[Mon Jun 24 16:07:21 2013] Detection parameters:
  Position = (266.4, 448.9) = 20 57 37.41 31 9 53.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 284.6 +/- 26.0
  Background counts = 82.0
  Rate = 0.03 +/- 0.002

[Mon Jun 24 16:07:27 2013] Off-axis axis estimate = 11.15'
[Mon Jun 24 16:08:51 2013] Using EEF radius (= 12.00 ")to estimate initial spatial extent for simple fitting
[Mon Jun 24 16:08:51 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jun 24 16:08:51 2013] Initial guess for spatial extent in simple fitting = 12.00"
[Mon Jun 24 16:08:51 2013] source mask rpix=2.8, npix_max = 42, mask sum = 42, frac = 0.988
[Mon Jun 24 16:08:51 2013] Giving source the simple spatial ID 40 for pass 0, mean size = 12.00"
[Mon Jun 24 16:08:53 2013] fullrun_mos1_xmm0018141301_pi300-10000_cl_pass0_src40.ximg exists
[Mon Jun 24 16:08:53 2013] fullrun_mos1_xmm0018141301_pi300-10000_cl_pass0_src40_1.ximg exists
[Mon Jun 24 16:08:53 2013] Fit fullrun_mos1_xmm0018141301_pi300-10000_cl_pass0_src40 appears to have run properly
[Mon Jun 24 16:08:56 2013] fullrun_mos1_xmm0018141301_pi300-10000_cl_pass0_tfrozen_src40.ximg exists
[Mon Jun 24 16:08:56 2013] fullrun_mos1_xmm0018141301_pi300-10000_cl_pass0_tfrozen_src40_1.ximg exists
[Mon Jun 24 16:08:56 2013] Fit fullrun_mos1_xmm0018141301_pi300-10000_cl_pass0_tfrozen_src40 appears to have run properly
[Mon Jun 24 16:09:55 2013] Warning, spatial fit 40 centroid is now closest to src. 84
[Mon Jun 24 16:09:56 2013] Spatial fit model total counts = 2523.830000, observed total counts = 2523.000000
[Mon Jun 24 16:09:56 2013] Offset between fit and detection position for source 31 = 1.666863 pixels
[Mon Jun 24 16:09:56 2013] Warning, changing simple spatial fit ID from 40 to 84
[Mon Jun 24 16:09:56 2013] 2505.322000 total counts/ 2008.320000 bgd. counts: snr = 11.090259
Spatial fit parameters:
  Offset between fit and detection position for source 31 = 1.666863 pixels
  Position = (265.7, 450.4) = 20 57 37.65 31 9 60.0
  Extent = 24.1 (24.0-48.1)", rotation angle = 0
  Source counts = 497.0 +/- 50.1
  Background counts = 2008.3
  Rate = 0.04 +/- 0.004
[Mon Jun 24 16:09:56 2013] Vigneting correction estimate = 1.000000
[Mon Jun 24 16:09:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 24 16:09:56 2013] Assessing source extent using major axis lower bound
[Mon Jun 24 16:09:56 2013] Source does appear to be extended
[Mon Jun 24 16:09:56 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 24 16:09:56 2013] Source is confused with source 16
[Mon Jun 24 16:09:56 2013] Source is confused with source 11
[Mon Jun 24 16:09:56 2013] Source is confused with source 35
[Mon Jun 24 16:09:56 2013] Source is confused with source 33
[Mon Jun 24 16:09:56 2013] Source is confused with source 50
[Mon Jun 24 16:09:56 2013] Source is confused with source 86
[Mon Jun 24 16:09:56 2013] Source is confused with source 84
[Mon Jun 24 16:11:01 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jun 24 16:11:01 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jun 24 16:11:01 2013] Initial guess for spatial extent in simple fitting = 24.05"
[Mon Jun 24 16:11:01 2013] source mask rpix=5.5, npix_max = 145, mask sum = 144, frac = 0.990
[Mon Jun 24 16:11:01 2013] Giving source the simple spatial ID 37 for pass 1, mean size = 24.05"
[Mon Jun 24 16:11:04 2013] fullrun_mos1_xmm0018141301_pi300-10000_cl_pass1_src37.ximg exists
[Mon Jun 24 16:11:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018141301_pi300-10000_cl_pass1_src37.csv
[Mon Jun 24 16:11:04 2013] fullrun_mos1_xmm0018141301_pi300-10000_cl_pass1_src37_1.ximg exists
[Mon Jun 24 16:11:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018141301_pi300-10000_cl_pass1_src37.csv
[Mon Jun 24 16:11:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0018141301_pi300-10000_cl_pass1_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0018141301_pi300-10000_cl_pass1_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 24 16:11:10 2013] fullrun_mos1_xmm0018141301_pi300-10000_cl_pass1_tfrozen_src37.ximg exists
[Mon Jun 24 16:11:10 2013] fullrun_mos1_xmm0018141301_pi300-10000_cl_pass1_tfrozen_src37_1.ximg exists
[Mon Jun 24 16:11:10 2013] Fit fullrun_mos1_xmm0018141301_pi300-10000_cl_pass1_tfrozen_src37 appears to have run properly
[Mon Jun 24 16:12:11 2013] Warning, spatial fit 37 centroid is now closest to src. 84
[Mon Jun 24 16:12:11 2013] Source 31 is offset by 1.984484 and 2.729708 pixels which is larger than
2 X fitted extent = 7.332958 x 1.382271, not incorporating fit results
[Mon Jun 24 16:12:11 2013] Vigneting correction estimate = 1.000000
[Mon Jun 24 16:12:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 24 16:12:11 2013] Assessing source extent using major axis lower bound
[Mon Jun 24 16:12:11 2013] Source does appear to be extended
[Mon Jun 24 16:12:11 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 24 16:13:38 2013] XMMSAS src. selection expression = ellipse(23067.568000, 39135.204600, 1443.090042, 1443.090042, 0.000000, X, Y)
[Mon Jun 24 16:13:38 2013] Not overwriting source region fullrun_mos1_xmm0018141301_pi300-10000_pass1_cl_src31_src.reg
[Mon Jun 24 16:13:38 2013] Extracting stamp from image fullrun_mos1_xmm0018141301_pi300-10000_cl_sm2.00.img.gz, (183, 367) - (349, 533)
[Mon Jun 24 16:13:38 2013] XMMSAS bgd. selection expression = annulus(23067.568000, 39135.204600, 2405.150069, 4810.300138, X, Y) && !ellipse(23962.078000, 36917.208600, 595.493617, 595.493617, 0.000000, X, Y) && !ellipse(27334.548000, 37501.050000, 1823.992052, 1823.992052, 0.000000, X, Y) && !ellipse(28149.597076, 38577.044098, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27014.869415, 37977.172089, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27488.141663, 38324.699493, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22791.161194, 38138.393433, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23787.893707, 38585.086182, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23640.765259, 38062.648102, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21572.237244, 39623.603546, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23812.232361, 39183.086395, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27714.445740, 39777.961639, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22306.921021, 38310.163208, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27122.724670, 38748.282867, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21113.744217, 40317.537933, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24403.830000, 38826.368000, 1884.568054, 1884.568054, 0.000000, X, Y) && !ellipse(20458.370000, 40856.108000, 2040.664059, 2040.664059, 0.000000, X, Y) && !ellipse(21394.194962, 40831.697632, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23418.398590, 39862.322540, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25610.316437, 37690.203247, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 24 16:13:38 2013] Writing fullrun_mos1_xmm0018141301_pi300-10000_pass1_cl_src31.gif
[Mon Jun 24 16:13:43 2013] ../../xmm0018141301/products/events/fullrun_mos1_xmm0018141301_pi300-10000_pass1_cl_src31_src.evt and ../../xmm0018141301/products/events/fullrun_mos1_xmm0018141301_pi300-10000_pass1_cl_src31_bgd.evt exist, delete to re-create
[Mon Jun 24 16:13:43 2013] Mean detx,y = (11284.18, -5760.09) 
[Mon Jun 24 16:13:43 2013] ../../xmm0018141301/products/images/fullrun_mos1_xmm0018141301_pi300-10000_pass1_cl_src31_src.img and ../../xmm0018141301/products/images/fullrun_mos1_xmm0018141301_pi300-10000_pass1_cl_src31_bgd.img exist, delete to re-create
[Mon Jun 24 16:13:43 2013] ../../xmm0018141301/products/spectra/fullrun_mos1_xmm0018141301_pi300-10000_pass1_cl_src31_src_b10.pi.gz and ../../xmm0018141301/products/spectra/fullrun_mos1_xmm0018141301_pi300-10000_pass1_cl_src31_bgd.pi exist, delete to re-create
[Mon Jun 24 16:13:43 2013] Setting source spectrum file to fullrun_mos1_xmm0018141301_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Mon Jun 24 16:13:43 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0018141301_pi300-10000_pass1_cl_src31_bgd.pi.gz
[Mon Jun 24 16:13:43 2013] ../../xmm0018141301/products/lightcurves/fullrun_mos1_xmm0018141301_pi300-10000_pass1_cl_src31_src.lc and ../../xmm0018141301/products/lightcurves/fullrun_mos1_xmm0018141301_pi300-10000_pass1_cl_src31_bgd.lc exist, delete to re-create
[Mon Jun 24 22:42:23 2013] fullrun_mos1_xmm0018141301_pi300-10000_pass1_cl_src31.rmf exists, delete to re-create
[Mon Jun 24 22:42:23 2013] fullrun_mos1_xmm0018141301_pi300-10000_pass1_cl_src31.arf exists, delete to re-create