[Mon Jun 24 16:07:33 2013] Detection parameters:
  Position = (396.9, 230.3) = 20 56 53.27 30 53 56.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 118.8 +/- 22.5
  Background counts = 186.5
  Rate = 0.02 +/- 0.003

[Mon Jun 24 16:07:34 2013] Off-axis axis estimate = 8.68'
[Mon Jun 24 16:08:57 2013] Using EEF radius (= 10.77 ")to estimate initial spatial extent for simple fitting
[Mon Jun 24 16:08:57 2013] Initial guess for spatial extent in simple fitting = 10.77"
[Mon Jun 24 16:08:57 2013] source mask rpix=2.5, npix_max = 35, mask sum = 30, frac = 0.847
[Mon Jun 24 16:08:57 2013] Giving source the simple spatial ID 56 for pass 0, mean size = 10.77"
[Mon Jun 24 16:08:59 2013] fullrun_mos2_xmm0018141301_pi300-10000_cl_pass0_src56.ximg exists
[Mon Jun 24 16:08:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018141301_pi300-10000_cl_pass0_src56.csv
[Mon Jun 24 16:08:59 2013] fullrun_mos2_xmm0018141301_pi300-10000_cl_pass0_src56_1.ximg exists
[Mon Jun 24 16:08:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018141301_pi300-10000_cl_pass0_src56.csv
[Mon Jun 24 16:08:59 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018141301_pi300-10000_cl_pass0_src56_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018141301_pi300-10000_cl_pass0_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 24 16:09:02 2013] fullrun_mos2_xmm0018141301_pi300-10000_cl_pass0_tfrozen_src56.ximg exists
[Mon Jun 24 16:09:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018141301_pi300-10000_cl_pass0_tfrozen_src56.csv
[Mon Jun 24 16:09:02 2013] fullrun_mos2_xmm0018141301_pi300-10000_cl_pass0_tfrozen_src56_1.ximg exists
[Mon Jun 24 16:09:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018141301_pi300-10000_cl_pass0_tfrozen_src56.csv
[Mon Jun 24 16:09:02 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018141301_pi300-10000_cl_pass0_tfrozen_src56_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018141301_pi300-10000_cl_pass0_tfrozen_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 24 16:10:18 2013] Warning, spatial fit 56 centroid is now closest to src. 88
[Mon Jun 24 16:10:18 2013] Source 132 is offset by -3.371891 and 1.775510 pixels which is larger than
2 X fitted extent = 0.863251 x 0.863251, not incorporating fit results
[Mon Jun 24 16:10:18 2013] Vigneting correction estimate = 1.000000
[Mon Jun 24 16:10:18 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 24 16:10:18 2013] Assessing source extent using major
[Mon Jun 24 16:10:18 2013] Source does appear to be extended
[Mon Jun 24 16:10:18 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 24 16:10:18 2013] Source is confused with source 83
[Mon Jun 24 16:11:13 2013] Using EEF radius (= 10.77 ")to estimate initial spatial extent for simple fitting
[Mon Jun 24 16:11:13 2013] Initial guess for spatial extent in simple fitting = 10.77"
[Mon Jun 24 16:11:13 2013] source mask rpix=2.5, npix_max = 35, mask sum = 30, frac = 0.847
[Mon Jun 24 16:11:13 2013] Giving source the simple spatial ID 48 for pass 1, mean size = 10.77"
[Mon Jun 24 16:11:15 2013] fullrun_mos2_xmm0018141301_pi300-10000_cl_pass1_src48.ximg exists
[Mon Jun 24 16:11:15 2013] fullrun_mos2_xmm0018141301_pi300-10000_cl_pass1_src48_1.ximg exists
[Mon Jun 24 16:11:15 2013] Fit fullrun_mos2_xmm0018141301_pi300-10000_cl_pass1_src48 appears to have run properly
[Mon Jun 24 16:11:18 2013] fullrun_mos2_xmm0018141301_pi300-10000_cl_pass1_tfrozen_src48.ximg exists
[Mon Jun 24 16:11:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018141301_pi300-10000_cl_pass1_tfrozen_src48.csv
[Mon Jun 24 16:11:18 2013] fullrun_mos2_xmm0018141301_pi300-10000_cl_pass1_tfrozen_src48_1.ximg exists
[Mon Jun 24 16:11:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018141301_pi300-10000_cl_pass1_tfrozen_src48.csv
[Mon Jun 24 16:11:18 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018141301_pi300-10000_cl_pass1_tfrozen_src48_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018141301_pi300-10000_cl_pass1_tfrozen_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 24 16:12:33 2013] Spatial fit model total counts = 4643.090000, observed total counts = 4593.000000
