[Fri Jun 15 05:26:48 2012] Detection parameters:
  Position = (322.5, 300.8) = 0 59 26.04 -72 9 54.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 414.3 +/- 25.7
  Background counts = 20.8
  Rate = 0.02 +/- 0.001

[Fri Jun 15 05:26:48 2012] Off-axis axis estimate = 1.75'
[Fri Jun 15 06:32:24 2012] Using EEF radius (= 7.30 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 06:32:24 2012] Initial guess for spatial extent in simple fitting = 7.30"
[Fri Jun 15 06:32:24 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.053
[Fri Jun 15 06:32:24 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 7.30"
[Fri Jun 15 07:13:16 2012] fullrun_mos2_xmm0018540101_pi300-10000_cl_pass0_src6.ximg exists
[Fri Jun 15 07:13:16 2012] fullrun_mos2_xmm0018540101_pi300-10000_cl_pass0_src6_1.ximg exists
[Fri Jun 15 07:13:16 2012] Fit fullrun_mos2_xmm0018540101_pi300-10000_cl_pass0_src6 appears to have run properly
[Fri Jun 15 07:13:16 2012] fullrun_mos2_xmm0018540101_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Fri Jun 15 07:13:16 2012] fullrun_mos2_xmm0018540101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Fri Jun 15 07:13:17 2012] Fit fullrun_mos2_xmm0018540101_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Fri Jun 15 07:13:32 2012] Spatial fit model total counts = 1430.020000, observed total counts = 1326.000000
[Fri Jun 15 07:13:32 2012] Offset between fit and detection position for source 15 = 0.672213 pixels
[Fri Jun 15 07:13:32 2012] 1400.568000 total counts/ 1072.620000 bgd. counts: snr = 10.013411
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 0.672213 pixels
  Position = (322.7, 300.2) = 0 59 25.79 -72 9 56.6
  Extent = 11.5 (9.2-14.6)", rotation angle = 0
  Source counts = 327.9 +/- 37.4
  Background counts = 1072.6
  Rate = 0.01 +/- 0.001
[Fri Jun 15 07:13:32 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 07:13:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 07:13:32 2012] Assessing source extent using major axis lower bound
[Fri Jun 15 07:13:32 2012] Source does appear to be extended
[Fri Jun 15 07:13:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 08:14:37 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun 15 08:14:37 2012] Initial guess for spatial extent in simple fitting = 11.48"
[Fri Jun 15 08:14:37 2012] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.913
[Fri Jun 15 08:14:37 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 11.48"
[Fri Jun 15 08:53:36 2012] fullrun_mos2_xmm0018540101_pi300-10000_cl_pass1_src6.ximg exists
[Fri Jun 15 08:53:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018540101_pi300-10000_cl_pass1_src6.csv
[Fri Jun 15 08:53:36 2012] fullrun_mos2_xmm0018540101_pi300-10000_cl_pass1_src6_1.ximg exists
[Fri Jun 15 08:53:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018540101_pi300-10000_cl_pass1_src6.csv
[Fri Jun 15 08:53:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018540101_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018540101_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 08:53:37 2012] fullrun_mos2_xmm0018540101_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Fri Jun 15 08:53:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018540101_pi300-10000_cl_pass1_tfrozen_src6.csv
[Fri Jun 15 08:53:37 2012] fullrun_mos2_xmm0018540101_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Fri Jun 15 08:53:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018540101_pi300-10000_cl_pass1_tfrozen_src6.csv
[Fri Jun 15 08:53:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018540101_pi300-10000_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018540101_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 08:53:46 2012] Warning, spatial fit 6 centroid is now closest to src. 13
[Fri Jun 15 08:53:47 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 08:53:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 08:53:47 2012] Assessing source extent using major axis lower bound
[Fri Jun 15 08:53:47 2012] Source does appear to be extended
[Fri Jun 15 08:53:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 10:02:57 2012] XMMSAS src. selection expression = ellipse(28029.174400, 26070.269400, 688.770020, 688.770020, 0.000000, X, Y)
[Fri Jun 15 10:02:57 2012] Writing source region out to fullrun_mos2_xmm0018540101_pi300-10000_pass1_cl_src15_src.reg
[Fri Jun 15 10:02:57 2012] Extracting stamp from image fullrun_mos2_xmm0018540101_pi300-10000_cl_sm2.00.img.gz, (283, 261) - (362, 340)
[Fri Jun 15 10:02:57 2012] XMMSAS bgd. selection expression = annulus(28029.174400, 26070.269400, 1147.950033, 2295.900066, X, Y) && !ellipse(27391.036621, 25374.897644, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29012.465731, 25764.695394, 735.148821, 735.148821, 0.000000, X, Y) && !ellipse(26841.732000, 26198.200000, 1112.128032, 1112.128032, 0.000000, X, Y) && !ellipse(28046.162445, 25053.904602, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27519.906433, 24640.957275, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28874.473175, 26526.949371, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29930.048619, 25258.401851, 1227.544035, 948.592941, -0.000000, X, Y)
[Fri Jun 15 10:02:57 2012] Writing fullrun_mos2_xmm0018540101_pi300-10000_pass1_cl_src15.gif
[Fri Jun 15 10:04:49 2012] Mean detx,y = (-40.27, 62.65) 
[Fri Jun 15 10:04:50 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 15 10:04:59 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 15 10:04:59 2012] Setting source spectrum file to fullrun_mos2_xmm0018540101_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Fri Jun 15 10:04:59 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0018540101_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Fri Jun 15 10:35:04 2012] Updating aperture counts using extracted products
[Fri Jun 15 10:35:04 2012] Error reading totcts from fullrun_mos2_xmm0018540101_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Fri Jun 15 10:35:05 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 15 10:35:05 2012] Using photon index=1.80, rate=0.0122, arf fullrun_mos2_xmm0018540101_pi300-10000_pass1_cl_src15.arf
[Fri Jun 15 10:35:05 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 15 10:35:05 2012] Updating source flux to 1.4e-13