[Mon Jun 24 16:07:13 2013] Detection parameters:
  Position = (238.8, 474.0) = 20 57 46.77 31 11 43.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 233.4 +/- 26.9
  Background counts = 186.3
  Rate = 0.02 +/- 0.003

[Mon Jun 24 16:07:20 2013] Off-axis axis estimate = 13.45'
[Mon Jun 24 16:08:44 2013] Using EEF radius (= 13.15 ")to estimate initial spatial extent for simple fitting
[Mon Jun 24 16:08:44 2013] Initial guess for spatial extent in simple fitting = 13.15"
[Mon Jun 24 16:08:44 2013] source mask rpix=3.0, npix_max = 49, mask sum = 48, frac = 0.967
[Mon Jun 24 16:08:44 2013] Giving source the simple spatial ID 7 for pass 0, mean size = 13.15"
[Mon Jun 24 16:08:45 2013] fullrun_pn_xmm0018141301_pi300-10000_cl_pass0_src7.ximg exists
[Mon Jun 24 16:08:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018141301_pi300-10000_cl_pass0_src7.csv
[Mon Jun 24 16:08:45 2013] fullrun_pn_xmm0018141301_pi300-10000_cl_pass0_src7_1.ximg exists
[Mon Jun 24 16:08:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018141301_pi300-10000_cl_pass0_src7.csv
[Mon Jun 24 16:08:45 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0018141301_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0018141301_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 24 16:08:47 2013] fullrun_pn_xmm0018141301_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Mon Jun 24 16:08:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018141301_pi300-10000_cl_pass0_tfrozen_src7.csv
[Mon Jun 24 16:08:47 2013] fullrun_pn_xmm0018141301_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Mon Jun 24 16:08:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018141301_pi300-10000_cl_pass0_tfrozen_src7.csv
[Mon Jun 24 16:08:47 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0018141301_pi300-10000_cl_pass0_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0018141301_pi300-10000_cl_pass0_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 24 16:09:32 2013] Warning, spatial fit 7 centroid is now closest to src. 14
[Mon Jun 24 16:09:33 2013] Vigneting correction estimate = 1.000000
[Mon Jun 24 16:09:33 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 24 16:09:33 2013] Assessing source extent using major
[Mon Jun 24 16:09:33 2013] Source does appear to be extended
[Mon Jun 24 16:09:33 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 24 16:09:33 2013] Source is confused with source 14
[Mon Jun 24 16:10:51 2013] Using EEF radius (= 13.15 ")to estimate initial spatial extent for simple fitting
[Mon Jun 24 16:10:51 2013] Initial guess for spatial extent in simple fitting = 13.15"
[Mon Jun 24 16:10:51 2013] source mask rpix=3.0, npix_max = 49, mask sum = 48, frac = 0.967
[Mon Jun 24 16:10:51 2013] Giving source the simple spatial ID 7 for pass 1, mean size = 13.15"
[Mon Jun 24 16:10:52 2013] fullrun_pn_xmm0018141301_pi300-10000_cl_pass1_src7.ximg exists
[Mon Jun 24 16:10:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018141301_pi300-10000_cl_pass1_src7.csv
[Mon Jun 24 16:10:52 2013] fullrun_pn_xmm0018141301_pi300-10000_cl_pass1_src7_1.ximg exists
[Mon Jun 24 16:10:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018141301_pi300-10000_cl_pass1_src7.csv
[Mon Jun 24 16:10:52 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0018141301_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0018141301_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 24 16:10:57 2013] fullrun_pn_xmm0018141301_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Mon Jun 24 16:10:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018141301_pi300-10000_cl_pass1_tfrozen_src7.csv
[Mon Jun 24 16:10:57 2013] fullrun_pn_xmm0018141301_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Mon Jun 24 16:10:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018141301_pi300-10000_cl_pass1_tfrozen_src7.csv
[Mon Jun 24 16:10:57 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0018141301_pi300-10000_cl_pass1_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0018141301_pi300-10000_cl_pass1_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 24 16:11:49 2013] Spatial fit model total counts = 2109.300000, observed total counts = 1991.000000
[Mon Jun 24 16:11:49 2013] Offset between fit and detection position for source 8 = 2.959851 pixels
[Mon Jun 24 16:11:49 2013] Warning, changing simple spatial fit ID from 7 to 5
[Mon Jun 24 16:11:49 2013] 2089.318000 total counts/ 1661.680000 bgd. counts: snr = 10.490655
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 2.959851 pixels
  Position = (237.1, 471.7) = 20 57 47.36 31 11 32.4
  Extent = 26.7 (26.5-26.8)", rotation angle = 0
  Source counts = 427.6 +/- 45.7
  Background counts = 1661.7
  Rate = 0.1 +/- 0.01
[Mon Jun 24 16:11:49 2013] Spatial fit model total counts = 7440.270000, observed total counts = 5746.000000
[Mon Jun 24 16:11:49 2013] Poor agreement between spatial fit and data for source 8
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jun 24 16:11:50 2013] Vigneting correction estimate = 1.000000
[Mon Jun 24 16:11:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 24 16:11:50 2013] Assessing source extent using major axis lower bound
[Mon Jun 24 16:11:50 2013] Source does appear to be extended
[Mon Jun 24 16:11:50 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 24 16:13:04 2013] XMMSAS src. selection expression = ellipse(20576.946000, 40985.540000, 1601.166046, 1601.166046, 0.000000, X, Y)
[Mon Jun 24 16:13:04 2013] Not overwriting source region fullrun_pn_xmm0018141301_pi300-10000_pass1_cl_src8_src.reg
[Mon Jun 24 16:13:04 2013] Extracting stamp from image fullrun_pn_xmm0018141301_pi300-10000_cl_sm2.00.img.gz, (145, 380) - (329, 564)
[Mon Jun 24 16:13:04 2013] XMMSAS bgd. selection expression = annulus(20576.946000, 40985.540000, 2668.610077, 5337.220154, X, Y) && !ellipse(20005.461975, 41523.754913, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21719.834305, 41170.460785, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21562.187958, 40649.164368, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20692.375137, 40585.255157, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21685.920288, 40299.138580, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21520.947800, 39580.916000, 1940.712056, 1940.712056, 0.000000, X, Y) && !ellipse(23130.439423, 39010.182922, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21708.113678, 39106.942810, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22860.837128, 38567.233765, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22382.938000, 38439.792000, 1069.464031, 1069.464031, 0.000000, X, Y) && !ellipse(23725.975769, 37008.967865, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20882.229645, 42545.386292, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20866.359207, 41881.474976, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22302.011871, 39447.869812, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25006.580000, 38795.616000, 1512.448044, 290.147208, 359.905000, X, Y) && !ellipse(25076.897156, 37192.581726, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20711.890930, 44542.260376, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20042.603180, 41932.544464, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19473.157806, 42071.545868, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24896.418884, 37695.677917, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26673.772491, 35452.717133, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26441.043243, 34815.318939, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21136.151337, 44534.369629, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 24 16:13:04 2013] Writing fullrun_pn_xmm0018141301_pi300-10000_pass1_cl_src8.gif
[Mon Jun 24 16:13:11 2013] ../../xmm0018141301/products/events/fullrun_pn_xmm0018141301_pi300-10000_pass1_cl_src8_src.evt and ../../xmm0018141301/products/events/fullrun_pn_xmm0018141301_pi300-10000_pass1_cl_src8_bgd.evt exist, delete to re-create
[Mon Jun 24 16:13:11 2013] Mean detx,y = (-7995.85, -12848.50) 
[Mon Jun 24 16:13:11 2013] ../../xmm0018141301/products/images/fullrun_pn_xmm0018141301_pi300-10000_pass1_cl_src8_src.img and ../../xmm0018141301/products/images/fullrun_pn_xmm0018141301_pi300-10000_pass1_cl_src8_bgd.img exist, delete to re-create
[Mon Jun 24 16:13:11 2013] ../../xmm0018141301/products/spectra/fullrun_pn_xmm0018141301_pi300-10000_pass1_cl_src8_src_b10.pi.gz and ../../xmm0018141301/products/spectra/fullrun_pn_xmm0018141301_pi300-10000_pass1_cl_src8_bgd.pi exist, delete to re-create
[Mon Jun 24 16:13:11 2013] Setting source spectrum file to fullrun_pn_xmm0018141301_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Mon Jun 24 16:13:11 2013] Setting bgd. spectrum file to fullrun_pn_xmm0018141301_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Mon Jun 24 16:13:11 2013] ../../xmm0018141301/products/lightcurves/fullrun_pn_xmm0018141301_pi300-10000_pass1_cl_src8_src.lc and ../../xmm0018141301/products/lightcurves/fullrun_pn_xmm0018141301_pi300-10000_pass1_cl_src8_bgd.lc exist, delete to re-create
[Mon Jun 24 16:13:36 2013] fullrun_pn_xmm0018141301_pi300-10000_pass1_cl_src8.rmf exists, delete to re-create
[Mon Jun 24 16:13:36 2013] fullrun_pn_xmm0018141301_pi300-10000_pass1_cl_src8.arf exists, delete to re-create