[Fri Jun 15 05:26:31 2012] Detection parameters:
  Position = (241.5, 278.4) = 1 0 42.80 -72 11 32.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1142.2 +/- 40.8
  Background counts = 16.3
  Rate = 0.07 +/- 0.002

[Fri Jun 15 05:26:32 2012] Off-axis axis estimate = 4.38'
[Fri Jun 15 05:57:14 2012] Using EEF radius (= 8.62 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 05:57:14 2012] Initial guess for spatial extent in simple fitting = 8.62"
[Fri Jun 15 05:57:14 2012] source mask rpix=2.0, npix_max = 24, mask sum = 18, frac = 0.731
[Fri Jun 15 05:57:14 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 8.62"
[Fri Jun 15 06:32:23 2012] fullrun_mos1_xmm0018540101_pi300-10000_cl_pass0_src1.ximg exists
[Fri Jun 15 06:32:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018540101_pi300-10000_cl_pass0_src1.csv
[Fri Jun 15 06:32:23 2012] fullrun_mos1_xmm0018540101_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Jun 15 06:32:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018540101_pi300-10000_cl_pass0_src1.csv
[Fri Jun 15 06:32:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0018540101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0018540101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 06:32:23 2012] fullrun_mos1_xmm0018540101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Jun 15 06:32:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018540101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Fri Jun 15 06:32:23 2012] fullrun_mos1_xmm0018540101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Jun 15 06:32:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018540101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Fri Jun 15 06:32:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0018540101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0018540101_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 07:13:27 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 11.221797 pixels away
[Fri Jun 15 07:13:27 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 07:13:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 07:13:27 2012] Assessing source extent using major
[Fri Jun 15 07:13:27 2012] Source does appear to be extended
[Fri Jun 15 07:13:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 07:35:18 2012] Using EEF radius (= 8.62 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 07:35:18 2012] Initial guess for spatial extent in simple fitting = 8.62"
[Fri Jun 15 07:35:18 2012] source mask rpix=2.0, npix_max = 24, mask sum = 18, frac = 0.731
[Fri Jun 15 07:35:18 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 8.62"
[Fri Jun 15 08:14:37 2012] fullrun_mos1_xmm0018540101_pi300-10000_cl_pass1_src1.ximg exists
[Fri Jun 15 08:14:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018540101_pi300-10000_cl_pass1_src1.csv
[Fri Jun 15 08:14:37 2012] fullrun_mos1_xmm0018540101_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Jun 15 08:14:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018540101_pi300-10000_cl_pass1_src1.csv
[Fri Jun 15 08:14:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0018540101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0018540101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 08:14:37 2012] fullrun_mos1_xmm0018540101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Jun 15 08:14:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018540101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Fri Jun 15 08:14:37 2012] fullrun_mos1_xmm0018540101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Jun 15 08:14:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018540101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Fri Jun 15 08:14:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0018540101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0018540101_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 08:53:42 2012] Spatial fit model total counts = 1447.880000, observed total counts = 1180.000000
[Fri Jun 15 08:53:42 2012] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jun 15 08:53:42 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 08:53:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 08:53:42 2012] Assessing source extent using major
[Fri Jun 15 08:53:42 2012] Source does appear to be extended
[Fri Jun 15 08:53:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 09:28:30 2012] Counts = 1142.196045, rescaling region sizes by 2.000000
[Fri Jun 15 09:28:30 2012] XMMSAS src. selection expression = ellipse(20960.242371, 24170.775482, 1305.000000, 1305.000000, 0.000000, X, Y)
[Fri Jun 15 09:28:30 2012] Writing source region out to fullrun_mos1_xmm0018540101_pi300-10000_pass1_cl_src2_src.reg
[Fri Jun 15 09:28:30 2012] Extracting stamp from image fullrun_mos1_xmm0018540101_pi300-10000_cl_sm2.00.img.gz, (166, 203) - (316, 353)
[Fri Jun 15 09:28:30 2012] XMMSAS bgd. selection expression = annulus(20960.242371, 24170.775482, 4350.000000, 8700.000000, X, Y) && !ellipse(28136.702200, 25995.525200, 1427.104041, 1427.104041, 0.000000, X, Y) && !ellipse(17485.369232, 24370.056671, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27404.516000, 25370.290000, 1150.440033, 1150.440033, 0.000000, X, Y) && !ellipse(23432.413660, 32305.430200, 477.612014, 477.612014, 0.000000, X, Y) && !ellipse(28998.912000, 25813.036600, 1234.016036, 1176.648034, 231.880000, X, Y) && !ellipse(28901.429688, 25372.866547, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15872.214584, 32764.600861, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20318.832428, 20959.582596, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27678.231140, 26469.175934, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27041.626000, 26933.736000, 1151.744033, 1151.744033, 0.000000, X, Y) && !ellipse(27275.808000, 28595.258800, 447.670413, 447.670413, 0.000000, X, Y) && !ellipse(29931.851868, 25176.014709, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 15 09:28:30 2012] Writing fullrun_mos1_xmm0018540101_pi300-10000_pass1_cl_src2.gif
[Fri Jun 15 09:28:34 2012] Mean detx,y = (-6304.99, -3209.03) 
[Fri Jun 15 09:28:35 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 15 09:29:53 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 15 09:29:53 2012] Setting source spectrum file to fullrun_mos1_xmm0018540101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Jun 15 09:29:53 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0018540101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Fri Jun 15 09:34:50 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jun 15 09:34:50 2012] rmf not generated due to insufficient counts
[Fri Jun 15 10:35:02 2012] Updating aperture counts using extracted products
[Fri Jun 15 10:35:02 2012] Error reading totcts from fullrun_mos1_xmm0018540101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Jun 15 10:35:03 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 15 10:35:03 2012] Using photon index=1.80, rate=0.0676, arf fullrun_mos1_xmm0018540101_pi300-10000_pass1_cl_src2.arf
[Fri Jun 15 10:35:03 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 15 10:35:03 2012] Updating source flux to 9.8e-13
[Fri Jun 15 10:35:06 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Jun 15 10:36:23 2012] xmm0018540101/analysis//spectral/fullrun_mos1_xmm0018540101_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete