[Fri Jun 15 05:26:48 2012] Detection parameters:
  Position = (327.3, 115.8) = 0 59 21.14 -72 23 19.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 452.8 +/- 26.0
  Background counts = 14.7
  Rate = 0.02 +/- 0.001

[Fri Jun 15 05:26:48 2012] Off-axis axis estimate = 13.41'
[Fri Jun 15 06:32:23 2012] Using EEF radius (= 13.13 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 06:32:24 2012] Initial guess for spatial extent in simple fitting = 13.13"
[Fri Jun 15 06:32:24 2012] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.989
[Fri Jun 15 06:32:24 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 13.13"
[Fri Jun 15 07:13:16 2012] fullrun_mos2_xmm0018540101_pi300-10000_cl_pass0_src5.ximg exists
[Fri Jun 15 07:13:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018540101_pi300-10000_cl_pass0_src5.csv
[Fri Jun 15 07:13:16 2012] fullrun_mos2_xmm0018540101_pi300-10000_cl_pass0_src5_1.ximg exists
[Fri Jun 15 07:13:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018540101_pi300-10000_cl_pass0_src5.csv
[Fri Jun 15 07:13:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018540101_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018540101_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 07:13:16 2012] fullrun_mos2_xmm0018540101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Fri Jun 15 07:13:16 2012] fullrun_mos2_xmm0018540101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Fri Jun 15 07:13:16 2012] Fit fullrun_mos2_xmm0018540101_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Fri Jun 15 07:13:32 2012] Spatial fit model total counts = 585.970000, observed total counts = 557.000000
[Fri Jun 15 07:13:32 2012] Offset between fit and detection position for source 29 = 0.139907 pixels
[Fri Jun 15 07:13:32 2012] 590.665000 total counts/ 294.585000 bgd. counts: snr = 17.250582
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 0.139907 pixels
  Position = (327.2, 115.7) = 0 59 21.26 -72 23 19.2
  Extent = 5.6 (5.1-6.3)", rotation angle = 0
  Source counts = 296.1 +/- 24.3
  Background counts = 294.6
  Rate = 0.01 +/- 0.0009
[Fri Jun 15 07:13:32 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 07:13:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 07:13:32 2012] Assessing source extent using major axis lower bound
[Fri Jun 15 07:13:32 2012] Source does appear to be extended
[Fri Jun 15 07:13:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 08:14:37 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun 15 08:14:37 2012] Initial guess for spatial extent in simple fitting = 5.63"
[Fri Jun 15 08:14:37 2012] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.932
[Fri Jun 15 08:14:37 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 5.63"
[Fri Jun 15 08:53:36 2012] fullrun_mos2_xmm0018540101_pi300-10000_cl_pass1_src5.ximg exists
[Fri Jun 15 08:53:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018540101_pi300-10000_cl_pass1_src5.csv
[Fri Jun 15 08:53:36 2012] fullrun_mos2_xmm0018540101_pi300-10000_cl_pass1_src5_1.ximg exists
[Fri Jun 15 08:53:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018540101_pi300-10000_cl_pass1_src5.csv
[Fri Jun 15 08:53:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018540101_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018540101_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 08:53:37 2012] fullrun_mos2_xmm0018540101_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Fri Jun 15 08:53:37 2012] fullrun_mos2_xmm0018540101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Fri Jun 15 08:53:37 2012] Fit fullrun_mos2_xmm0018540101_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Fri Jun 15 08:53:46 2012] Spatial fit model total counts = 523.475000, observed total counts = 508.000000
[Fri Jun 15 08:53:46 2012] Offset between fit and detection position for source 29 = 0.007477 pixels
[Fri Jun 15 08:53:46 2012] 527.579000 total counts/ 233.483000 bgd. counts: snr = 19.246931
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 0.007477 pixels
  Position = (327.2, 115.7) = 0 59 21.27 -72 23 19.3
  Extent = 5.7 (5.1-6.3)", rotation angle = 0
  Source counts = 294.1 +/- 23.0
  Background counts = 233.5
  Rate = 0.01 +/- 0.0009
[Fri Jun 15 08:53:47 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 08:53:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 08:53:47 2012] Assessing source extent using major axis lower bound
[Fri Jun 15 08:53:47 2012] Source does appear to be extended
[Fri Jun 15 08:53:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 10:02:57 2012] XMMSAS src. selection expression = ellipse(28413.800420, 10015.715000, 339.220210, 339.220210, 0.000000, X, Y)
[Fri Jun 15 10:02:57 2012] Writing source region out to fullrun_mos2_xmm0018540101_pi300-10000_pass1_cl_src29_src.reg
[Fri Jun 15 10:02:57 2012] Extracting stamp from image fullrun_mos2_xmm0018540101_pi300-10000_cl_sm2.00.img.gz, (308, 96) - (347, 135)
[Fri Jun 15 10:02:57 2012] XMMSAS bgd. selection expression = annulus(28413.800420, 10015.715000, 565.367016, 1130.734033, X, Y) && !ellipse(29048.409200, 10947.157600, 870.552025, 870.552025, 0.000000, X, Y)
[Fri Jun 15 10:02:57 2012] Writing fullrun_mos2_xmm0018540101_pi300-10000_pass1_cl_src29.gif
[Fri Jun 15 10:04:36 2012] Mean detx,y = (-12602.29, -9917.37) 
[Fri Jun 15 10:04:37 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 15 10:04:45 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 15 10:04:45 2012] Setting source spectrum file to fullrun_mos2_xmm0018540101_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Fri Jun 15 10:04:45 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0018540101_pi300-10000_pass1_cl_src29_bgd.pi.gz
[Fri Jun 15 10:35:04 2012] Updating aperture counts using extracted products
[Fri Jun 15 10:35:04 2012] Error reading totcts from fullrun_mos2_xmm0018540101_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Fri Jun 15 10:35:05 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 15 10:35:05 2012] Using photon index=1.80, rate=0.0109, arf fullrun_mos2_xmm0018540101_pi300-10000_pass1_cl_src29.arf
[Fri Jun 15 10:35:05 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 15 10:35:05 2012] Updating source flux to 3.7e-13