[Mon Jun 24 16:12:33 2013] Offset between fit and detection position for source 132 = 4.790369 pixels
[Mon Jun 24 16:12:33 2013] Warning, changing simple spatial fit ID from 48 to 35
[Mon Jun 24 16:12:33 2013] 4419.721000 total counts/ 3749.070000 bgd. counts: snr = 10.953043
Spatial fit parameters:
  Offset between fit and detection position for source 132 = 4.790369 pixels
  Position = (400.9, 233.0) = 20 56 51.92 30 54 13.9
  Extent = 27.6 (27.5-55.1)", rotation angle = 0
  Source counts = 670.7 +/- 66.5
  Background counts = 3749.1
  Rate = 0.06 +/- 0.006
[Mon Jun 24 16:12:33 2013] Vigneting correction estimate = 1.000000
[Mon Jun 24 16:12:33 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 24 16:12:33 2013] Assessing source extent using major axis lower bound
[Mon Jun 24 16:12:33 2013] Source does appear to be extended
[Mon Jun 24 16:12:33 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 24 22:42:26 2013] XMMSAS src. selection expression = ellipse(34833.310000, 20218.966000, 1653.210048, 1653.210048, 0.000000, X, Y)
[Mon Jun 24 22:42:26 2013] Not overwriting source region fullrun_mos2_xmm0018141301_pi300-10000_pass1_cl_src132_src.reg
[Mon Jun 24 22:42:26 2013] Extracting stamp from image fullrun_mos2_xmm0018141301_pi300-10000_cl_sm2.00.img.gz, (306, 138) - (496, 328)
[Mon Jun 24 22:42:26 2013] XMMSAS bgd. selection expression = annulus(34833.310000, 20218.966000, 2755.350079, 5510.700159, X, Y) && !ellipse(32766.598000, 21003.858000, 642.814418, 642.814418, 0.000000, X, Y) && !ellipse(32575.874000, 22001.546000, 1582.048046, 1582.048046, 0.000000, X, Y) && !ellipse(33264.752625, 15262.358337, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33906.676000, 22435.328800, 1571.248045, 1571.248045, 0.000000, X, Y) && !ellipse(33230.306274, 20744.770813, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32970.710785, 15863.451660, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33090.821655, 20147.807388, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33656.647000, 20970.578000, 1665.488048, 1665.488048, 0.000000, X, Y) && !ellipse(34466.148000, 20602.540000, 1734.848050, 469.431214, 219.388000, X, Y) && !ellipse(35277.738000, 18244.037000, 1061.064031, 1061.064031, 0.000000, X, Y) && !ellipse(33778.659800, 19949.622000, 3380.464097, 3380.464097, 0.000000, X, Y) && !ellipse(35913.887756, 20480.117493, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39274.315857, 25655.884705, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35642.318085, 20049.990799, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38839.690216, 16469.191284, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31434.256200, 25808.140000, 1718.088049, 1718.088049, 0.000000, X, Y) && !ellipse(38251.014465, 26158.301208, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34357.767120, 19206.254349, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33861.537400, 18251.720200, 1699.728049, 1699.728049, 0.000000, X, Y) && !ellipse(38287.879547, 16284.014938, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38756.285126, 15961.653229, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33504.286713, 19402.668106, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38709.896454, 15432.604126, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38055.623800, 16556.576000, 1101.440032, 1101.440032, 0.000000, X, Y)
[Mon Jun 24 22:42:26 2013] Writing fullrun_mos2_xmm0018141301_pi300-10000_pass1_cl_src132.gif
[Mon Jun 24 22:59:18 2013] Mean detx,y = (-8342.62, -5898.93) 
[Mon Jun 24 22:59:19 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 24 22:59:50 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 24 22:59:50 2013] Setting source spectrum file to fullrun_mos2_xmm0018141301_pi300-10000_pass1_cl_src132_src_b10.pi.gz
[Mon Jun 24 22:59:50 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0018141301_pi300-10000_pass1_cl_src132_bgd.pi.gz