[Fri Jun 15 05:26:48 2012] Detection parameters:
  Position = (274.4, 158.0) = 1 0 11.80 -72 20 15.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 96.1 +/- 13.5
  Background counts = 15.4
  Rate = 0.007 +/- 0.001

[Fri Jun 15 05:26:48 2012] Off-axis axis estimate = 10.33'
[Fri Jun 15 06:32:24 2012] Using EEF radius (= 11.59 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 06:32:24 2012] Initial guess for spatial extent in simple fitting = 11.59"
[Fri Jun 15 06:32:24 2012] source mask rpix=2.7, npix_max = 40, mask sum = 42, frac = 1.048
[Fri Jun 15 06:32:24 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 11.59"
[Fri Jun 15 07:13:16 2012] fullrun_mos2_xmm0018540101_pi300-10000_cl_pass0_src12.ximg exists
[Fri Jun 15 07:13:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018540101_pi300-10000_cl_pass0_src12.csv
[Fri Jun 15 07:13:16 2012] fullrun_mos2_xmm0018540101_pi300-10000_cl_pass0_src12_1.ximg exists
[Fri Jun 15 07:13:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018540101_pi300-10000_cl_pass0_src12.csv
[Fri Jun 15 07:13:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018540101_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018540101_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 07:13:17 2012] fullrun_mos2_xmm0018540101_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Fri Jun 15 07:13:17 2012] fullrun_mos2_xmm0018540101_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Fri Jun 15 07:13:17 2012] Fit fullrun_mos2_xmm0018540101_pi300-10000_cl_pass0_tfrozen_src12 appears to have run properly
[Fri Jun 15 07:13:32 2012] Spatial fit model total counts = 243.971000, observed total counts = 244.000000
[Fri Jun 15 07:13:32 2012] Offset between fit and detection position for source 27 = 0.250929 pixels
[Fri Jun 15 07:13:32 2012] 245.177700 total counts/ 168.934000 bgd. counts: snr = 5.866046
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 0.250929 pixels
  Position = (274.2, 157.8) = 1 0 12.00 -72 20 16.0
  Extent = 7.2 (5.5-9.3)", rotation angle = 0
  Source counts = 76.2 +/- 15.7
  Background counts = 168.9
  Rate = 0.003 +/- 0.0006
[Fri Jun 15 07:13:32 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 07:13:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 07:13:32 2012] Assessing source extent using major axis lower bound
[Fri Jun 15 07:13:32 2012] Source does appear to be extended
[Fri Jun 15 07:13:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 08:14:37 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun 15 08:14:37 2012] Initial guess for spatial extent in simple fitting = 7.21"
[Fri Jun 15 08:14:37 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.859
[Fri Jun 15 08:14:37 2012] Giving source the simple spatial ID 12 for pass 1, mean size = 7.21"
[Fri Jun 15 08:53:36 2012] fullrun_mos2_xmm0018540101_pi300-10000_cl_pass1_src12.ximg exists
[Fri Jun 15 08:53:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018540101_pi300-10000_cl_pass1_src12.csv
[Fri Jun 15 08:53:36 2012] fullrun_mos2_xmm0018540101_pi300-10000_cl_pass1_src12_1.ximg exists
[Fri Jun 15 08:53:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018540101_pi300-10000_cl_pass1_src12.csv
[Fri Jun 15 08:53:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018540101_pi300-10000_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018540101_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 08:53:37 2012] fullrun_mos2_xmm0018540101_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Fri Jun 15 08:53:37 2012] fullrun_mos2_xmm0018540101_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Fri Jun 15 08:53:37 2012] Fit fullrun_mos2_xmm0018540101_pi300-10000_cl_pass1_tfrozen_src12 appears to have run properly
[Fri Jun 15 08:53:46 2012] Spatial fit model total counts = 243.888000, observed total counts = 244.000000
[Fri Jun 15 08:53:46 2012] Offset between fit and detection position for source 27 = 0.008729 pixels
[Fri Jun 15 08:53:46 2012] 245.088500 total counts/ 169.159000 bgd. counts: snr = 5.837985
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 0.008729 pixels
  Position = (274.2, 157.8) = 1 0 11.99 -72 20 16.0
  Extent = 7.2 (5.5-9.3)", rotation angle = 0
  Source counts = 75.9 +/- 15.7
  Background counts = 169.2
  Rate = 0.003 +/- 0.0006
[Fri Jun 15 08:53:47 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 08:53:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 08:53:47 2012] Assessing source extent using major axis lower bound
[Fri Jun 15 08:53:47 2012] Source does appear to be extended
[Fri Jun 15 08:53:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 10:02:57 2012] XMMSAS src. selection expression = ellipse(23803.710420, 13681.465520, 431.089812, 431.089812, 0.000000, X, Y)
[Fri Jun 15 10:02:57 2012] Writing source region out to fullrun_mos2_xmm0018540101_pi300-10000_pass1_cl_src27_src.reg
[Fri Jun 15 10:02:57 2012] Extracting stamp from image fullrun_mos2_xmm0018540101_pi300-10000_cl_sm2.00.img.gz, (249, 133) - (299, 183)
[Fri Jun 15 10:02:57 2012] XMMSAS bgd. selection expression = annulus(23803.710420, 13681.465520, 718.483021, 1436.966041, X, Y)
[Fri Jun 15 10:02:57 2012] Writing fullrun_mos2_xmm0018540101_pi300-10000_pass1_cl_src27.gif
[Fri Jun 15 10:06:14 2012] Mean detx,y = (-6831.07, -11105.11) 
[Fri Jun 15 10:06:15 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 15 10:06:22 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 15 10:06:22 2012] Setting source spectrum file to fullrun_mos2_xmm0018540101_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Fri Jun 15 10:06:22 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0018540101_pi300-10000_pass1_cl_src27_bgd.pi.gz
[Fri Jun 15 10:32:29 2012] Not generating rmf since there are only 75 counts
[Fri Jun 15 10:32:29 2012] rmf not generated due to insufficient counts
[Fri Jun 15 10:35:04 2012] Updating aperture counts using extracted products
[Fri Jun 15 10:35:04 2012] Error reading totcts from fullrun_mos2_xmm0018540101_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Fri Jun 15 10:35:05 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 15 10:35:05 2012] Using photon index=1.80, rate=0.00282, arf fullrun_mos2_xmm0018540101_pi300-10000_pass1_cl_src27.arf
[Fri Jun 15 10:35:05 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 15 10:35:05 2012] Updating source flux to 6.9e-14
[Fri Jun 15 10:36:23 2012] Source 27 has fewer than 100.000000 counts, skipping spectral fitting