[Sun May 26 00:39:16 2013] Detection parameters:
  Position = (300.2, 283.9) = 15 18 43.61 6 14 39.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 40.6 +/- 10.8
  Background counts = 9.4
  Rate = 0.006 +/- 0.002

[Sun May 26 00:39:16 2013] Off-axis axis estimate = 1.06'
[Sun May 26 00:39:43 2013] Using EEF radius (= 6.96 ")to estimate initial spatial extent for simple fitting
[Sun May 26 00:39:43 2013] Initial guess for spatial extent in simple fitting = 6.96"
[Sun May 26 00:39:43 2013] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.907
[Sun May 26 00:39:43 2013] Giving source the simple spatial ID 9 for pass 0, mean size = 6.96"
[Sun May 26 00:39:44 2013] fullrun_mos1_xmm0018741001_pi300-10000_cl_pass0_src9.ximg exists
[Sun May 26 00:39:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018741001_pi300-10000_cl_pass0_src9.csv
[Sun May 26 00:39:44 2013] fullrun_mos1_xmm0018741001_pi300-10000_cl_pass0_src9_1.ximg exists
[Sun May 26 00:39:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018741001_pi300-10000_cl_pass0_src9.csv
[Sun May 26 00:39:44 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0018741001_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0018741001_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 26 00:39:44 2013] fullrun_mos1_xmm0018741001_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Sun May 26 00:39:44 2013] fullrun_mos1_xmm0018741001_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Sun May 26 00:39:44 2013] Fit fullrun_mos1_xmm0018741001_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Sun May 26 00:39:58 2013] Source 10 is offset by 6.564380 and 5.305781 pixels which is larger than
2 X fitted extent = 3.936998 x 3.936998, not incorporating fit results
[Sun May 26 00:39:58 2013] Vigneting correction estimate = 1.000000
[Sun May 26 00:39:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 26 00:39:58 2013] Assessing source extent using major
[Sun May 26 00:39:58 2013] Source does appear to be extended
[Sun May 26 00:39:58 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 26 00:40:14 2013] Using EEF radius (= 6.96 ")to estimate initial spatial extent for simple fitting
[Sun May 26 00:40:14 2013] Initial guess for spatial extent in simple fitting = 6.96"
[Sun May 26 00:40:14 2013] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.907
[Sun May 26 00:40:14 2013] Giving source the simple spatial ID 6 for pass 1, mean size = 6.96"
[Sun May 26 00:40:14 2013] fullrun_mos1_xmm0018741001_pi300-10000_cl_pass1_src6.ximg exists
[Sun May 26 00:40:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018741001_pi300-10000_cl_pass1_src6.csv
[Sun May 26 00:40:14 2013] fullrun_mos1_xmm0018741001_pi300-10000_cl_pass1_src6_1.ximg exists
[Sun May 26 00:40:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018741001_pi300-10000_cl_pass1_src6.csv
[Sun May 26 00:40:14 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0018741001_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0018741001_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 26 00:40:14 2013] fullrun_mos1_xmm0018741001_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Sun May 26 00:40:14 2013] fullrun_mos1_xmm0018741001_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Sun May 26 00:40:14 2013] Fit fullrun_mos1_xmm0018741001_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Sun May 26 00:40:28 2013] Source 10 is offset by 6.565920 and 5.305781 pixels which is larger than
2 X fitted extent = 3.934386 x 3.934386, not incorporating fit results
[Sun May 26 00:40:28 2013] Vigneting correction estimate = 1.000000
[Sun May 26 00:40:28 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 26 00:40:28 2013] Assessing source extent using major
[Sun May 26 00:40:28 2013] Source does appear to be extended
