[Fri Jun 15 05:26:48 2012] Detection parameters:
  Position = (315.4, 292.2) = 0 59 32.72 -72 10 33.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 288.6 +/- 22.0
  Background counts = 19.6
  Rate = 0.01 +/- 0.0009

[Fri Jun 15 05:26:48 2012] Off-axis axis estimate = 1.31'
[Fri Jun 15 06:32:24 2012] Using EEF radius (= 7.08 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 06:32:24 2012] Initial guess for spatial extent in simple fitting = 7.08"
[Fri Jun 15 06:32:24 2012] source mask rpix=1.6, npix_max = 18, mask sum = 19, frac = 1.049
[Fri Jun 15 06:32:24 2012] Giving source the simple spatial ID 8 for pass 0, mean size = 7.08"
[Fri Jun 15 07:13:16 2012] fullrun_mos2_xmm0018540101_pi300-10000_cl_pass0_src8.ximg exists
[Fri Jun 15 07:13:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018540101_pi300-10000_cl_pass0_src8.csv
[Fri Jun 15 07:13:16 2012] fullrun_mos2_xmm0018540101_pi300-10000_cl_pass0_src8_1.ximg exists
[Fri Jun 15 07:13:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018540101_pi300-10000_cl_pass0_src8.csv
[Fri Jun 15 07:13:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018540101_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018540101_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 07:13:17 2012] fullrun_mos2_xmm0018540101_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Fri Jun 15 07:13:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018540101_pi300-10000_cl_pass0_tfrozen_src8.csv
[Fri Jun 15 07:13:17 2012] fullrun_mos2_xmm0018540101_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Fri Jun 15 07:13:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018540101_pi300-10000_cl_pass0_tfrozen_src8.csv
[Fri Jun 15 07:13:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018540101_pi300-10000_cl_pass0_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018540101_pi300-10000_cl_pass0_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 07:13:32 2012] Spatial fit model total counts = 1192.090000, observed total counts = 1079.000000
[Fri Jun 15 07:13:32 2012] Poor agreement between spatial fit and data for source 19
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jun 15 07:13:32 2012] Source 19 is offset by 6.093386 and 1.526548 pixels which is larger than
2 X fitted extent = 0.837048 x 0.837048, not incorporating fit results
[Fri Jun 15 07:13:32 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 07:13:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 07:13:32 2012] Assessing source extent using major
[Fri Jun 15 07:13:32 2012] Source does appear to be extended
[Fri Jun 15 07:13:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 08:14:37 2012] Using EEF radius (= 7.08 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 08:14:37 2012] Initial guess for spatial extent in simple fitting = 7.08"
[Fri Jun 15 08:14:37 2012] source mask rpix=1.6, npix_max = 18, mask sum = 19, frac = 1.049
[Fri Jun 15 08:14:37 2012] Giving source the simple spatial ID 8 for pass 1, mean size = 7.08"
[Fri Jun 15 08:53:36 2012] fullrun_mos2_xmm0018540101_pi300-10000_cl_pass1_src8.ximg exists
[Fri Jun 15 08:53:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018540101_pi300-10000_cl_pass1_src8.csv
[Fri Jun 15 08:53:36 2012] fullrun_mos2_xmm0018540101_pi300-10000_cl_pass1_src8_1.ximg exists
[Fri Jun 15 08:53:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018540101_pi300-10000_cl_pass1_src8.csv
[Fri Jun 15 08:53:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018540101_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018540101_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 08:53:37 2012] fullrun_mos2_xmm0018540101_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Fri Jun 15 08:53:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018540101_pi300-10000_cl_pass1_tfrozen_src8.csv
[Fri Jun 15 08:53:37 2012] fullrun_mos2_xmm0018540101_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Fri Jun 15 08:53:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018540101_pi300-10000_cl_pass1_tfrozen_src8.csv
[Fri Jun 15 08:53:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018540101_pi300-10000_cl_pass1_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018540101_pi300-10000_cl_pass1_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 08:53:46 2012] Spatial fit model total counts = 1212.770000, observed total counts = 1079.000000
[Fri Jun 15 08:53:46 2012] Poor agreement between spatial fit and data for source 19
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jun 15 08:53:47 2012] Spatial fit model total counts = 648.867000, observed total counts = 482.000000
[Fri Jun 15 08:53:47 2012] Poor agreement between spatial fit and data for source 19
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jun 15 08:53:47 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 08:53:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 08:53:47 2012] Assessing source extent using major
[Fri Jun 15 08:53:47 2012] Source does appear to be extended
[Fri Jun 15 08:53:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 10:02:57 2012] XMMSAS src. selection expression = ellipse(27391.036621, 25374.897644, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 15 10:02:57 2012] Writing source region out to fullrun_mos2_xmm0018540101_pi300-10000_pass1_cl_src19_src.reg
[Fri Jun 15 10:02:57 2012] Extracting stamp from image fullrun_mos2_xmm0018540101_pi300-10000_cl_sm2.00.img.gz, (278, 255) - (353, 330)
[Fri Jun 15 10:02:57 2012] XMMSAS bgd. selection expression = annulus(27391.036621, 25374.897644, 1087.500000, 2175.000000, X, Y) && !ellipse(28029.174400, 26070.269400, 918.360026, 918.360026, 0.000000, X, Y) && !ellipse(29012.465731, 25764.695394, 735.148821, 735.148821, 0.000000, X, Y) && !ellipse(26841.732000, 26198.200000, 1112.128032, 1112.128032, 0.000000, X, Y) && !ellipse(28046.162445, 25053.904602, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27519.906433, 24640.957275, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28874.473175, 26526.949371, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29930.048619, 25258.401851, 1227.544035, 948.592941, -0.000000, X, Y)
[Fri Jun 15 10:02:57 2012] Writing fullrun_mos2_xmm0018540101_pi300-10000_pass1_cl_src19.gif
[Fri Jun 15 10:05:22 2012] Mean detx,y = (-108.37, -783.81) 
[Fri Jun 15 10:05:23 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 15 10:05:32 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 15 10:05:32 2012] Setting source spectrum file to fullrun_mos2_xmm0018540101_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Fri Jun 15 10:05:32 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0018540101_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Fri Jun 15 10:24:36 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jun 15 10:24:36 2012] rmf not generated due to insufficient counts
[Fri Jun 15 10:35:04 2012] Updating aperture counts using extracted products
[Fri Jun 15 10:35:04 2012] Error reading totcts from fullrun_mos2_xmm0018540101_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Fri Jun 15 10:35:05 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 15 10:35:05 2012] Using photon index=1.80, rate=0.0118, arf fullrun_mos2_xmm0018540101_pi300-10000_pass1_cl_src19.arf
[Fri Jun 15 10:35:05 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 15 10:35:05 2012] Updating source flux to 1.3e-13
[Fri Jun 15 10:36:23 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting