[Fri Jun 15 05:26:48 2012] Detection parameters:
  Position = (332.4, 305.5) = 0 59 16.59 -72 9 35.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 45.2 +/- 10.5
  Background counts = 20.9
  Rate = 0.002 +/- 0.0004

[Fri Jun 15 05:26:48 2012] Off-axis axis estimate = 2.52'
[Fri Jun 15 06:32:24 2012] Using EEF radius (= 7.69 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 06:32:24 2012] Initial guess for spatial extent in simple fitting = 7.69"
[Fri Jun 15 06:32:24 2012] source mask rpix=1.8, npix_max = 20, mask sum = 22, frac = 1.070
[Fri Jun 15 06:32:24 2012] Giving source the simple spatial ID 26 for pass 0, mean size = 7.69"
[Fri Jun 15 07:13:16 2012] fullrun_mos2_xmm0018540101_pi300-10000_cl_pass0_src26.ximg exists
[Fri Jun 15 07:13:16 2012] fullrun_mos2_xmm0018540101_pi300-10000_cl_pass0_src26_1.ximg exists
[Fri Jun 15 07:13:16 2012] Fit fullrun_mos2_xmm0018540101_pi300-10000_cl_pass0_src26 appears to have run properly
[Fri Jun 15 07:13:17 2012] fullrun_mos2_xmm0018540101_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Fri Jun 15 07:13:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018540101_pi300-10000_cl_pass0_tfrozen_src26.csv
[Fri Jun 15 07:13:17 2012] fullrun_mos2_xmm0018540101_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Fri Jun 15 07:13:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018540101_pi300-10000_cl_pass0_tfrozen_src26.csv
[Fri Jun 15 07:13:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018540101_pi300-10000_cl_pass0_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018540101_pi300-10000_cl_pass0_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 07:13:32 2012] Source 13 is offset by 7.516956 and 4.920935 pixels which is larger than
2 X fitted extent = 4.070281 x 7.069012, not incorporating fit results
[Fri Jun 15 07:13:32 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 07:13:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 07:13:32 2012] Assessing source extent using major
[Fri Jun 15 07:13:32 2012] Source does appear to be extended
[Fri Jun 15 07:13:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 08:14:37 2012] Using EEF radius (= 7.69 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 08:14:37 2012] Initial guess for spatial extent in simple fitting = 7.69"
[Fri Jun 15 08:14:37 2012] source mask rpix=1.8, npix_max = 20, mask sum = 22, frac = 1.070
[Fri Jun 15 08:14:37 2012] Giving source the simple spatial ID 25 for pass 1, mean size = 7.69"
[Fri Jun 15 08:53:36 2012] fullrun_mos2_xmm0018540101_pi300-10000_cl_pass1_src25.ximg exists
[Fri Jun 15 08:53:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018540101_pi300-10000_cl_pass1_src25.csv
[Fri Jun 15 08:53:36 2012] fullrun_mos2_xmm0018540101_pi300-10000_cl_pass1_src25_1.ximg exists
[Fri Jun 15 08:53:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018540101_pi300-10000_cl_pass1_src25.csv
[Fri Jun 15 08:53:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018540101_pi300-10000_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018540101_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 08:53:37 2012] fullrun_mos2_xmm0018540101_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Fri Jun 15 08:53:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018540101_pi300-10000_cl_pass1_tfrozen_src25.csv
[Fri Jun 15 08:53:37 2012] fullrun_mos2_xmm0018540101_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Fri Jun 15 08:53:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018540101_pi300-10000_cl_pass1_tfrozen_src25.csv
[Fri Jun 15 08:53:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018540101_pi300-10000_cl_pass1_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018540101_pi300-10000_cl_pass1_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 08:53:46 2012] Source 13 is offset by -0.107895 and -6.090927 pixels which is larger than
2 X fitted extent = 1.319480 x 1.319480, not incorporating fit results
[Fri Jun 15 08:53:47 2012] Spatial fit model total counts = 739.929000, observed total counts = 662.000000
[Fri Jun 15 08:53:47 2012] Poor agreement between spatial fit and data for source 13
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jun 15 08:53:47 2012] Source 13 is offset by -2.594239 and 9.254522 pixels which is larger than
2 X fitted extent = 2.470556 x 6.923081, not incorporating fit results
[Fri Jun 15 08:53:47 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 08:53:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 08:53:47 2012] Assessing source extent using major
[Fri Jun 15 08:53:47 2012] Source does appear to be extended
[Fri Jun 15 08:53:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 10:02:58 2012] XMMSAS src. selection expression = ellipse(28874.473175, 26526.949371, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 15 10:02:58 2012] Writing source region out to fullrun_mos2_xmm0018540101_pi300-10000_pass1_cl_src13_src.reg
[Fri Jun 15 10:02:58 2012] Extracting stamp from image fullrun_mos2_xmm0018540101_pi300-10000_cl_sm2.00.img.gz, (295, 268) - (370, 343)
[Fri Jun 15 10:02:58 2012] XMMSAS bgd. selection expression = annulus(28874.473175, 26526.949371, 1087.500000, 2175.000000, X, Y) && !ellipse(28029.174400, 26070.269400, 918.360026, 918.360026, 0.000000, X, Y) && !ellipse(27391.036621, 25374.897644, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29012.465731, 25764.695394, 735.148821, 735.148821, 0.000000, X, Y) && !ellipse(26841.732000, 26198.200000, 1112.128032, 1112.128032, 0.000000, X, Y) && !ellipse(28046.162445, 25053.904602, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27519.906433, 24640.957275, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29930.048619, 25258.401851, 1227.544035, 948.592941, -0.000000, X, Y)
[Fri Jun 15 10:02:58 2012] Writing fullrun_mos2_xmm0018540101_pi300-10000_pass1_cl_src13.gif
[Fri Jun 15 10:08:58 2012] Mean detx,y = (-242.30, 836.04) 
[Fri Jun 15 10:09:00 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 15 10:09:09 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 15 10:09:09 2012] Setting source spectrum file to fullrun_mos2_xmm0018540101_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Fri Jun 15 10:09:09 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0018540101_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Fri Jun 15 10:33:51 2012] Not generating rmf since there are only 45 counts
[Fri Jun 15 10:33:51 2012] rmf not generated due to insufficient counts
[Fri Jun 15 10:35:05 2012] Updating aperture counts using extracted products
[Fri Jun 15 10:35:05 2012] Error reading totcts from fullrun_mos2_xmm0018540101_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Fri Jun 15 10:35:05 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 15 10:35:05 2012] Using photon index=1.80, rate=0.00189, arf fullrun_mos2_xmm0018540101_pi300-10000_pass1_cl_src13.arf
[Fri Jun 15 10:35:05 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 15 10:35:05 2012] Updating source flux to 2e-14
[Fri Jun 15 10:36:23 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting