[Mon Jun 24 16:07:30 2013] Detection parameters:
  Position = (351.4, 339.9) = 20 57 8.62 31 1 57.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 214.2 +/- 29.4
  Background counts = 259.3
  Rate = 0.02 +/- 0.003

[Mon Jun 24 16:07:34 2013] Off-axis axis estimate = 4.88'
[Mon Jun 24 16:08:57 2013] Using EEF radius (= 8.87 ")to estimate initial spatial extent for simple fitting
[Mon Jun 24 16:08:57 2013] Initial guess for spatial extent in simple fitting = 8.87"
[Mon Jun 24 16:08:57 2013] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.970
[Mon Jun 24 16:08:57 2013] Giving source the simple spatial ID 49 for pass 0, mean size = 8.87"
[Mon Jun 24 16:08:59 2013] fullrun_mos2_xmm0018141301_pi300-10000_cl_pass0_src49.ximg exists
[Mon Jun 24 16:08:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018141301_pi300-10000_cl_pass0_src49.csv
[Mon Jun 24 16:08:59 2013] fullrun_mos2_xmm0018141301_pi300-10000_cl_pass0_src49_1.ximg exists
[Mon Jun 24 16:08:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018141301_pi300-10000_cl_pass0_src49.csv
[Mon Jun 24 16:08:59 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018141301_pi300-10000_cl_pass0_src49_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018141301_pi300-10000_cl_pass0_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 24 16:09:02 2013] fullrun_mos2_xmm0018141301_pi300-10000_cl_pass0_tfrozen_src49.ximg exists
[Mon Jun 24 16:09:02 2013] fullrun_mos2_xmm0018141301_pi300-10000_cl_pass0_tfrozen_src49_1.ximg exists
[Mon Jun 24 16:09:02 2013] Fit fullrun_mos2_xmm0018141301_pi300-10000_cl_pass0_tfrozen_src49 appears to have run properly
[Mon Jun 24 16:10:17 2013] Warning, spatial fit 49 centroid is now closest to src. 110
[Mon Jun 24 16:10:18 2013] Spatial fit model total counts = 4164.880000, observed total counts = 4240.000000
[Mon Jun 24 16:10:18 2013] Offset between fit and detection position for source 67 = 3.547911 pixels
[Mon Jun 24 16:10:18 2013] Warning, changing simple spatial fit ID from 49 to 55
[Mon Jun 24 16:10:18 2013] 3947.259000 total counts/ 3450.330000 bgd. counts: snr = 8.459877
Spatial fit parameters:
  Offset between fit and detection position for source 67 = 3.547911 pixels
  Position = (354.9, 340.5) = 20 57 7.44 31 2 1.7
  Extent = 17.8 (17.8-35.6)", rotation angle = 0
  Source counts = 496.9 +/- 62.8
  Background counts = 3450.3
  Rate = 0.04 +/- 0.006
[Mon Jun 24 16:10:18 2013] Vigneting correction estimate = 1.000000
[Mon Jun 24 16:10:18 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 24 16:10:18 2013] Assessing source extent using major axis lower bound
[Mon Jun 24 16:10:18 2013] Source does appear to be extended
[Mon Jun 24 16:10:18 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 24 16:10:18 2013] Source is confused with source 70
[Mon Jun 24 16:11:13 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jun 24 16:11:13 2013] Initial guess for spatial extent in simple fitting = 17.80"
[Mon Jun 24 16:11:13 2013] source mask rpix=4.1, npix_max = 84, mask sum = 90, frac = 1.067
[Mon Jun 24 16:11:13 2013] Giving source the simple spatial ID 42 for pass 1, mean size = 17.80"
[Mon Jun 24 16:11:15 2013] fullrun_mos2_xmm0018141301_pi300-10000_cl_pass1_src42.ximg exists
[Mon Jun 24 16:11:15 2013] fullrun_mos2_xmm0018141301_pi300-10000_cl_pass1_src42_1.ximg exists
[Mon Jun 24 16:11:15 2013] Fit fullrun_mos2_xmm0018141301_pi300-10000_cl_pass1_src42 appears to have run properly
[Mon Jun 24 16:11:18 2013] fullrun_mos2_xmm0018141301_pi300-10000_cl_pass1_tfrozen_src42.ximg exists
[Mon Jun 24 16:11:18 2013] fullrun_mos2_xmm0018141301_pi300-10000_cl_pass1_tfrozen_src42_1.ximg exists
[Mon Jun 24 16:11:18 2013] Fit fullrun_mos2_xmm0018141301_pi300-10000_cl_pass1_tfrozen_src42 appears to have run properly
[Mon Jun 24 16:12:33 2013] Warning, spatial fit 42 centroid is now closest to src. 110
[Mon Jun 24 16:12:33 2013] Spatial fit model total counts = 4170.680000, observed total counts = 4240.000000
[Mon Jun 24 16:12:33 2013] Offset between fit and detection position for source 67 = 0.198129 pixels
[Mon Jun 24 16:12:33 2013] Warning, changing simple spatial fit ID from 42 to 47
[Mon Jun 24 16:12:33 2013] 3910.254000 total counts/ 3240.810000 bgd. counts: snr = 11.759462
Spatial fit parameters:
  Offset between fit and detection position for source 67 = 0.198129 pixels
  Position = (354.7, 340.4) = 20 57 7.50 31 2 1.5
  Extent = 17.8 (17.8-17.8)", rotation angle = 0
  Source counts = 669.4 +/- 62.5
  Background counts = 3240.8
  Rate = 0.06 +/- 0.006
[Mon Jun 24 16:12:33 2013] Vigneting correction estimate = 1.000000
[Mon Jun 24 16:12:33 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 24 16:12:33 2013] Assessing source extent using major axis lower bound
[Mon Jun 24 16:12:33 2013] Source does appear to be extended
[Mon Jun 24 16:12:33 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 24 22:42:26 2013] XMMSAS src. selection expression = ellipse(30814.550200, 29568.108000, 1067.814031, 1067.814031, 0.000000, X, Y)
[Mon Jun 24 22:42:26 2013] Not overwriting source region fullrun_mos2_xmm0018141301_pi300-10000_pass1_cl_src67_src.reg
[Mon Jun 24 22:42:26 2013] Extracting stamp from image fullrun_mos2_xmm0018141301_pi300-10000_cl_sm2.00.img.gz, (293, 279) - (416, 402)
[Mon Jun 24 22:42:26 2013] XMMSAS bgd. selection expression = annulus(30814.550200, 29568.108000, 1779.690051, 3559.380102, X, Y) && !ellipse(27373.370000, 27132.016000, 1117.032032, 1117.032032, 0.000000, X, Y) && !ellipse(27162.986000, 30487.986000, 683.629620, 683.629620, 0.000000, X, Y) && !ellipse(27779.129760, 29615.604000, 1008.704029, 1008.704029, 0.000000, X, Y) && !ellipse(29976.952000, 28266.600000, 965.192028, 965.192028, 0.000000, X, Y) && !ellipse(29748.217200, 27603.055000, 713.353621, 713.353621, 0.000000, X, Y) && !ellipse(29001.516327, 30575.555756, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27687.538000, 31717.394600, 1225.632035, 1225.632035, 0.000000, X, Y) && !ellipse(29115.207336, 27705.617767, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28918.347534, 31093.735168, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31201.993988, 27547.072693, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27658.283905, 31097.128296, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27671.052600, 32486.821200, 628.509618, 628.509618, 0.000000, X, Y) && !ellipse(29591.726000, 28785.754000, 1341.096039, 1341.096039, 0.000000, X, Y) && !ellipse(28608.402069, 29611.503998, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29226.222076, 29794.432861, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31273.905457, 28069.516083, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27890.527283, 30412.404205, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30407.492000, 27339.668000, 1077.472031, 1077.472031, 0.000000, X, Y) && !ellipse(29501.419000, 29840.304000, 1764.600051, 1764.600051, 0.000000, X, Y) && !ellipse(29619.014000, 30487.986000, 1393.032040, 1393.032040, 0.000000, X, Y) && !ellipse(29014.810059, 29096.383179, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28094.969849, 26582.383728, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29647.514000, 29614.478000, 1402.896040, 1402.896040, 0.000000, X, Y) && !ellipse(31120.460693, 26751.339172, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30574.260101, 28743.564301, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30265.233276, 30237.246613, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27139.018585, 32460.302643, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27112.011627, 26489.189545, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30901.330505, 29884.334808, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30928.565796, 29093.364410, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31237.892000, 30850.589400, 685.778420, 685.778420, 0.000000, X, Y) && !ellipse(31434.256200, 25808.140000, 1718.088049, 1718.088049, 0.000000, X, Y) && !ellipse(29227.438080, 26670.071381, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 24 22:42:26 2013] Writing fullrun_mos2_xmm0018141301_pi300-10000_pass1_cl_src67.gif
[Mon Jun 24 22:57:43 2013] Mean detx,y = (-3114.52, 2638.32) 
[Mon Jun 24 22:57:45 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 24 22:58:07 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 24 22:58:07 2013] Setting source spectrum file to fullrun_mos2_xmm0018141301_pi300-10000_pass1_cl_src67_src_b10.pi.gz
[Mon Jun 24 22:58:07 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0018141301_pi300-10000_pass1_cl_src67_bgd.pi.gz