[Fri Jun 15 05:26:16 2012] Detection parameters:
  Position = (331.0, 295.1) = 0 59 17.95 -72 10 19.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 660.3 +/- 35.8
  Background counts = 74.8
  Rate = 0.03 +/- 0.002

[Fri Jun 15 05:26:16 2012] Off-axis axis estimate = 2.37'
[Fri Jun 15 05:28:13 2012] Using EEF radius (= 7.61 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 05:28:13 2012] Initial guess for spatial extent in simple fitting = 7.61"
[Fri Jun 15 05:28:13 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.790
[Fri Jun 15 05:28:13 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 7.61"
[Fri Jun 15 05:57:13 2012] fullrun_pn_xmm0018540101_pi300-10000_cl_pass0_src7.ximg exists
[Fri Jun 15 05:57:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018540101_pi300-10000_cl_pass0_src7.csv
[Fri Jun 15 05:57:13 2012] fullrun_pn_xmm0018540101_pi300-10000_cl_pass0_src7_1.ximg exists
[Fri Jun 15 05:57:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018540101_pi300-10000_cl_pass0_src7.csv
[Fri Jun 15 05:57:13 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0018540101_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0018540101_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 05:57:13 2012] fullrun_pn_xmm0018540101_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Fri Jun 15 05:57:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018540101_pi300-10000_cl_pass0_tfrozen_src7.csv
[Fri Jun 15 05:57:14 2012] fullrun_pn_xmm0018540101_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Fri Jun 15 05:57:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018540101_pi300-10000_cl_pass0_tfrozen_src7.csv
[Fri Jun 15 05:57:14 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0018540101_pi300-10000_cl_pass0_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0018540101_pi300-10000_cl_pass0_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 07:13:22 2012] Source 8 is offset by 2.508416 and -2.346014 pixels which is larger than
2 X fitted extent = 1.072952 x 1.072952, not incorporating fit results
[Fri Jun 15 07:13:22 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 07:13:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 07:13:22 2012] Assessing source extent using major
[Fri Jun 15 07:13:22 2012] Source does appear to be extended
[Fri Jun 15 07:13:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 07:13:41 2012] Using EEF radius (= 7.61 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 07:13:41 2012] Initial guess for spatial extent in simple fitting = 7.61"
[Fri Jun 15 07:13:41 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.790
[Fri Jun 15 07:13:41 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 7.61"
[Fri Jun 15 07:35:17 2012] fullrun_pn_xmm0018540101_pi300-10000_cl_pass1_src7.ximg exists
[Fri Jun 15 07:35:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018540101_pi300-10000_cl_pass1_src7.csv
[Fri Jun 15 07:35:17 2012] fullrun_pn_xmm0018540101_pi300-10000_cl_pass1_src7_1.ximg exists
[Fri Jun 15 07:35:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018540101_pi300-10000_cl_pass1_src7.csv
[Fri Jun 15 07:35:17 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0018540101_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0018540101_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 07:35:17 2012] fullrun_pn_xmm0018540101_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Fri Jun 15 07:35:17 2012] fullrun_pn_xmm0018540101_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Fri Jun 15 07:35:17 2012] Fit fullrun_pn_xmm0018540101_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Fri Jun 15 08:53:40 2012] Source 8 is offset by 6.618094 and -7.024159 pixels which is larger than
2 X fitted extent = 0.942156 x 0.942156, not incorporating fit results
[Fri Jun 15 08:53:40 2012] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 8 at 15.429131 pixels away
[Fri Jun 15 08:53:40 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 08:53:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 08:53:40 2012] Assessing source extent using major
[Fri Jun 15 08:53:40 2012] Source does appear to be extended
[Fri Jun 15 08:53:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 08:53:55 2012] XMMSAS src. selection expression = ellipse(28747.552155, 25620.870178, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 15 08:53:55 2012] Writing source region out to fullrun_pn_xmm0018540101_pi300-10000_pass1_cl_src8_src.reg
[Fri Jun 15 08:53:55 2012] Extracting stamp from image fullrun_pn_xmm0018540101_pi300-10000_cl_sm2.00.img.gz, (293, 258) - (368, 333)
[Fri Jun 15 08:53:55 2012] XMMSAS bgd. selection expression = annulus(28747.552155, 25620.870178, 1087.500000, 2175.000000, X, Y) && !ellipse(28019.394400, 25988.055400, 1080.192031, 1080.192031, 0.000000, X, Y) && !ellipse(29839.074524, 25526.252899, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27391.688400, 25352.233200, 1140.344033, 1140.344033, 0.000000, X, Y) && !ellipse(30040.062897, 23052.384216, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28461.239105, 27226.257538, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27451.526154, 26727.202301, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 15 08:53:55 2012] Writing fullrun_pn_xmm0018540101_pi300-10000_pass1_cl_src8.gif
[Fri Jun 15 08:59:32 2012] Mean detx,y = (937.20, -440.91) 
[Fri Jun 15 08:59:34 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 15 08:59:44 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 15 08:59:44 2012] Setting source spectrum file to fullrun_pn_xmm0018540101_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Fri Jun 15 08:59:44 2012] Setting bgd. spectrum file to fullrun_pn_xmm0018540101_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Fri Jun 15 09:11:45 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jun 15 09:11:45 2012] rmf not generated due to insufficient counts
[Fri Jun 15 10:35:01 2012] Updating aperture counts using extracted products
[Fri Jun 15 10:35:01 2012] Error reading totcts from fullrun_pn_xmm0018540101_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Fri Jun 15 10:35:02 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 15 10:35:02 2012] Using photon index=1.80, rate=0.0313, arf fullrun_pn_xmm0018540101_pi300-10000_pass1_cl_src8.arf
[Fri Jun 15 10:35:02 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 15 10:35:02 2012] Updating source flux to 7.9e-14
[Fri Jun 15 10:37:31 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting