[Mon Jun 24 16:07:23 2013] Detection parameters:
  Position = (408.9, 206.3) = 20 56 49.25 30 52 17.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 150.1 +/- 24.3
  Background counts = 165.4
  Rate = 0.03 +/- 0.004

[Mon Jun 24 16:07:27 2013] Off-axis axis estimate = 10.43'
[Mon Jun 24 16:08:51 2013] Using EEF radius (= 11.64 ")to estimate initial spatial extent for simple fitting
[Mon Jun 24 16:08:51 2013] Initial guess for spatial extent in simple fitting = 11.64"
[Mon Jun 24 16:08:51 2013] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.892
[Mon Jun 24 16:08:51 2013] Giving source the simple spatial ID 36 for pass 0, mean size = 11.64"
[Mon Jun 24 16:08:53 2013] fullrun_mos1_xmm0018141301_pi300-10000_cl_pass0_src36.ximg exists
[Mon Jun 24 16:08:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018141301_pi300-10000_cl_pass0_src36.csv
[Mon Jun 24 16:08:53 2013] fullrun_mos1_xmm0018141301_pi300-10000_cl_pass0_src36_1.ximg exists
[Mon Jun 24 16:08:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018141301_pi300-10000_cl_pass0_src36.csv
[Mon Jun 24 16:08:53 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0018141301_pi300-10000_cl_pass0_src36_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0018141301_pi300-10000_cl_pass0_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 24 16:08:55 2013] fullrun_mos1_xmm0018141301_pi300-10000_cl_pass0_tfrozen_src36.ximg exists
[Mon Jun 24 16:08:55 2013] fullrun_mos1_xmm0018141301_pi300-10000_cl_pass0_tfrozen_src36_1.ximg exists
[Mon Jun 24 16:08:55 2013] Fit fullrun_mos1_xmm0018141301_pi300-10000_cl_pass0_tfrozen_src36 appears to have run properly
[Mon Jun 24 16:09:55 2013] Warning: source 36 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 75 at 14.013941 pixels away
[Mon Jun 24 16:09:55 2013] Source 75 is offset by 1.758858 and 4.585305 pixels which is larger than
2 X fitted extent = 1.293228 x 1.293228, not incorporating fit results
[Mon Jun 24 16:09:56 2013] Vigneting correction estimate = 1.000000
[Mon Jun 24 16:09:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 24 16:09:56 2013] Assessing source extent using major
[Mon Jun 24 16:09:56 2013] Source does appear to be extended
[Mon Jun 24 16:09:56 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 24 16:09:56 2013] Source is confused with source 147
[Mon Jun 24 16:11:01 2013] Using EEF radius (= 11.64 ")to estimate initial spatial extent for simple fitting
[Mon Jun 24 16:11:01 2013] Initial guess for spatial extent in simple fitting = 11.64"
[Mon Jun 24 16:11:01 2013] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.892
[Mon Jun 24 16:11:01 2013] Giving source the simple spatial ID 34 for pass 1, mean size = 11.64"
[Mon Jun 24 16:11:04 2013] fullrun_mos1_xmm0018141301_pi300-10000_cl_pass1_src34.ximg exists
[Mon Jun 24 16:11:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018141301_pi300-10000_cl_pass1_src34.csv
[Mon Jun 24 16:11:04 2013] fullrun_mos1_xmm0018141301_pi300-10000_cl_pass1_src34_1.ximg exists
[Mon Jun 24 16:11:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018141301_pi300-10000_cl_pass1_src34.csv
[Mon Jun 24 16:11:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0018141301_pi300-10000_cl_pass1_src34_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0018141301_pi300-10000_cl_pass1_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 24 16:11:09 2013] fullrun_mos1_xmm0018141301_pi300-10000_cl_pass1_tfrozen_src34.ximg exists
[Mon Jun 24 16:11:09 2013] fullrun_mos1_xmm0018141301_pi300-10000_cl_pass1_tfrozen_src34_1.ximg exists
[Mon Jun 24 16:11:09 2013] Fit fullrun_mos1_xmm0018141301_pi300-10000_cl_pass1_tfrozen_src34 appears to have run properly
[Mon Jun 24 16:12:11 2013] Warning: source 34 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 75 at 10.688245 pixels away
[Mon Jun 24 16:12:11 2013] Warning: source 40 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 75 at 13.973953 pixels away
[Mon Jun 24 16:12:11 2013] Vigneting correction estimate = 1.000000
[Mon Jun 24 16:12:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 24 16:12:11 2013] Assessing source extent using major
[Mon Jun 24 16:12:11 2013] Source does appear to be extended
[Mon Jun 24 16:12:11 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 24 16:13:38 2013] XMMSAS src. selection expression = ellipse(35521.580627, 17895.969513, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun 24 16:13:38 2013] Not overwriting source region fullrun_mos1_xmm0018141301_pi300-10000_pass1_cl_src75_src.reg
[Mon Jun 24 16:13:38 2013] Extracting stamp from image fullrun_mos1_xmm0018141301_pi300-10000_cl_sm2.00.img.gz, (371, 169) - (446, 244)
[Mon Jun 24 16:13:38 2013] XMMSAS bgd. selection expression = annulus(35521.580627, 17895.969513, 1087.500000, 2175.000000, X, Y) && !ellipse(32697.771118, 20825.770447, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32712.817200, 21404.220000, 1593.880046, 1071.472031, 30.249000, X, Y) && !ellipse(33631.120000, 20607.372000, 1658.632048, 1658.632048, 0.000000, X, Y) && !ellipse(33523.697632, 19971.516098, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32683.407700, 21614.612000, 1593.880046, 1593.880046, 0.000000, X, Y) && !ellipse(32974.918000, 21424.698000, 3309.392095, 3309.392095, 0.000000, X, Y) && !ellipse(33680.795715, 16485.405548, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35178.470000, 21194.988800, 1768.904051, 1768.904051, 0.000000, X, Y) && !ellipse(33895.359253, 19449.571854, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34251.337616, 20402.127335, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34482.670319, 19952.113144, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36083.368000, 18802.836000, 1811.328052, 1811.328052, 0.000000, X, Y) && !ellipse(34578.256683, 18301.777466, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35957.241730, 20479.492233, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35273.766000, 20432.162000, 1811.328052, 1811.328052, 0.000000, X, Y) && !ellipse(33166.890900, 15271.173035, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35728.988861, 19469.286774, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34043.568298, 17097.375198, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33172.074000, 16125.840000, 1842.960053, 1842.960053, 0.000000, X, Y)
[Mon Jun 24 16:13:38 2013] Writing fullrun_mos1_xmm0018141301_pi300-10000_pass1_cl_src75.gif
[Mon Jun 24 16:13:43 2013] ../../xmm0018141301/products/events/fullrun_mos1_xmm0018141301_pi300-10000_pass1_cl_src75_src.evt and ../../xmm0018141301/products/events/fullrun_mos1_xmm0018141301_pi300-10000_pass1_cl_src75_bgd.evt exist, delete to re-create
[Mon Jun 24 16:13:43 2013] Mean detx,y = (-8058.11, 9223.82) 
[Mon Jun 24 16:13:43 2013] ../../xmm0018141301/products/images/fullrun_mos1_xmm0018141301_pi300-10000_pass1_cl_src75_src.img and ../../xmm0018141301/products/images/fullrun_mos1_xmm0018141301_pi300-10000_pass1_cl_src75_bgd.img exist, delete to re-create
[Mon Jun 24 16:13:43 2013] ../../xmm0018141301/products/spectra/fullrun_mos1_xmm0018141301_pi300-10000_pass1_cl_src75_src_b10.pi.gz and ../../xmm0018141301/products/spectra/fullrun_mos1_xmm0018141301_pi300-10000_pass1_cl_src75_bgd.pi exist, delete to re-create
[Mon Jun 24 16:13:43 2013] Setting source spectrum file to fullrun_mos1_xmm0018141301_pi300-10000_pass1_cl_src75_src_b10.pi.gz
[Mon Jun 24 16:13:43 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0018141301_pi300-10000_pass1_cl_src75_bgd.pi.gz
[Mon Jun 24 16:13:43 2013] ../../xmm0018141301/products/lightcurves/fullrun_mos1_xmm0018141301_pi300-10000_pass1_cl_src75_src.lc and ../../xmm0018141301/products/lightcurves/fullrun_mos1_xmm0018141301_pi300-10000_pass1_cl_src75_bgd.lc exist, delete to re-create
[Mon Jun 24 22:42:23 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jun 24 22:42:23 2013] rmf not generated due to insufficient counts
[Mon Jun 24 22:42:23 2013] fullrun_mos1_xmm0018141301_pi300-10000_pass1_cl_src75.arf exists, delete to re-create