[Mon Jun 24 16:07:29 2013] Detection parameters:
  Position = (268.1, 451.9) = 20 57 36.84 31 10 8.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 166.7 +/- 22.5
  Background counts = 90.3
  Rate = 0.01 +/- 0.002

[Mon Jun 24 16:07:34 2013] Off-axis axis estimate = 11.34'
[Mon Jun 24 16:08:57 2013] Using EEF radius (= 12.10 ")to estimate initial spatial extent for simple fitting
[Mon Jun 24 16:08:57 2013] Initial guess for spatial extent in simple fitting = 12.10"
[Mon Jun 24 16:08:57 2013] source mask rpix=2.8, npix_max = 43, mask sum = 36, frac = 0.836
[Mon Jun 24 16:08:57 2013] Giving source the simple spatial ID 77 for pass 0, mean size = 12.10"
[Mon Jun 24 16:09:00 2013] fullrun_mos2_xmm0018141301_pi300-10000_cl_pass0_src77.ximg exists
[Mon Jun 24 16:09:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018141301_pi300-10000_cl_pass0_src77.csv
[Mon Jun 24 16:09:00 2013] fullrun_mos2_xmm0018141301_pi300-10000_cl_pass0_src77_1.ximg exists
[Mon Jun 24 16:09:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018141301_pi300-10000_cl_pass0_src77.csv
[Mon Jun 24 16:09:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018141301_pi300-10000_cl_pass0_src77_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018141301_pi300-10000_cl_pass0_src77.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 24 16:09:03 2013] fullrun_mos2_xmm0018141301_pi300-10000_cl_pass0_tfrozen_src77.ximg exists
[Mon Jun 24 16:09:03 2013] fullrun_mos2_xmm0018141301_pi300-10000_cl_pass0_tfrozen_src77_1.ximg exists
[Mon Jun 24 16:09:03 2013] Fit fullrun_mos2_xmm0018141301_pi300-10000_cl_pass0_tfrozen_src77 appears to have run properly
[Mon Jun 24 16:10:18 2013] Warning: source 77 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 30 at 11.801770 pixels away
[Mon Jun 24 16:10:18 2013] Vigneting correction estimate = 1.000000
[Mon Jun 24 16:10:18 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 24 16:10:18 2013] Assessing source extent using major
[Mon Jun 24 16:10:18 2013] Source does appear to be extended
[Mon Jun 24 16:10:18 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 24 16:10:18 2013] Source is confused with source 43
[Mon Jun 24 16:11:13 2013] Using EEF radius (= 12.10 ")to estimate initial spatial extent for simple fitting
[Mon Jun 24 16:11:13 2013] Initial guess for spatial extent in simple fitting = 12.10"
[Mon Jun 24 16:11:13 2013] source mask rpix=2.8, npix_max = 43, mask sum = 36, frac = 0.836
[Mon Jun 24 16:11:13 2013] Giving source the simple spatial ID 64 for pass 1, mean size = 12.10"
[Mon Jun 24 16:11:16 2013] fullrun_mos2_xmm0018141301_pi300-10000_cl_pass1_src64.ximg exists
[Mon Jun 24 16:11:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018141301_pi300-10000_cl_pass1_src64.csv
[Mon Jun 24 16:11:16 2013] fullrun_mos2_xmm0018141301_pi300-10000_cl_pass1_src64_1.ximg exists
[Mon Jun 24 16:11:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018141301_pi300-10000_cl_pass1_src64.csv
[Mon Jun 24 16:11:16 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018141301_pi300-10000_cl_pass1_src64_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018141301_pi300-10000_cl_pass1_src64.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 24 16:11:19 2013] fullrun_mos2_xmm0018141301_pi300-10000_cl_pass1_tfrozen_src64.ximg exists
[Mon Jun 24 16:11:19 2013] fullrun_mos2_xmm0018141301_pi300-10000_cl_pass1_tfrozen_src64_1.ximg exists
[Mon Jun 24 16:11:19 2013] Fit fullrun_mos2_xmm0018141301_pi300-10000_cl_pass1_tfrozen_src64 appears to have run properly
[Mon Jun 24 16:12:33 2013] Warning, spatial fit 64 centroid is now closest to src. 31
[Mon Jun 24 16:12:33 2013] Spatial fit model total counts = 1722.040000, observed total counts = 1720.000000
[Mon Jun 24 16:12:33 2013] Offset between fit and detection position for source 30 = 2.240504 pixels
[Mon Jun 24 16:12:33 2013] Warning, changing simple spatial fit ID from 64 to 66
[Mon Jun 24 16:12:33 2013] 1649.516000 total counts/ 1072.430000 bgd. counts: snr = 17.622035
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 2.240504 pixels
  Position = (269.9, 453.2) = 20 57 36.22 31 10 12.1
  Extent = 23.9 (23.9-47.8)", rotation angle = 0
  Source counts = 577.1 +/- 40.6
  Background counts = 1072.4
  Rate = 0.05 +/- 0.004
[Mon Jun 24 16:12:33 2013] Vigneting correction estimate = 1.000000
[Mon Jun 24 16:12:33 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 24 16:12:33 2013] Assessing source extent using major axis lower bound
[Mon Jun 24 16:12:33 2013] Source does appear to be extended
[Mon Jun 24 16:12:33 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 24 22:42:27 2013] XMMSAS src. selection expression = ellipse(23434.962000, 39377.230000, 1434.096041, 1434.096041, 0.000000, X, Y)
[Mon Jun 24 22:42:27 2013] Not overwriting source region fullrun_mos2_xmm0018141301_pi300-10000_pass1_cl_src30_src.reg
[Mon Jun 24 22:42:27 2013] Extracting stamp from image fullrun_mos2_xmm0018141301_pi300-10000_cl_sm2.00.img.gz, (188, 371) - (352, 536)
[Mon Jun 24 22:42:27 2013] XMMSAS bgd. selection expression = annulus(23434.962000, 39377.230000, 2390.160069, 4780.320138, X, Y) && !ellipse(23987.304000, 37157.692000, 1838.760053, 1838.760053, 0.000000, X, Y) && !ellipse(27750.195709, 39519.783936, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28275.108276, 39823.938782, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22414.708000, 38165.442000, 1912.128055, 1912.128055, 0.000000, X, Y) && !ellipse(23009.978088, 38846.492401, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22374.239288, 38555.132141, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28054.103600, 38115.058000, 956.736028, 956.736028, 0.000000, X, Y) && !ellipse(28356.997345, 39437.151459, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28321.389000, 38995.756000, 1943.872056, 1943.872056, 0.000000, X, Y) && !ellipse(27975.541200, 37908.856000, 1913.472055, 1913.472055, 0.000000, X, Y) && !ellipse(26884.828735, 38943.374420, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21458.694000, 39823.780000, 2004.992058, 2004.992058, 0.000000, X, Y) && !ellipse(24018.202000, 39426.778000, 1918.808055, 1918.808055, 0.000000, X, Y) && !ellipse(22175.794434, 38073.809845, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21216.358444, 40305.170807, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23376.279205, 37805.750122, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25546.402000, 37478.858000, 1780.304051, 1780.304051, 0.000000, X, Y) && !ellipse(27247.075623, 37591.728210, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23314.117004, 38478.361969, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 24 22:42:27 2013] Writing fullrun_mos2_xmm0018141301_pi300-10000_pass1_cl_src30.gif
[Mon Jun 24 23:04:54 2013] Mean detx,y = (5443.72, 11312.01) 
[Mon Jun 24 23:04:56 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 24 23:05:15 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 24 23:05:16 2013] Setting source spectrum file to fullrun_mos2_xmm0018141301_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Mon Jun 24 23:05:16 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0018141301_pi300-10000_pass1_cl_src30_bgd.pi.gz