[Fri Jun 15 05:26:32 2012] Detection parameters:
  Position = (332.8, 292.2) = 0 59 16.27 -72 10 32.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 174.6 +/- 18.5
  Background counts = 18.7
  Rate = 0.007 +/- 0.0007

[Fri Jun 15 05:26:32 2012] Off-axis axis estimate = 2.53'
[Fri Jun 15 05:57:14 2012] Using EEF radius (= 7.69 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 05:57:14 2012] Initial guess for spatial extent in simple fitting = 7.69"
[Fri Jun 15 05:57:14 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.972
[Fri Jun 15 05:57:14 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 7.69"
[Fri Jun 15 06:32:23 2012] fullrun_mos1_xmm0018540101_pi300-10000_cl_pass0_src11.ximg exists
[Fri Jun 15 06:32:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018540101_pi300-10000_cl_pass0_src11.csv
[Fri Jun 15 06:32:23 2012] fullrun_mos1_xmm0018540101_pi300-10000_cl_pass0_src11_1.ximg exists
[Fri Jun 15 06:32:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018540101_pi300-10000_cl_pass0_src11.csv
[Fri Jun 15 06:32:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0018540101_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0018540101_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 06:32:23 2012] fullrun_mos1_xmm0018540101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Fri Jun 15 06:32:23 2012] fullrun_mos1_xmm0018540101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Fri Jun 15 06:32:23 2012] Fit fullrun_mos1_xmm0018540101_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Fri Jun 15 07:13:27 2012] Warning, spatial fit 11 centroid is now closest to src. 18
[Fri Jun 15 07:13:27 2012] Source 19 is offset by -3.766165 and -3.116201 pixels which is larger than
2 X fitted extent = 3.133320 x 3.133320, not incorporating fit results
[Fri Jun 15 07:13:27 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 07:13:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 07:13:27 2012] Assessing source extent using major
[Fri Jun 15 07:13:27 2012] Source does appear to be extended
[Fri Jun 15 07:13:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 07:13:27 2012] Source is confused with source 16
[Fri Jun 15 07:35:18 2012] Using EEF radius (= 7.69 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 07:35:18 2012] Initial guess for spatial extent in simple fitting = 7.69"
[Fri Jun 15 07:35:18 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.972
[Fri Jun 15 07:35:18 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 7.69"
[Fri Jun 15 08:14:37 2012] fullrun_mos1_xmm0018540101_pi300-10000_cl_pass1_src11.ximg exists
[Fri Jun 15 08:14:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018540101_pi300-10000_cl_pass1_src11.csv
[Fri Jun 15 08:14:37 2012] fullrun_mos1_xmm0018540101_pi300-10000_cl_pass1_src11_1.ximg exists
[Fri Jun 15 08:14:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018540101_pi300-10000_cl_pass1_src11.csv
[Fri Jun 15 08:14:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0018540101_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0018540101_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 08:14:37 2012] fullrun_mos1_xmm0018540101_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Fri Jun 15 08:14:37 2012] fullrun_mos1_xmm0018540101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Fri Jun 15 08:14:37 2012] Fit fullrun_mos1_xmm0018540101_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Fri Jun 15 08:53:42 2012] Warning, spatial fit 11 centroid is now closest to src. 18
[Fri Jun 15 08:53:42 2012] Source 19 is offset by -4.100394 and -3.118752 pixels which is larger than
2 X fitted extent = 2.227554 x 4.680736, not incorporating fit results
[Fri Jun 15 08:53:42 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 08:53:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 08:53:42 2012] Assessing source extent using major
[Fri Jun 15 08:53:42 2012] Source does appear to be extended
[Fri Jun 15 08:53:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 09:28:30 2012] XMMSAS src. selection expression = ellipse(28901.429688, 25372.866547, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 15 09:28:30 2012] Writing source region out to fullrun_mos1_xmm0018540101_pi300-10000_pass1_cl_src19_src.reg
[Fri Jun 15 09:28:30 2012] Extracting stamp from image fullrun_mos1_xmm0018540101_pi300-10000_cl_sm2.00.img.gz, (295, 255) - (370, 330)
[Fri Jun 15 09:28:30 2012] XMMSAS bgd. selection expression = annulus(28901.429688, 25372.866547, 1087.500000, 2175.000000, X, Y) && !ellipse(28136.702200, 25995.525200, 1427.104041, 1427.104041, 0.000000, X, Y) && !ellipse(27404.516000, 25370.290000, 1150.440033, 1150.440033, 0.000000, X, Y) && !ellipse(28998.912000, 25813.036600, 1234.016036, 1176.648034, 231.880000, X, Y) && !ellipse(27678.231140, 26469.175934, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30120.386600, 23116.069400, 441.548013, 441.548013, 0.000000, X, Y) && !ellipse(27041.626000, 26933.736000, 1151.744033, 1151.744033, 0.000000, X, Y) && !ellipse(29931.851868, 25176.014709, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 15 09:28:30 2012] Writing fullrun_mos1_xmm0018540101_pi300-10000_pass1_cl_src19.gif
[Fri Jun 15 09:32:21 2012] Mean detx,y = (534.38, 846.64) 
[Fri Jun 15 09:32:22 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 15 09:32:27 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 15 09:32:27 2012] Setting source spectrum file to fullrun_mos1_xmm0018540101_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Fri Jun 15 09:32:27 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0018540101_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Fri Jun 15 10:01:22 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jun 15 10:01:22 2012] rmf not generated due to insufficient counts
[Fri Jun 15 10:35:02 2012] Updating aperture counts using extracted products
[Fri Jun 15 10:35:02 2012] Error reading totcts from fullrun_mos1_xmm0018540101_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Fri Jun 15 10:35:03 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 15 10:35:03 2012] Using photon index=1.80, rate=0.00654, arf fullrun_mos1_xmm0018540101_pi300-10000_pass1_cl_src19.arf
[Fri Jun 15 10:35:03 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 15 10:35:03 2012] Updating source flux to 6.5e-14
[Fri Jun 15 10:35:06 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting