[Fri Jun 15 05:26:48 2012] Detection parameters:
  Position = (219.9, 340.6) = 1 1 2.92 -72 6 59.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 70.2 +/- 11.7
  Background counts = 15.1
  Rate = 0.004 +/- 0.0007

[Fri Jun 15 05:26:48 2012] Off-axis axis estimate = 6.46'
[Fri Jun 15 06:32:24 2012] Using EEF radius (= 9.66 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 06:32:24 2012] Initial guess for spatial extent in simple fitting = 9.66"
[Fri Jun 15 06:32:24 2012] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.014
[Fri Jun 15 06:32:24 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 9.66"
[Fri Jun 15 07:13:16 2012] fullrun_mos2_xmm0018540101_pi300-10000_cl_pass0_src15.ximg exists
[Fri Jun 15 07:13:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018540101_pi300-10000_cl_pass0_src15.csv
[Fri Jun 15 07:13:16 2012] fullrun_mos2_xmm0018540101_pi300-10000_cl_pass0_src15_1.ximg exists
[Fri Jun 15 07:13:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018540101_pi300-10000_cl_pass0_src15.csv
[Fri Jun 15 07:13:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018540101_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018540101_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 07:13:17 2012] fullrun_mos2_xmm0018540101_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Fri Jun 15 07:13:17 2012] fullrun_mos2_xmm0018540101_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Fri Jun 15 07:13:17 2012] Fit fullrun_mos2_xmm0018540101_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Fri Jun 15 07:13:32 2012] Spatial fit model total counts = 207.732000, observed total counts = 206.000000
[Fri Jun 15 07:13:32 2012] Offset between fit and detection position for source 9 = 0.022615 pixels
[Fri Jun 15 07:13:32 2012] 205.436700 total counts/ 161.305000 bgd. counts: snr = 3.474775
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.022615 pixels
  Position = (219.9, 340.6) = 1 1 2.94 -72 7 0.2
  Extent = 4.8 (3.3-6.7)", rotation angle = 0
  Source counts = 44.1 +/- 14.3
  Background counts = 161.3
  Rate = 0.002 +/- 0.0005
[Fri Jun 15 07:13:32 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 07:13:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 07:13:32 2012] Assessing source extent using major axis lower bound
[Fri Jun 15 07:13:32 2012] Source does appear to be extended
[Fri Jun 15 07:13:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 08:14:37 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun 15 08:14:37 2012] Initial guess for spatial extent in simple fitting = 4.79"
[Fri Jun 15 08:14:37 2012] source mask rpix=1.1, npix_max = 10, mask sum = 12, frac = 1.170
[Fri Jun 15 08:14:37 2012] Giving source the simple spatial ID 15 for pass 1, mean size = 4.79"
[Fri Jun 15 08:53:36 2012] fullrun_mos2_xmm0018540101_pi300-10000_cl_pass1_src15.ximg exists
[Fri Jun 15 08:53:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018540101_pi300-10000_cl_pass1_src15.csv
[Fri Jun 15 08:53:36 2012] fullrun_mos2_xmm0018540101_pi300-10000_cl_pass1_src15_1.ximg exists
[Fri Jun 15 08:53:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018540101_pi300-10000_cl_pass1_src15.csv
[Fri Jun 15 08:53:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018540101_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018540101_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 08:53:37 2012] fullrun_mos2_xmm0018540101_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Fri Jun 15 08:53:37 2012] fullrun_mos2_xmm0018540101_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Fri Jun 15 08:53:37 2012] Fit fullrun_mos2_xmm0018540101_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly
[Fri Jun 15 08:53:46 2012] Spatial fit model total counts = 207.726000, observed total counts = 206.000000
[Fri Jun 15 08:53:46 2012] Offset between fit and detection position for source 9 = 0.010988 pixels
[Fri Jun 15 08:53:46 2012] 205.438600 total counts/ 160.902000 bgd. counts: snr = 3.511045
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.010988 pixels
  Position = (219.9, 340.6) = 1 1 2.94 -72 7 0.2
  Extent = 4.9 (3.3-6.7)", rotation angle = 0
  Source counts = 44.5 +/- 14.3
  Background counts = 160.9
  Rate = 0.002 +/- 0.0005
[Fri Jun 15 08:53:47 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 08:53:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 08:53:47 2012] Assessing source extent using major axis lower bound
[Fri Jun 15 08:53:47 2012] Source does appear to be extended
[Fri Jun 15 08:53:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 10:02:57 2012] XMMSAS src. selection expression = ellipse(19084.696580, 29581.805800, 291.323408, 291.323408, 0.000000, X, Y)
[Fri Jun 15 10:02:57 2012] Writing source region out to fullrun_mos2_xmm0018540101_pi300-10000_pass1_cl_src9_src.reg
[Fri Jun 15 10:02:57 2012] Extracting stamp from image fullrun_mos2_xmm0018540101_pi300-10000_cl_sm2.00.img.gz, (203, 324) - (237, 357)
[Fri Jun 15 10:02:57 2012] XMMSAS bgd. selection expression = annulus(19084.696580, 29581.805800, 485.539014, 971.078028, X, Y)
[Fri Jun 15 10:02:57 2012] Writing fullrun_mos2_xmm0018540101_pi300-10000_pass1_cl_src9.gif
[Fri Jun 15 10:07:02 2012] Mean detx,y = (8372.25, -4515.61) 
[Fri Jun 15 10:07:04 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 15 10:07:11 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 15 10:07:12 2012] Setting source spectrum file to fullrun_mos2_xmm0018540101_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Fri Jun 15 10:07:12 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0018540101_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Fri Jun 15 10:33:02 2012] Not generating rmf since there are only 44 counts
[Fri Jun 15 10:33:02 2012] rmf not generated due to insufficient counts
[Fri Jun 15 10:35:04 2012] Updating aperture counts using extracted products
[Fri Jun 15 10:35:05 2012] Error reading totcts from fullrun_mos2_xmm0018540101_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Fri Jun 15 10:35:05 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 15 10:35:05 2012] Using photon index=1.80, rate=0.00165, arf fullrun_mos2_xmm0018540101_pi300-10000_pass1_cl_src9.arf
[Fri Jun 15 10:35:05 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 15 10:35:05 2012] Updating source flux to 3.8e-14
[Fri Jun 15 10:36:23 2012] Source 9 has fewer than 100.000000 counts, skipping spectral fitting