[Fri Jun 15 05:26:47 2012] Detection parameters:
  Position = (437.8, 166.7) = 0 57 35.68 -72 19 35.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 768.0 +/- 32.8
  Background counts = 16.2
  Rate = 0.03 +/- 0.001

[Fri Jun 15 05:26:48 2012] Off-axis axis estimate = 13.90'
[Fri Jun 15 06:32:23 2012] Using EEF radius (= 13.38 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 06:32:23 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun 15 06:32:23 2012] Initial guess for spatial extent in simple fitting = 13.38"
[Fri Jun 15 06:32:23 2012] source mask rpix=3.1, npix_max = 51, mask sum = 46, frac = 0.899
[Fri Jun 15 06:32:23 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 13.38"
[Fri Jun 15 07:13:16 2012] fullrun_mos2_xmm0018540101_pi300-10000_cl_pass0_src1.ximg exists
[Fri Jun 15 07:13:16 2012] fullrun_mos2_xmm0018540101_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Jun 15 07:13:16 2012] Fit fullrun_mos2_xmm0018540101_pi300-10000_cl_pass0_src1 appears to have run properly
[Fri Jun 15 07:13:16 2012] fullrun_mos2_xmm0018540101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Jun 15 07:13:16 2012] fullrun_mos2_xmm0018540101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Jun 15 07:13:16 2012] Fit fullrun_mos2_xmm0018540101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Jun 15 07:13:32 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 18.186150 pixels away
[Fri Jun 15 07:13:32 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 07:13:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 07:13:32 2012] Assessing source extent using major
[Fri Jun 15 07:13:32 2012] Source does appear to be extended
[Fri Jun 15 07:13:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 08:14:37 2012] Using EEF radius (= 13.38 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 08:14:37 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun 15 08:14:37 2012] Initial guess for spatial extent in simple fitting = 13.38"
[Fri Jun 15 08:14:37 2012] source mask rpix=3.1, npix_max = 51, mask sum = 46, frac = 0.899
[Fri Jun 15 08:14:37 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 13.38"
[Fri Jun 15 08:53:36 2012] fullrun_mos2_xmm0018540101_pi300-10000_cl_pass1_src1.ximg exists
[Fri Jun 15 08:53:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018540101_pi300-10000_cl_pass1_src1.csv
[Fri Jun 15 08:53:36 2012] fullrun_mos2_xmm0018540101_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Jun 15 08:53:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018540101_pi300-10000_cl_pass1_src1.csv
[Fri Jun 15 08:53:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018540101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018540101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 08:53:37 2012] fullrun_mos2_xmm0018540101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Jun 15 08:53:37 2012] fullrun_mos2_xmm0018540101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Jun 15 08:53:37 2012] Fit fullrun_mos2_xmm0018540101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Jun 15 08:53:46 2012] Spatial fit model total counts = 1037.570000, observed total counts = 1032.000000
[Fri Jun 15 08:53:46 2012] Offset between fit and detection position for source 1 = 0.374969 pixels
[Fri Jun 15 08:53:46 2012] 1039.182000 total counts/ 525.989000 bgd. counts: snr = 22.376512
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.374969 pixels
  Position = (437.4, 166.5) = 0 57 36.03 -72 19 35.3
  Extent = 5.1 (4.7-5.5)", rotation angle = 0
  Source counts = 513.2 +/- 32.2
  Background counts = 526.0
  Rate = 0.02 +/- 0.001
[Fri Jun 15 08:53:47 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 08:53:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 08:53:47 2012] Assessing source extent using major axis lower bound
[Fri Jun 15 08:53:47 2012] Source does appear to be extended
[Fri Jun 15 08:53:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 10:02:57 2012] XMMSAS src. selection expression = ellipse(38007.201420, 14441.137000, 303.103209, 303.103209, 0.000000, X, Y)
[Fri Jun 15 10:02:57 2012] Writing source region out to fullrun_mos2_xmm0018540101_pi300-10000_pass1_cl_src1_src.reg
[Fri Jun 15 10:02:57 2012] Extracting stamp from image fullrun_mos2_xmm0018540101_pi300-10000_cl_sm2.00.img.gz, (420, 149) - (455, 184)
[Fri Jun 15 10:02:57 2012] XMMSAS bgd. selection expression = annulus(38007.201420, 14441.137000, 505.172015, 1010.344029, X, Y)
[Fri Jun 15 10:02:57 2012] Writing fullrun_mos2_xmm0018540101_pi300-10000_pass1_cl_src1.gif
[Fri Jun 15 10:03:00 2012] Mean detx,y = (-15368.67, 285.69) 
[Fri Jun 15 10:03:01 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 15 10:03:09 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 15 10:03:09 2012] Setting source spectrum file to fullrun_mos2_xmm0018540101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jun 15 10:03:09 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0018540101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Jun 15 10:35:04 2012] Updating aperture counts using extracted products
[Fri Jun 15 10:35:04 2012] Error reading totcts from fullrun_mos2_xmm0018540101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jun 15 10:35:05 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 15 10:35:05 2012] Using photon index=1.80, rate=0.0191, arf fullrun_mos2_xmm0018540101_pi300-10000_pass1_cl_src1.arf
[Fri Jun 15 10:35:05 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 15 10:35:05 2012] Updating source flux to 6.3e-13
[Fri Jun 15 10:37:31 2012] Reading fit data from xmm0018540101/analysis//spectral/fullrun_mos2_xmm0018540101_pi300-10000_pass1_cl_src1_pl.csv
[Fri Jun 15 10:37:31 2012] Spectral fit parameter nH value = 1.47837e+22
[Fri Jun 15 10:37:31 2012] Spectral fit parameter PhoIndex value = 0.826841
[Fri Jun 15 10:37:31 2012] Failed to get F(0.3-8.0) from xmm0018540101/analysis//spectral/fullrun_mos2_xmm0018540101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Jun 15 10:37:31 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 15 10:37:31 2012] Using Nh = 1.5e+22, photon index=0.83, rate=0.0191, arf fullrun_mos2_xmm0018540101_pi300-10000_pass1_cl_src1.arf
[Fri Jun 15 10:37:31 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 15 10:37:31 2012] Updating source flux to 1.7e-12