[Fri Jun 15 05:26:16 2012] Detection parameters:
  Position = (219.9, 341.1) = 1 1 2.92 -72 6 56.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 114.8 +/- 16.3
  Background counts = 57.4
  Rate = 0.009 +/- 0.001

[Fri Jun 15 05:26:16 2012] Off-axis axis estimate = 6.48'
[Fri Jun 15 05:28:13 2012] Using EEF radius (= 9.67 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 05:28:13 2012] Initial guess for spatial extent in simple fitting = 9.67"
[Fri Jun 15 05:28:13 2012] source mask rpix=2.2, npix_max = 29, mask sum = 36, frac = 1.214
[Fri Jun 15 05:28:13 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 9.67"
[Fri Jun 15 05:57:13 2012] fullrun_pn_xmm0018540101_pi300-10000_cl_pass0_src15.ximg exists
[Fri Jun 15 05:57:13 2012] fullrun_pn_xmm0018540101_pi300-10000_cl_pass0_src15_1.ximg exists
[Fri Jun 15 05:57:13 2012] Fit fullrun_pn_xmm0018540101_pi300-10000_cl_pass0_src15 appears to have run properly
[Fri Jun 15 05:57:14 2012] fullrun_pn_xmm0018540101_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Fri Jun 15 05:57:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018540101_pi300-10000_cl_pass0_tfrozen_src15.csv
[Fri Jun 15 05:57:14 2012] fullrun_pn_xmm0018540101_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Fri Jun 15 05:57:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018540101_pi300-10000_cl_pass0_tfrozen_src15.csv
[Fri Jun 15 05:57:14 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0018540101_pi300-10000_cl_pass0_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0018540101_pi300-10000_cl_pass0_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 07:13:22 2012] Warning: source 15 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 17 at 13.872937 pixels away
[Fri Jun 15 07:13:22 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 07:13:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 07:13:22 2012] Assessing source extent using major
[Fri Jun 15 07:13:22 2012] Source does appear to be extended
[Fri Jun 15 07:13:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 07:13:41 2012] Using EEF radius (= 9.67 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 07:13:41 2012] Initial guess for spatial extent in simple fitting = 9.67"
[Fri Jun 15 07:13:41 2012] source mask rpix=2.2, npix_max = 29, mask sum = 36, frac = 1.214
[Fri Jun 15 07:13:41 2012] Giving source the simple spatial ID 14 for pass 1, mean size = 9.67"
[Fri Jun 15 07:35:17 2012] fullrun_pn_xmm0018540101_pi300-10000_cl_pass1_src14.ximg exists
[Fri Jun 15 07:35:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018540101_pi300-10000_cl_pass1_src14.csv
[Fri Jun 15 07:35:17 2012] fullrun_pn_xmm0018540101_pi300-10000_cl_pass1_src14_1.ximg exists
[Fri Jun 15 07:35:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018540101_pi300-10000_cl_pass1_src14.csv
[Fri Jun 15 07:35:17 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0018540101_pi300-10000_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0018540101_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 07:35:18 2012] fullrun_pn_xmm0018540101_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Fri Jun 15 07:35:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018540101_pi300-10000_cl_pass1_tfrozen_src14.csv
[Fri Jun 15 07:35:18 2012] fullrun_pn_xmm0018540101_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Fri Jun 15 07:35:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018540101_pi300-10000_cl_pass1_tfrozen_src14.csv
[Fri Jun 15 07:35:18 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0018540101_pi300-10000_cl_pass1_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0018540101_pi300-10000_cl_pass1_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 08:53:40 2012] Source 17 is offset by -4.472471 and 7.908020 pixels which is larger than
2 X fitted extent = 1.116361 x 1.116361, not incorporating fit results
[Fri Jun 15 08:53:40 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 08:53:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 08:53:40 2012] Assessing source extent using major
[Fri Jun 15 08:53:40 2012] Source does appear to be extended
[Fri Jun 15 08:53:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 08:53:56 2012] XMMSAS src. selection expression = ellipse(19085.331039, 29627.837738, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 15 08:53:56 2012] Writing source region out to fullrun_pn_xmm0018540101_pi300-10000_pass1_cl_src17_src.reg
[Fri Jun 15 08:53:56 2012] Extracting stamp from image fullrun_pn_xmm0018540101_pi300-10000_cl_sm2.00.img.gz, (182, 304) - (257, 379)
[Fri Jun 15 08:53:56 2012] XMMSAS bgd. selection expression = annulus(19085.331039, 29627.837738, 1087.500000, 2175.000000, X, Y)
[Fri Jun 15 08:53:56 2012] Writing fullrun_pn_xmm0018540101_pi300-10000_pass1_cl_src17.gif
[Fri Jun 15 09:03:08 2012] Mean detx,y = (-8307.09, 4260.38) 
[Fri Jun 15 09:03:10 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 15 09:03:22 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 15 09:03:22 2012] Setting source spectrum file to fullrun_pn_xmm0018540101_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Fri Jun 15 09:03:22 2012] Setting bgd. spectrum file to fullrun_pn_xmm0018540101_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Fri Jun 15 09:24:26 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jun 15 09:24:26 2012] rmf not generated due to insufficient counts
[Fri Jun 15 10:35:01 2012] Updating aperture counts using extracted products
[Fri Jun 15 10:35:01 2012] Error reading totcts from fullrun_pn_xmm0018540101_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Fri Jun 15 10:35:02 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 15 10:35:02 2012] Using photon index=1.80, rate=0.0093, arf fullrun_pn_xmm0018540101_pi300-10000_pass1_cl_src17.arf
[Fri Jun 15 10:35:02 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 15 10:35:02 2012] Updating source flux to 4.4e-14
[Fri Jun 15 10:37:31 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting