[Mon Jun 24 16:07:27 2013] Detection parameters:
  Position = (315.3, 316.9) = 20 57 20.87 31 0 19.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1376.9 +/- 48.6
  Background counts = 98.5
  Rate = 0.1 +/- 0.004

[Mon Jun 24 16:07:34 2013] Off-axis axis estimate = 1.81'
[Mon Jun 24 16:08:57 2013] Using EEF radius (= 7.34 ")to estimate initial spatial extent for simple fitting
[Mon Jun 24 16:08:57 2013] Initial guess for spatial extent in simple fitting = 7.34"
[Mon Jun 24 16:08:57 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.837
[Mon Jun 24 16:08:57 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 7.34"
[Mon Jun 24 16:08:58 2013] fullrun_mos2_xmm0018141301_pi300-10000_cl_pass0_src1.ximg exists
[Mon Jun 24 16:08:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018141301_pi300-10000_cl_pass0_src1.csv
[Mon Jun 24 16:08:58 2013] fullrun_mos2_xmm0018141301_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Jun 24 16:08:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018141301_pi300-10000_cl_pass0_src1.csv
[Mon Jun 24 16:08:58 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018141301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018141301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 24 16:09:00 2013] fullrun_mos2_xmm0018141301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Jun 24 16:09:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018141301_pi300-10000_cl_pass0_tfrozen_src1.csv
[Mon Jun 24 16:09:00 2013] fullrun_mos2_xmm0018141301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Jun 24 16:09:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018141301_pi300-10000_cl_pass0_tfrozen_src1.csv
[Mon Jun 24 16:09:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018141301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018141301_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 24 16:10:17 2013] Spatial fit model total counts = 6300.800000, observed total counts = 4829.000000
[Mon Jun 24 16:10:17 2013] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jun 24 16:10:17 2013] Spatial fit model total counts = 2614.250000, observed total counts = 2462.000000
[Mon Jun 24 16:10:17 2013] Offset between fit and detection position for source 1 = 4.529566 pixels
[Mon Jun 24 16:10:17 2013] Warning, changing simple spatial fit ID from 1 to 50
[Mon Jun 24 16:10:17 2013] 2647.482000 total counts/ 2254.240000 bgd. counts: snr = 8.282469
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 4.529566 pixels
  Position = (315.2, 312.4) = 20 57 20.89 30 59 59.8
  Extent = 14.0 (13.9-27.9)", rotation angle = 0
  Source counts = 393.2 +/- 51.5
  Background counts = 2254.2
  Rate = 0.03 +/- 0.005
[Mon Jun 24 16:10:18 2013] Vigneting correction estimate = 1.000000
[Mon Jun 24 16:10:18 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 24 16:10:18 2013] Assessing source extent using major axis lower bound
[Mon Jun 24 16:10:18 2013] Source does appear to be extended
[Mon Jun 24 16:10:18 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 24 16:10:18 2013] Source is confused with source 79
[Mon Jun 24 16:11:13 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jun 24 16:11:13 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jun 24 16:11:13 2013] Initial guess for spatial extent in simple fitting = 13.96"
[Mon Jun 24 16:11:13 2013] source mask rpix=3.2, npix_max = 55, mask sum = 56, frac = 1.017
[Mon Jun 24 16:11:13 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 13.96"
[Mon Jun 24 16:11:14 2013] fullrun_mos2_xmm0018141301_pi300-10000_cl_pass1_src1.ximg exists
[Mon Jun 24 16:11:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018141301_pi300-10000_cl_pass1_src1.csv
[Mon Jun 24 16:11:14 2013] fullrun_mos2_xmm0018141301_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Jun 24 16:11:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018141301_pi300-10000_cl_pass1_src1.csv
[Mon Jun 24 16:11:14 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018141301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018141301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 24 16:11:17 2013] fullrun_mos2_xmm0018141301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Jun 24 16:11:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018141301_pi300-10000_cl_pass1_tfrozen_src1.csv
[Mon Jun 24 16:11:17 2013] fullrun_mos2_xmm0018141301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Jun 24 16:11:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018141301_pi300-10000_cl_pass1_tfrozen_src1.csv
[Mon Jun 24 16:11:17 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018141301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018141301_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 24 16:12:33 2013] Warning, spatial fit 1 centroid is now closest to src. 79
[Mon Jun 24 16:12:33 2013] Spatial fit model total counts = 3808.990000, observed total counts = 3445.000000
[Mon Jun 24 16:12:33 2013] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jun 24 16:12:33 2013] Spatial fit model total counts = 2618.080000, observed total counts = 2462.000000
[Mon Jun 24 16:12:33 2013] Offset between fit and detection position for source 1 = 0.001080 pixels
[Mon Jun 24 16:12:33 2013] Warning, changing simple spatial fit ID from 1 to 43
[Mon Jun 24 16:12:33 2013] 2645.468000 total counts/ 2249.100000 bgd. counts: snr = 8.357843
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.001080 pixels
  Position = (315.2, 312.4) = 20 57 20.89 30 59 59.8
  Extent = 14.0 (13.9-27.9)", rotation angle = 0
  Source counts = 396.4 +/- 51.4
  Background counts = 2249.1
  Rate = 0.03 +/- 0.005
[Mon Jun 24 16:12:33 2013] Vigneting correction estimate = 1.000000
[Mon Jun 24 16:12:33 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 24 16:12:33 2013] Assessing source extent using major axis lower bound
[Mon Jun 24 16:12:33 2013] Source does appear to be extended
[Mon Jun 24 16:12:33 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 24 22:42:23 2013] XMMSAS src. selection expression = ellipse(27373.370000, 27132.016000, 837.774024, 837.774024, 0.000000, X, Y)
[Mon Jun 24 22:42:23 2013] Not overwriting source region fullrun_mos2_xmm0018141301_pi300-10000_pass1_cl_src1_src.reg
[Mon Jun 24 22:42:23 2013] Extracting stamp from image fullrun_mos2_xmm0018141301_pi300-10000_cl_sm2.00.img.gz, (267, 264) - (363, 361)
[Mon Jun 24 22:42:23 2013] XMMSAS bgd. selection expression = annulus(27373.370000, 27132.016000, 1396.290040, 2792.580080, X, Y) && !ellipse(27162.986000, 30487.986000, 683.629620, 683.629620, 0.000000, X, Y) && !ellipse(27779.129760, 29615.604000, 1008.704029, 1008.704029, 0.000000, X, Y) && !ellipse(29976.952000, 28266.600000, 965.192028, 965.192028, 0.000000, X, Y) && !ellipse(29748.217200, 27603.055000, 713.353621, 713.353621, 0.000000, X, Y) && !ellipse(29001.516327, 30575.555756, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29115.207336, 27705.617767, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29591.726000, 28785.754000, 1341.096039, 1341.096039, 0.000000, X, Y) && !ellipse(28608.402069, 29611.503998, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29226.222076, 29794.432861, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27890.527283, 30412.404205, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30407.492000, 27339.668000, 1077.472031, 1077.472031, 0.000000, X, Y) && !ellipse(29501.419000, 29840.304000, 1764.600051, 1764.600051, 0.000000, X, Y) && !ellipse(29619.014000, 30487.986000, 1393.032040, 1393.032040, 0.000000, X, Y) && !ellipse(29014.810059, 29096.383179, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28094.969849, 26582.383728, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29647.514000, 29614.478000, 1402.896040, 1402.896040, 0.000000, X, Y) && !ellipse(30574.260101, 28743.564301, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30265.233276, 30237.246613, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30814.550200, 29568.108000, 1423.752041, 1423.752041, 0.000000, X, Y) && !ellipse(27112.011627, 26489.189545, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30901.330505, 29884.334808, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30928.565796, 29093.364410, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31434.256200, 25808.140000, 1718.088049, 1718.088049, 0.000000, X, Y) && !ellipse(29227.438080, 26670.071381, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26597.293000, 23466.874600, 892.744026, 892.744026, 0.000000, X, Y)
[Mon Jun 24 22:42:23 2013] Writing fullrun_mos2_xmm0018141301_pi300-10000_pass1_cl_src1.gif
[Mon Jun 24 22:42:29 2013] ../../xmm0018141301/products/events/fullrun_mos2_xmm0018141301_pi300-10000_pass1_cl_src1_src.evt and ../../xmm0018141301/products/events/fullrun_mos2_xmm0018141301_pi300-10000_pass1_cl_src1_bgd.evt exist, delete to re-create
[Mon Jun 24 22:42:29 2013] Mean detx,y = (-104.79, -87.07) 
[Mon Jun 24 22:42:29 2013] ../../xmm0018141301/products/images/fullrun_mos2_xmm0018141301_pi300-10000_pass1_cl_src1_src.img and ../../xmm0018141301/products/images/fullrun_mos2_xmm0018141301_pi300-10000_pass1_cl_src1_bgd.img exist, delete to re-create
[Mon Jun 24 22:42:29 2013] ../../xmm0018141301/products/spectra/fullrun_mos2_xmm0018141301_pi300-10000_pass1_cl_src1_src_b10.pi.gz and ../../xmm0018141301/products/spectra/fullrun_mos2_xmm0018141301_pi300-10000_pass1_cl_src1_bgd.pi exist, delete to re-create
[Mon Jun 24 22:42:29 2013] Setting source spectrum file to fullrun_mos2_xmm0018141301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Jun 24 22:42:29 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0018141301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Jun 24 22:42:29 2013] ../../xmm0018141301/products/lightcurves/fullrun_mos2_xmm0018141301_pi300-10000_pass1_cl_src1_src.lc and ../../xmm0018141301/products/lightcurves/fullrun_mos2_xmm0018141301_pi300-10000_pass1_cl_src1_bgd.lc exist, delete to re-create