +/- 0.001

[Sun May 26 02:10:12 2013] Calculating source flux in energy range 0.30-8.00
[Sun May 26 02:10:12 2013] Using photon index=1.80, rate=0.0127, arf fullrun_mos1_xmm0018741001_pi300-10000_pass1_cl_src4.arf
[Sun May 26 02:10:12 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 26 02:10:12 2013] Updating source flux to 2.1e-13
[Sun May 26 02:10:19 2013] Source 4 has fewer than 100.000000 counts, skipping spectral fitting
[Sun May 26 02:10:23 2013] xmm0018741001/analysis//spectral/fullrun_mos1_xmm0018741001_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete