[Mon Jun 24 16:07:30 2013] Detection parameters:
  Position = (344.3, 355.0) = 20 57 11.05 31 3 7.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 304.4 +/- 32.7
  Background counts = 255.9
  Rate = 0.03 +/- 0.003

[Mon Jun 24 16:07:34 2013] Off-axis axis estimate = 5.28'
[Mon Jun 24 16:08:57 2013] Using EEF radius (= 9.07 ")to estimate initial spatial extent for simple fitting
[Mon Jun 24 16:08:57 2013] Initial guess for spatial extent in simple fitting = 9.07"
[Mon Jun 24 16:08:57 2013] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.123
[Mon Jun 24 16:08:57 2013] Giving source the simple spatial ID 30 for pass 0, mean size = 9.07"
[Mon Jun 24 16:08:59 2013] fullrun_mos2_xmm0018141301_pi300-10000_cl_pass0_src30.ximg exists
[Mon Jun 24 16:08:59 2013] fullrun_mos2_xmm0018141301_pi300-10000_cl_pass0_src30_1.ximg exists
[Mon Jun 24 16:08:59 2013] Fit fullrun_mos2_xmm0018141301_pi300-10000_cl_pass0_src30 appears to have run properly
[Mon Jun 24 16:09:01 2013] fullrun_mos2_xmm0018141301_pi300-10000_cl_pass0_tfrozen_src30.ximg exists
[Mon Jun 24 16:09:01 2013] fullrun_mos2_xmm0018141301_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists
[Mon Jun 24 16:09:01 2013] Fit fullrun_mos2_xmm0018141301_pi300-10000_cl_pass0_tfrozen_src30 appears to have run properly
[Mon Jun 24 16:10:17 2013] Source 59 is offset by 3.201712 and -6.023386 pixels which is larger than
2 X fitted extent = 1.006602 x 1.006602, not incorporating fit results
[Mon Jun 24 16:10:17 2013] Spatial fit model total counts = 4838.600000, observed total counts = 4844.000000
[Mon Jun 24 16:10:17 2013] Offset between fit and detection position for source 59 = 2.175181 pixels
[Mon Jun 24 16:10:17 2013] 4735.569000 total counts/ 4371.500000 bgd. counts: snr = 5.506409
Spatial fit parameters:
  Offset between fit and detection position for source 59 = 2.175181 pixels
  Position = (342.5, 356.3) = 20 57 11.64 31 3 10.8
  Extent = 18.1 (2.7-36.3)", rotation angle = 0
  Source counts = 364.1 +/- 68.8
  Background counts = 4371.5
  Rate = 0.03 +/- 0.006
[Mon Jun 24 16:10:18 2013] Vigneting correction estimate = 1.000000
[Mon Jun 24 16:10:18 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 24 16:10:18 2013] Assessing source extent using major axis lower bound
[Mon Jun 24 16:10:18 2013] Source does appear to be extended
[Mon Jun 24 16:10:18 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 24 16:10:18 2013] Source is confused with source 11
[Mon Jun 24 16:11:13 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jun 24 16:11:13 2013] Initial guess for spatial extent in simple fitting = 18.14"
[Mon Jun 24 16:11:13 2013] source mask rpix=4.2, npix_max = 87, mask sum = 81, frac = 0.929
[Mon Jun 24 16:11:13 2013] Giving source the simple spatial ID 27 for pass 1, mean size = 18.14"
[Mon Jun 24 16:11:15 2013] fullrun_mos2_xmm0018141301_pi300-10000_cl_pass1_src27.ximg exists
[Mon Jun 24 16:11:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018141301_pi300-10000_cl_pass1_src27.csv
[Mon Jun 24 16:11:15 2013] fullrun_mos2_xmm0018141301_pi300-10000_cl_pass1_src27_1.ximg exists
[Mon Jun 24 16:11:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018141301_pi300-10000_cl_pass1_src27.csv
[Mon Jun 24 16:11:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018141301_pi300-10000_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018141301_pi300-10000_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 24 16:11:18 2013] fullrun_mos2_xmm0018141301_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Mon Jun 24 16:11:18 2013] fullrun_mos2_xmm0018141301_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Mon Jun 24 16:11:18 2013] Fit fullrun_mos2_xmm0018141301_pi300-10000_cl_pass1_tfrozen_src27 appears to have run properly
[Mon Jun 24 16:12:33 2013] Source 59 is offset by 1.458278 and -4.722674 pixels which is larger than
2 X fitted extent = 1.006602 x 1.006602, not incorporating fit results
[Mon Jun 24 16:12:33 2013] Spatial fit model total counts = 4257.130000, observed total counts = 4533.000000
[Mon Jun 24 16:12:33 2013] Offset between fit and detection position for source 59 = 5.544264 pixels
[Mon Jun 24 16:12:33 2013] Warning, changing simple spatial fit ID from 27 to 11
[Mon Jun 24 16:12:33 2013] 4260.547000 total counts/ 3951.110000 bgd. counts: snr = 4.922806
Spatial fit parameters:
  Offset between fit and detection position for source 59 = 5.544264 pixels
  Position = (341.0, 351.0) = 20 57 12.15 31 2 47.6
  Extent = 17.4" x 17.4", rotation angle = 0
  Source counts = 309.4 +/- 65.3
  Background counts = 3951.1
  Rate = 0.03 +/- 0.006
[Mon Jun 24 16:12:33 2013] Vigneting correction estimate = 1.000000
[Mon Jun 24 16:12:33 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 24 16:12:33 2013] Assessing source extent using major
[Mon Jun 24 16:12:33 2013] Source does appear to be extended
[Mon Jun 24 16:12:33 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 24 22:42:25 2013] XMMSAS src. selection expression = ellipse(29619.014000, 30487.986000, 1044.774030, 1044.774030, 0.000000, X, Y)
[Mon Jun 24 22:42:25 2013] Not overwriting source region fullrun_mos2_xmm0018141301_pi300-10000_pass1_cl_src59_src.reg
[Mon Jun 24 22:42:25 2013] Extracting stamp from image fullrun_mos2_xmm0018141301_pi300-10000_cl_sm2.00.img.gz, (281, 291) - (401, 411)
[Mon Jun 24 22:42:25 2013] XMMSAS bgd. selection expression = annulus(29619.014000, 30487.986000, 1741.290050, 3482.580100, X, Y) && !ellipse(27373.370000, 27132.016000, 1117.032032, 1117.032032, 0.000000, X, Y) && !ellipse(27162.986000, 30487.986000, 683.629620, 683.629620, 0.000000, X, Y) && !ellipse(27779.129760, 29615.604000, 1008.704029, 1008.704029, 0.000000, X, Y) && !ellipse(29976.952000, 28266.600000, 965.192028, 965.192028, 0.000000, X, Y) && !ellipse(29748.217200, 27603.055000, 713.353621, 713.353621, 0.000000, X, Y) && !ellipse(29001.516327, 30575.555756, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27687.538000, 31717.394600, 1225.632035, 1225.632035, 0.000000, X, Y) && !ellipse(29115.207336, 27705.617767, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28918.347534, 31093.735168, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31201.993988, 27547.072693, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27658.283905, 31097.128296, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27671.052600, 32486.821200, 628.509618, 628.509618, 0.000000, X, Y) && !ellipse(29591.726000, 28785.754000, 1341.096039, 1341.096039, 0.000000, X, Y) && !ellipse(28608.402069, 29611.503998, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29226.222076, 29794.432861, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31273.905457, 28069.516083, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27890.527283, 30412.404205, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30407.492000, 27339.668000, 1077.472031, 1077.472031, 0.000000, X, Y) && !ellipse(29501.419000, 29840.304000, 1764.600051, 1764.600051, 0.000000, X, Y) && !ellipse(29014.810059, 29096.383179, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28094.969849, 26582.383728, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29647.514000, 29614.478000, 1402.896040, 1402.896040, 0.000000, X, Y) && !ellipse(31120.460693, 26751.339172, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30574.260101, 28743.564301, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33605.478000, 35861.140000, 1903.976055, 1903.976055, 0.000000, X, Y) && !ellipse(30265.233276, 30237.246613, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27139.018585, 32460.302643, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30814.550200, 29568.108000, 1423.752041, 1423.752041, 0.000000, X, Y) && !ellipse(27112.011627, 26489.189545, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30901.330505, 29884.334808, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30928.565796, 29093.364410, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31237.892000, 30850.589400, 685.778420, 685.778420, 0.000000, X, Y) && !ellipse(31434.256200, 25808.140000, 1718.088049, 1718.088049, 0.000000, X, Y) && !ellipse(29227.438080, 26670.071381, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 24 22:42:25 2013] Writing fullrun_mos2_xmm0018141301_pi300-10000_pass1_cl_src59.gif
[Mon Jun 24 22:44:28 2013] Mean detx,y = (-1807.47, 3416.28) 
[Mon Jun 24 22:44:29 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 24 22:44:59 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 24 22:44:59 2013] Setting source spectrum file to fullrun_mos2_xmm0018141301_pi300-10000_pass1_cl_src59_src_b10.pi.gz
[Mon Jun 24 22:44:59 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0018141301_pi300-10000_pass1_cl_src59_bgd.pi.gz