[Fri Jun 15 05:26:48 2012] Detection parameters:
  Position = (316.9, 283.8) = 0 59 31.31 -72 11 2.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 62.8 +/- 12.0
  Background counts = 19.8
  Rate = 0.003 +/- 0.0006

[Fri Jun 15 05:26:48 2012] Off-axis axis estimate = 1.71'
[Fri Jun 15 06:32:24 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 06:32:24 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Fri Jun 15 06:32:24 2012] source mask rpix=1.7, npix_max = 18, mask sum = 13, frac = 0.688
[Fri Jun 15 06:32:24 2012] Giving source the simple spatial ID 20 for pass 0, mean size = 7.28"
[Fri Jun 15 07:13:16 2012] fullrun_mos2_xmm0018540101_pi300-10000_cl_pass0_src20.ximg exists
[Fri Jun 15 07:13:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018540101_pi300-10000_cl_pass0_src20.csv
[Fri Jun 15 07:13:16 2012] fullrun_mos2_xmm0018540101_pi300-10000_cl_pass0_src20_1.ximg exists
[Fri Jun 15 07:13:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018540101_pi300-10000_cl_pass0_src20.csv
[Fri Jun 15 07:13:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018540101_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018540101_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 07:13:17 2012] fullrun_mos2_xmm0018540101_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Fri Jun 15 07:13:17 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0018540101_pi300-10000_cl_pass0_tfrozen_src20.csv
[Fri Jun 15 07:13:17 2012] fullrun_mos2_xmm0018540101_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Fri Jun 15 07:13:17 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0018540101_pi300-10000_cl_pass0_tfrozen_src20.csv
[Fri Jun 15 07:13:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018540101_pi300-10000_cl_pass0_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018540101_pi300-10000_cl_pass0_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 07:13:32 2012] Warning, spatial fit 20 centroid is now closest to src. 19
[Fri Jun 15 07:13:32 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 07:13:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 07:13:32 2012] Assessing source extent using major
[Fri Jun 15 07:13:32 2012] Source does appear to be extended
[Fri Jun 15 07:13:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 08:14:37 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 08:14:37 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Fri Jun 15 08:14:37 2012] source mask rpix=1.7, npix_max = 18, mask sum = 13, frac = 0.688
[Fri Jun 15 08:14:37 2012] Giving source the simple spatial ID 20 for pass 1, mean size = 7.28"
[Fri Jun 15 08:53:36 2012] fullrun_mos2_xmm0018540101_pi300-10000_cl_pass1_src20.ximg exists
[Fri Jun 15 08:53:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018540101_pi300-10000_cl_pass1_src20.csv
[Fri Jun 15 08:53:36 2012] fullrun_mos2_xmm0018540101_pi300-10000_cl_pass1_src20_1.ximg exists
[Fri Jun 15 08:53:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018540101_pi300-10000_cl_pass1_src20.csv
[Fri Jun 15 08:53:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018540101_pi300-10000_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018540101_pi300-10000_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 08:53:37 2012] fullrun_mos2_xmm0018540101_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Fri Jun 15 08:53:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018540101_pi300-10000_cl_pass1_tfrozen_src20.csv
[Fri Jun 15 08:53:37 2012] fullrun_mos2_xmm0018540101_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Fri Jun 15 08:53:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018540101_pi300-10000_cl_pass1_tfrozen_src20.csv
[Fri Jun 15 08:53:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018540101_pi300-10000_cl_pass1_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018540101_pi300-10000_cl_pass1_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 08:53:47 2012] Warning, spatial fit 20 centroid is now closest to src. 19
[Fri Jun 15 08:53:47 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 08:53:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 08:53:47 2012] Assessing source extent using major
[Fri Jun 15 08:53:47 2012] Source does appear to be extended
[Fri Jun 15 08:53:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 10:02:58 2012] XMMSAS src. selection expression = ellipse(27519.906433, 24640.957275, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 15 10:02:58 2012] Writing source region out to fullrun_mos2_xmm0018540101_pi300-10000_pass1_cl_src20_src.reg
[Fri Jun 15 10:02:58 2012] Extracting stamp from image fullrun_mos2_xmm0018540101_pi300-10000_cl_sm2.00.img.gz, (279, 246) - (354, 321)
[Fri Jun 15 10:02:58 2012] XMMSAS bgd. selection expression = annulus(27519.906433, 24640.957275, 1087.500000, 2175.000000, X, Y) && !ellipse(28029.174400, 26070.269400, 918.360026, 918.360026, 0.000000, X, Y) && !ellipse(27391.036621, 25374.897644, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29012.465731, 25764.695394, 735.148821, 735.148821, 0.000000, X, Y) && !ellipse(26841.732000, 26198.200000, 1112.128032, 1112.128032, 0.000000, X, Y) && !ellipse(28046.162445, 25053.904602, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28874.473175, 26526.949371, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29930.048619, 25258.401851, 1227.544035, 948.592941, -0.000000, X, Y)
[Fri Jun 15 10:02:58 2012] Writing fullrun_mos2_xmm0018540101_pi300-10000_pass1_cl_src20.gif
[Fri Jun 15 10:08:02 2012] Mean detx,y = (-669.52, -1117.26) 
[Fri Jun 15 10:08:04 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 15 10:08:13 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 15 10:08:13 2012] Setting source spectrum file to fullrun_mos2_xmm0018540101_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Fri Jun 15 10:08:13 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0018540101_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Fri Jun 15 10:33:29 2012] Not generating rmf since there are only 62 counts
[Fri Jun 15 10:33:29 2012] rmf not generated due to insufficient counts
[Fri Jun 15 10:35:05 2012] Updating aperture counts using extracted products
[Fri Jun 15 10:35:05 2012] Error reading totcts from fullrun_mos2_xmm0018540101_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Fri Jun 15 10:35:05 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 15 10:35:05 2012] Using photon index=1.80, rate=0.00291, arf fullrun_mos2_xmm0018540101_pi300-10000_pass1_cl_src20.arf
[Fri Jun 15 10:35:05 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 15 10:35:05 2012] Updating source flux to 3.3e-14
[Fri Jun 15 10:36:23 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting