[Mon Jun 24 16:07:15 2013] Detection parameters:
  Position = (332.4, 334.0) = 20 57 15.07 31 1 37.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 434.7 +/- 41.8
  Background counts = 481.9
  Rate = 0.04 +/- 0.004

[Mon Jun 24 16:07:20 2013] Off-axis axis estimate = 3.57'
[Mon Jun 24 16:08:44 2013] Using EEF radius (= 8.21 ")to estimate initial spatial extent for simple fitting
[Mon Jun 24 16:08:44 2013] Initial guess for spatial extent in simple fitting = 8.21"
[Mon Jun 24 16:08:44 2013] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.877
[Mon Jun 24 16:08:44 2013] Giving source the simple spatial ID 55 for pass 0, mean size = 8.21"
[Mon Jun 24 16:08:46 2013] fullrun_pn_xmm0018141301_pi300-10000_cl_pass0_src55.ximg exists
[Mon Jun 24 16:08:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018141301_pi300-10000_cl_pass0_src55.csv
[Mon Jun 24 16:08:46 2013] fullrun_pn_xmm0018141301_pi300-10000_cl_pass0_src55_1.ximg exists
[Mon Jun 24 16:08:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018141301_pi300-10000_cl_pass0_src55.csv
[Mon Jun 24 16:08:46 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0018141301_pi300-10000_cl_pass0_src55_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0018141301_pi300-10000_cl_pass0_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 24 16:08:49 2013] fullrun_pn_xmm0018141301_pi300-10000_cl_pass0_tfrozen_src55.ximg exists
[Mon Jun 24 16:08:49 2013] fullrun_pn_xmm0018141301_pi300-10000_cl_pass0_tfrozen_src55_1.ximg exists
[Mon Jun 24 16:08:49 2013] Fit fullrun_pn_xmm0018141301_pi300-10000_cl_pass0_tfrozen_src55 appears to have run properly
[Mon Jun 24 16:09:32 2013] Source 57 is offset by 0.648123 and -1.867181 pixels which is larger than
2 X fitted extent = 1.485876 x 1.485876, not incorporating fit results
[Mon Jun 24 16:09:32 2013] Warning, spatial fit 55 centroid is now closest to src. 54
[Mon Jun 24 16:09:32 2013] Source 57 is offset by -6.010015 and -2.675618 pixels which is larger than
2 X fitted extent = 2.700966 x 2.700966, not incorporating fit results
[Mon Jun 24 16:09:33 2013] Source 57 is offset by -6.762176 and -2.067641 pixels which is larger than
2 X fitted extent = 2.455807 x 2.455807, not incorporating fit results
[Mon Jun 24 16:09:33 2013] Vigneting correction estimate = 1.000000
[Mon Jun 24 16:09:33 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 24 16:09:33 2013] Assessing source extent using major
[Mon Jun 24 16:09:33 2013] Source does appear to be extended
[Mon Jun 24 16:09:33 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 24 16:09:33 2013] Source is confused with source 62
[Mon Jun 24 16:10:51 2013] Using EEF radius (= 8.21 ")to estimate initial spatial extent for simple fitting
[Mon Jun 24 16:10:51 2013] Initial guess for spatial extent in simple fitting = 8.21"
[Mon Jun 24 16:10:51 2013] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.877
[Mon Jun 24 16:10:51 2013] Giving source the simple spatial ID 51 for pass 1, mean size = 8.21"
[Mon Jun 24 16:10:55 2013] fullrun_pn_xmm0018141301_pi300-10000_cl_pass1_src51.ximg exists
[Mon Jun 24 16:10:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018141301_pi300-10000_cl_pass1_src51.csv
[Mon Jun 24 16:10:55 2013] fullrun_pn_xmm0018141301_pi300-10000_cl_pass1_src51_1.ximg exists
[Mon Jun 24 16:10:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018141301_pi300-10000_cl_pass1_src51.csv
[Mon Jun 24 16:10:55 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0018141301_pi300-10000_cl_pass1_src51_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0018141301_pi300-10000_cl_pass1_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 24 16:11:00 2013] fullrun_pn_xmm0018141301_pi300-10000_cl_pass1_tfrozen_src51.ximg exists
[Mon Jun 24 16:11:00 2013] fullrun_pn_xmm0018141301_pi300-10000_cl_pass1_tfrozen_src51_1.ximg exists
[Mon Jun 24 16:11:00 2013] Fit fullrun_pn_xmm0018141301_pi300-10000_cl_pass1_tfrozen_src51 appears to have run properly
[Mon Jun 24 16:11:49 2013] Source 57 is offset by -6.499280 and -2.225475 pixels which is larger than
2 X fitted extent = 1.789687 x 1.789687, not incorporating fit results
[Mon Jun 24 16:11:49 2013] Source 57 is offset by 0.117617 and -3.266721 pixels which is larger than
2 X fitted extent = 7.280966 x 0.910120, not incorporating fit results
[Mon Jun 24 16:11:50 2013] Vigneting correction estimate = 1.000000
[Mon Jun 24 16:11:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 24 16:11:50 2013] Assessing source extent using major
[Mon Jun 24 16:11:50 2013] Source does appear to be extended
[Mon Jun 24 16:11:50 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 24 16:13:06 2013] XMMSAS src. selection expression = ellipse(28870.174683, 29010.737244, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun 24 16:13:06 2013] Not overwriting source region fullrun_pn_xmm0018141301_pi300-10000_pass1_cl_src57_src.reg
[Mon Jun 24 16:13:06 2013] Extracting stamp from image fullrun_pn_xmm0018141301_pi300-10000_cl_sm2.00.img.gz, (295, 297) - (370, 372)
[Mon Jun 24 16:13:06 2013] XMMSAS bgd. selection expression = annulus(28870.174683, 29010.737244, 1087.500000, 2175.000000, X, Y) && !ellipse(27374.737780, 27466.037800, 1170.512034, 1170.512034, 0.000000, X, Y) && !ellipse(27358.738190, 31962.943970, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27877.857483, 31529.980377, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29257.166000, 30667.848000, 1431.104041, 1431.104041, 0.000000, X, Y) && !ellipse(27463.293243, 31186.780670, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26973.941600, 30661.284000, 1517.104044, 1517.104044, 0.000000, X, Y) && !ellipse(26851.565600, 30521.927800, 952.152027, 952.152027, 0.000000, X, Y) && !ellipse(28520.286957, 30313.238861, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27181.848200, 30163.034000, 1348.368039, 1348.368039, 0.000000, X, Y) && !ellipse(28344.786865, 29620.140808, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27637.245453, 29535.763977, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27372.937286, 29011.661194, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28238.962708, 28632.100861, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28872.463318, 28520.918854, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29783.111816, 28482.389069, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30624.636627, 28219.522583, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31181.879486, 27350.889923, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29614.586487, 27591.069183, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31749.097290, 26223.296326, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31250.719086, 29790.851227, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30046.326111, 29701.886505, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30927.001984, 29007.609619, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31259.727600, 28162.365112, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31767.199280, 29193.682037, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 24 16:13:06 2013] Writing fullrun_pn_xmm0018141301_pi300-10000_pass1_cl_src57.gif
[Mon Jun 24 16:13:13 2013] ../../xmm0018141301/products/events/fullrun_pn_xmm0018141301_pi300-10000_pass1_cl_src57_src.evt and ../../xmm0018141301/products/events/fullrun_pn_xmm0018141301_pi300-10000_pass1_cl_src57_bgd.evt exist, delete to re-create
[Mon Jun 24 16:13:13 2013] Mean detx,y = (1482.53, -1939.62) 
[Mon Jun 24 16:13:13 2013] ../../xmm0018141301/products/images/fullrun_pn_xmm0018141301_pi300-10000_pass1_cl_src57_src.img and ../../xmm0018141301/products/images/fullrun_pn_xmm0018141301_pi300-10000_pass1_cl_src57_bgd.img exist, delete to re-create
[Mon Jun 24 16:13:13 2013] ../../xmm0018141301/products/spectra/fullrun_pn_xmm0018141301_pi300-10000_pass1_cl_src57_src_b10.pi.gz and ../../xmm0018141301/products/spectra/fullrun_pn_xmm0018141301_pi300-10000_pass1_cl_src57_bgd.pi exist, delete to re-create
[Mon Jun 24 16:13:13 2013] Setting source spectrum file to fullrun_pn_xmm0018141301_pi300-10000_pass1_cl_src57_src_b10.pi.gz
[Mon Jun 24 16:13:13 2013] Setting bgd. spectrum file to fullrun_pn_xmm0018141301_pi300-10000_pass1_cl_src57_bgd.pi.gz
[Mon Jun 24 16:13:13 2013] ../../xmm0018141301/products/lightcurves/fullrun_pn_xmm0018141301_pi300-10000_pass1_cl_src57_src.lc and ../../xmm0018141301/products/lightcurves/fullrun_pn_xmm0018141301_pi300-10000_pass1_cl_src57_bgd.lc exist, delete to re-create
[Mon Jun 24 16:13:36 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jun 24 16:13:36 2013] rmf not generated due to insufficient counts
[Mon Jun 24 16:13:36 2013] fullrun_pn_xmm0018141301_pi300-10000_pass1_cl_src57.arf exists, delete to re-create