[Mon Jun 24 16:07:16 2013] Detection parameters:
  Position = (359.0, 314.9) = 20 57 6.08 31 0 13.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 450.2 +/- 46.9
  Background counts = 1068.9
  Rate = 0.09 +/- 0.009

[Mon Jun 24 16:07:20 2013] Off-axis axis estimate = 4.55'
[Mon Jun 24 16:08:44 2013] Using EEF radius (= 8.70 ")to estimate initial spatial extent for simple fitting
[Mon Jun 24 16:08:44 2013] Initial guess for spatial extent in simple fitting = 8.70"
[Mon Jun 24 16:08:44 2013] source mask rpix=2.0, npix_max = 25, mask sum = 23, frac = 0.920
[Mon Jun 24 16:08:44 2013] Giving source the simple spatial ID 63 for pass 0, mean size = 8.70"
[Mon Jun 24 16:08:46 2013] fullrun_pn_xmm0018141301_pi300-10000_cl_pass0_src63.ximg exists
[Mon Jun 24 16:08:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018141301_pi300-10000_cl_pass0_src63.csv
[Mon Jun 24 16:08:46 2013] fullrun_pn_xmm0018141301_pi300-10000_cl_pass0_src63_1.ximg exists
[Mon Jun 24 16:08:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018141301_pi300-10000_cl_pass0_src63.csv
[Mon Jun 24 16:08:46 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0018141301_pi300-10000_cl_pass0_src63_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0018141301_pi300-10000_cl_pass0_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 24 16:08:50 2013] fullrun_pn_xmm0018141301_pi300-10000_cl_pass0_tfrozen_src63.ximg exists
[Mon Jun 24 16:08:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018141301_pi300-10000_cl_pass0_tfrozen_src63.csv
[Mon Jun 24 16:08:50 2013] fullrun_pn_xmm0018141301_pi300-10000_cl_pass0_tfrozen_src63_1.ximg exists
[Mon Jun 24 16:08:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018141301_pi300-10000_cl_pass0_tfrozen_src63.csv
[Mon Jun 24 16:08:50 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0018141301_pi300-10000_cl_pass0_tfrozen_src63_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0018141301_pi300-10000_cl_pass0_tfrozen_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 24 16:09:32 2013] Spatial fit model total counts = 4264.290000, observed total counts = 3721.000000
[Mon Jun 24 16:09:32 2013] Poor agreement between spatial fit and data for source 66
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jun 24 16:09:33 2013] Spatial fit model total counts = 2813.800000, observed total counts = 1963.000000
[Mon Jun 24 16:09:33 2013] Poor agreement between spatial fit and data for source 66
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jun 24 16:09:33 2013] Vigneting correction estimate = 1.000000
[Mon Jun 24 16:09:33 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 24 16:09:33 2013] Assessing source extent using major
[Mon Jun 24 16:09:33 2013] Source does appear to be extended
[Mon Jun 24 16:09:33 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 24 16:10:51 2013] Using EEF radius (= 8.70 ")to estimate initial spatial extent for simple fitting
[Mon Jun 24 16:10:51 2013] Initial guess for spatial extent in simple fitting = 8.70"
[Mon Jun 24 16:10:51 2013] source mask rpix=2.0, npix_max = 25, mask sum = 23, frac = 0.920
[Mon Jun 24 16:10:51 2013] Giving source the simple spatial ID 58 for pass 1, mean size = 8.70"
[Mon Jun 24 16:10:55 2013] fullrun_pn_xmm0018141301_pi300-10000_cl_pass1_src58.ximg exists
[Mon Jun 24 16:10:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018141301_pi300-10000_cl_pass1_src58.csv
[Mon Jun 24 16:10:55 2013] fullrun_pn_xmm0018141301_pi300-10000_cl_pass1_src58_1.ximg exists
[Mon Jun 24 16:10:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018141301_pi300-10000_cl_pass1_src58.csv
[Mon Jun 24 16:10:55 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0018141301_pi300-10000_cl_pass1_src58_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0018141301_pi300-10000_cl_pass1_src58.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 24 16:11:00 2013] fullrun_pn_xmm0018141301_pi300-10000_cl_pass1_tfrozen_src58.ximg exists
[Mon Jun 24 16:11:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018141301_pi300-10000_cl_pass1_tfrozen_src58.csv
[Mon Jun 24 16:11:00 2013] fullrun_pn_xmm0018141301_pi300-10000_cl_pass1_tfrozen_src58_1.ximg exists
[Mon Jun 24 16:11:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018141301_pi300-10000_cl_pass1_tfrozen_src58.csv
[Mon Jun 24 16:11:00 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0018141301_pi300-10000_cl_pass1_tfrozen_src58_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0018141301_pi300-10000_cl_pass1_tfrozen_src58.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 24 16:11:49 2013] Warning, spatial fit 58 centroid is now closest to src. 69
[Mon Jun 24 16:11:49 2013] Source 66 is offset by 5.976224 and -1.233265 pixels which is larger than
2 X fitted extent = 5.571540 x 5.571540, not incorporating fit results
[Mon Jun 24 16:11:50 2013] Vigneting correction estimate = 1.000000
[Mon Jun 24 16:11:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 24 16:11:50 2013] Assessing source extent using major
[Mon Jun 24 16:11:50 2013] Source does appear to be extended
[Mon Jun 24 16:11:50 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 24 16:13:06 2013] XMMSAS src. selection expression = ellipse(31181.879486, 27350.889923, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun 24 16:13:06 2013] Not overwriting source region fullrun_pn_xmm0018141301_pi300-10000_pass1_cl_src66_src.reg
[Mon Jun 24 16:13:06 2013] Extracting stamp from image fullrun_pn_xmm0018141301_pi300-10000_cl_sm2.00.img.gz, (321, 277) - (396, 352)
[Mon Jun 24 16:13:07 2013] XMMSAS bgd. selection expression = annulus(31181.879486, 27350.889923, 1087.500000, 2175.000000, X, Y) && !ellipse(31928.173706, 25707.389618, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29257.166000, 30667.848000, 1431.104041, 1431.104041, 0.000000, X, Y) && !ellipse(28520.286957, 30313.238861, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28344.786865, 29620.140808, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28870.174683, 29010.737244, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28238.962708, 28632.100861, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28872.463318, 28520.918854, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29783.111816, 28482.389069, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30624.636627, 28219.522583, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32345.809814, 27267.649445, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32187.575378, 26918.523712, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29614.586487, 27591.069183, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31749.097290, 26223.296326, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34287.248000, 26288.547000, 3048.928088, 3048.928088, 0.000000, X, Y) && !ellipse(33662.214000, 26148.258200, 1524.464044, 1524.464044, 0.000000, X, Y) && !ellipse(32015.882599, 25175.082794, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31419.130249, 25621.626862, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31250.719086, 29790.851227, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30046.326111, 29701.886505, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30927.001984, 29007.609619, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31259.727600, 28162.365112, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33244.144287, 28005.837860, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32766.623993, 26045.324402, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33707.260000, 24930.858000, 1514.000044, 1514.000044, 0.000000, X, Y) && !ellipse(31767.199280, 29193.682037, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28258.681610, 25084.044495, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28139.651337, 24480.346588, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 24 16:13:07 2013] Writing fullrun_pn_xmm0018141301_pi300-10000_pass1_cl_src66.gif
[Mon Jun 24 16:13:14 2013] ../../xmm0018141301/products/events/fullrun_pn_xmm0018141301_pi300-10000_pass1_cl_src66_src.evt and ../../xmm0018141301/products/events/fullrun_pn_xmm0018141301_pi300-10000_pass1_cl_src66_bgd.evt exist, delete to re-create
[Mon Jun 24 16:13:14 2013] Mean detx,y = (4070.63, -532.56) 
[Mon Jun 24 16:13:14 2013] ../../xmm0018141301/products/images/fullrun_pn_xmm0018141301_pi300-10000_pass1_cl_src66_src.img and ../../xmm0018141301/products/images/fullrun_pn_xmm0018141301_pi300-10000_pass1_cl_src66_bgd.img exist, delete to re-create
[Mon Jun 24 16:13:14 2013] ../../xmm0018141301/products/spectra/fullrun_pn_xmm0018141301_pi300-10000_pass1_cl_src66_src_b10.pi.gz and ../../xmm0018141301/products/spectra/fullrun_pn_xmm0018141301_pi300-10000_pass1_cl_src66_bgd.pi exist, delete to re-create
[Mon Jun 24 16:13:14 2013] Setting source spectrum file to fullrun_pn_xmm0018141301_pi300-10000_pass1_cl_src66_src_b10.pi.gz
[Mon Jun 24 16:13:14 2013] Setting bgd. spectrum file to fullrun_pn_xmm0018141301_pi300-10000_pass1_cl_src66_bgd.pi.gz
[Mon Jun 24 16:13:14 2013] ../../xmm0018141301/products/lightcurves/fullrun_pn_xmm0018141301_pi300-10000_pass1_cl_src66_src.lc and ../../xmm0018141301/products/lightcurves/fullrun_pn_xmm0018141301_pi300-10000_pass1_cl_src66_bgd.lc exist, delete to re-create
[Mon Jun 24 16:13:36 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jun 24 16:13:36 2013] rmf not generated due to insufficient counts
[Mon Jun 24 16:13:36 2013] fullrun_pn_xmm0018141301_pi300-10000_pass1_cl_src66.arf exists, delete to re-create