[Sun May 26 00:40:28 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 26 02:09:40 2013] XMMSAS src. selection expression = ellipse(26068.293060, 24651.372955, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May 26 02:09:40 2013] Not overwriting source region fullrun_mos1_xmm0018741001_pi300-10000_pass1_cl_src10_src.reg
[Sun May 26 02:09:40 2013] Extracting stamp from image fullrun_mos1_xmm0018741001_pi300-10000_cl_sm2.00.img.gz, (263, 246) - (338, 321)
[Sun May 26 02:09:40 2013] XMMSAS bgd. selection expression = annulus(26068.293060, 24651.372955, 1087.500000, 2175.000000, X, Y) && !ellipse(25415.052600, 23794.080000, 460.194413, 460.194413, 0.000000, X, Y) && !ellipse(24823.349420, 22646.374200, 272.035208, 272.035208, 0.000000, X, Y)
[Sun May 26 02:09:40 2013] Writing fullrun_mos1_xmm0018741001_pi300-10000_pass1_cl_src10.gif
[Sun May 26 02:09:40 2013] ../../xmm0018741001/products/events/fullrun_mos1_xmm0018741001_pi300-10000_pass1_cl_src10_src.evt and ../../xmm0018741001/products/events/fullrun_mos1_xmm0018741001_pi300-10000_pass1_cl_src10_bgd.evt exist, delete to re-create
[Sun May 26 02:09:40 2013] Mean detx,y = (-66.40, -924.89) 
[Sun May 26 02:09:40 2013] ../../xmm0018741001/products/images/fullrun_mos1_xmm0018741001_pi300-10000_pass1_cl_src10_src.img and ../../xmm0018741001/products/images/fullrun_mos1_xmm0018741001_pi300-10000_pass1_cl_src10_bgd.img exist, delete to re-create
[Sun May 26 02:09:40 2013] ../../xmm0018741001/products/spectra/fullrun_mos1_xmm0018741001_pi300-10000_pass1_cl_src10_src_b10.pi.gz and ../../xmm0018741001/products/spectra/fullrun_mos1_xmm0018741001_pi300-10000_pass1_cl_src10_bgd.pi exist, delete to re-create
[Sun May 26 02:09:40 2013] Setting source spectrum file to fullrun_mos1_xmm0018741001_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Sun May 26 02:09:40 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0018741001_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Sun May 26 02:09:40 2013] ../../xmm0018741001/products/lightcurves/fullrun_mos1_xmm0018741001_pi300-10000_pass1_cl_src10_src.lc and ../../xmm0018741001/products/lightcurves/fullrun_mos1_xmm0018741001_pi300-10000_pass1_cl_src10_bgd.lc exist, delete to re-create
[Sun May 26 02:09:42 2013] Not generating rmf since there are only 40 counts
[Sun May 26 02:09:42 2013] rmf not generated due to insufficient counts
[Sun May 26 02:09:42 2013] fullrun_mos1_xmm0018741001_pi300-10000_pass1_cl_src10.arf exists, delete to re-create
[Sun May 26 02:10:11 2013] Updating aperture counts using extracted products
[Sun May 26 02:10:11 2013] Total counts from fullrun_mos1_xmm0018741001_pi300-10000_pass1_cl_src10_src_b10.pi.gz = 420.00
[Sun May 26 02:10:12 2013] Total counts from fullrun_mos1_xmm0018741001_pi300-10000_pass1_cl_src10_bgd.pi.gz = 1595.00
[Sun May 26 02:10:12 2013] Got source and background scale factors 1343180.000000, 10637184.000000
[Sun May 26 02:10:12 2013] User source parameters:
  Position = (300.2, 283.9) = 15 18 43.61 6 14 39.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 218.6 +/- 21.5
  Background aperture counts = 201.4
  Rate = 0.03 +/- 0.003

[Sun May 26 02:10:12 2013] Updating counts from extracted products
[Sun May 26 02:10:12 2013] Set source signif. to 218.60/14.19 = 15.40
[Sun May 26 02:10:12 2013] Calculating source flux in energy range 0.30-8.00
[Sun May 26 02:10:12 2013] Using photon index=1.80, rate=0.0294, arf fullrun_mos1_xmm0018741001_pi300-10000_pass1_cl_src10.arf
[Sun May 26 02:10:12 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 26 02:10:12 2013] Updating source flux to 2.9e-13
[Sun May 26 02:10:19 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun May 26 02:10:23 2013] xmm0018741001/analysis//spectral/fullrun_mos1_xmm0018741001_pi300-10000_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete