[Mon Jun 24 16:07:21 2013] Detection parameters:
  Position = (387.5, 236.1) = 20 56 56.46 30 54 27.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 286.8 +/- 30.1
  Background counts = 187.1
  Rate = 0.04 +/- 0.004

[Mon Jun 24 16:07:27 2013] Off-axis axis estimate = 7.88'
[Mon Jun 24 16:08:51 2013] Using EEF radius (= 10.37 ")to estimate initial spatial extent for simple fitting
[Mon Jun 24 16:08:51 2013] Initial guess for spatial extent in simple fitting = 10.37"
[Mon Jun 24 16:08:51 2013] source mask rpix=2.4, npix_max = 33, mask sum = 30, frac = 0.902
[Mon Jun 24 16:08:51 2013] Giving source the simple spatial ID 17 for pass 0, mean size = 10.37"
[Mon Jun 24 16:08:52 2013] fullrun_mos1_xmm0018141301_pi300-10000_cl_pass0_src17.ximg exists
[Mon Jun 24 16:08:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018141301_pi300-10000_cl_pass0_src17.csv
[Mon Jun 24 16:08:52 2013] fullrun_mos1_xmm0018141301_pi300-10000_cl_pass0_src17_1.ximg exists
[Mon Jun 24 16:08:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018141301_pi300-10000_cl_pass0_src17.csv
[Mon Jun 24 16:08:52 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0018141301_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0018141301_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 24 16:08:55 2013] fullrun_mos1_xmm0018141301_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Mon Jun 24 16:08:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018141301_pi300-10000_cl_pass0_tfrozen_src17.csv
[Mon Jun 24 16:08:55 2013] fullrun_mos1_xmm0018141301_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Mon Jun 24 16:08:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018141301_pi300-10000_cl_pass0_tfrozen_src17.csv
[Mon Jun 24 16:08:55 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0018141301_pi300-10000_cl_pass0_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0018141301_pi300-10000_cl_pass0_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 24 16:09:55 2013] Warning, spatial fit 17 centroid is now closest to src. 26
[Mon Jun 24 16:09:55 2013] Source 27 is offset by 0.720373 and 1.272643 pixels which is larger than
2 X fitted extent = 1.231430 x 1.231430, not incorporating fit results
[Mon Jun 24 16:09:55 2013] Spatial fit model total counts = 2978.370000, observed total counts = 2979.000000
[Mon Jun 24 16:09:55 2013] Offset between fit and detection position for source 27 = 0.806185 pixels
[Mon Jun 24 16:09:55 2013] Warning, changing simple spatial fit ID from 17 to 42
[Mon Jun 24 16:09:55 2013] 2941.081000 total counts/ 2653.290000 bgd. counts: snr = 5.587079
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 0.806185 pixels
  Position = (387.1, 236.8) = 20 56 56.58 30 54 30.8
  Extent = 20.7 (18.9-21.6)", rotation angle = 0
  Source counts = 287.8 +/- 54.2
  Background counts = 2653.3
  Rate = 0.03 +/- 0.005
[Mon Jun 24 16:09:56 2013] Vigneting correction estimate = 1.000000
[Mon Jun 24 16:09:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 24 16:09:56 2013] Assessing source extent using major axis lower bound
[Mon Jun 24 16:09:56 2013] Source does appear to be extended
[Mon Jun 24 16:09:56 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 24 16:09:56 2013] Source is confused with source 1
[Mon Jun 24 16:11:01 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jun 24 16:11:01 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jun 24 16:11:01 2013] Initial guess for spatial extent in simple fitting = 20.68"
[Mon Jun 24 16:11:01 2013] source mask rpix=4.8, npix_max = 110, mask sum = 89, frac = 0.806
[Mon Jun 24 16:11:01 2013] Giving source the simple spatial ID 17 for pass 1, mean size = 20.68"
[Mon Jun 24 16:11:03 2013] fullrun_mos1_xmm0018141301_pi300-10000_cl_pass1_src17.ximg exists
[Mon Jun 24 16:11:03 2013] fullrun_mos1_xmm0018141301_pi300-10000_cl_pass1_src17_1.ximg exists
[Mon Jun 24 16:11:03 2013] Fit fullrun_mos1_xmm0018141301_pi300-10000_cl_pass1_src17 appears to have run properly
[Mon Jun 24 16:11:08 2013] fullrun_mos1_xmm0018141301_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Mon Jun 24 16:11:08 2013] fullrun_mos1_xmm0018141301_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Mon Jun 24 16:11:08 2013] Fit fullrun_mos1_xmm0018141301_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly
[Mon Jun 24 16:12:10 2013] Warning, spatial fit 17 centroid is now closest to src. 66
[Mon Jun 24 16:12:11 2013] Spatial fit model total counts = 2979.300000, observed total counts = 2979.000000
[Mon Jun 24 16:12:11 2013] Offset between fit and detection position for source 27 = 0.585944 pixels
[Mon Jun 24 16:12:11 2013] Warning, changing simple spatial fit ID from 17 to 39
[Mon Jun 24 16:12:11 2013] 2917.101000 total counts/ 2648.650000 bgd. counts: snr = 5.216182
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 0.585944 pixels
  Position = (387.1, 237.4) = 20 56 56.58 30 54 33.4
  Extent = 20.7 (19.1-21.6)", rotation angle = 0
  Source counts = 268.5 +/- 54.0
  Background counts = 2648.7
  Rate = 0.02 +/- 0.005
[Mon Jun 24 16:12:11 2013] Vigneting correction estimate = 1.000000
[Mon Jun 24 16:12:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 24 16:12:11 2013] Assessing source extent using major axis lower bound
[Mon Jun 24 16:12:11 2013] Source does appear to be extended
[Mon Jun 24 16:12:11 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 24 16:13:37 2013] XMMSAS src. selection expression = ellipse(33631.120000, 20607.372000, 1243.974036, 1243.974036, 0.000000, X, Y)
[Mon Jun 24 16:13:37 2013] Not overwriting source region fullrun_mos1_xmm0018141301_pi300-10000_pass1_cl_src27_src.reg
[Mon Jun 24 16:13:37 2013] Extracting stamp from image fullrun_mos1_xmm0018141301_pi300-10000_cl_sm2.00.img.gz, (316, 166) - (459, 309)
[Mon Jun 24 16:13:37 2013] XMMSAS bgd. selection expression = annulus(33631.120000, 20607.372000, 2073.290060, 4146.580119, X, Y) && !ellipse(32697.771118, 20825.770447, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33887.770000, 21134.868000, 952.472027, 952.472027, 0.000000, X, Y) && !ellipse(32712.817200, 21404.220000, 1593.880046, 1071.472031, 30.249000, X, Y) && !ellipse(33523.697632, 19971.516098, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32683.407700, 21614.612000, 1593.880046, 1593.880046, 0.000000, X, Y) && !ellipse(31620.888580, 25410.846741, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34032.791400, 21001.414000, 620.312818, 620.312818, 0.000000, X, Y) && !ellipse(32974.918000, 21424.698000, 3309.392095, 3309.392095, 0.000000, X, Y) && !ellipse(34463.771820, 21425.877426, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33680.795715, 16485.405548, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35178.470000, 21194.988800, 1768.904051, 1768.904051, 0.000000, X, Y) && !ellipse(35521.580627, 17895.969513, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33895.359253, 19449.571854, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34251.337616, 20402.127335, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34482.670319, 19952.113144, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36083.368000, 18802.836000, 1811.328052, 1811.328052, 0.000000, X, Y) && !ellipse(34578.256683, 18301.777466, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35957.241730, 20479.492233, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35273.766000, 20432.162000, 1811.328052, 1811.328052, 0.000000, X, Y) && !ellipse(35728.988861, 19469.286774, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33702.609220, 22372.317211, 1209.031473, 1150.299938, 273.701255, X, Y) && !ellipse(38516.018250, 25102.550049, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35848.789093, 20950.465225, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34043.568298, 17097.375198, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38057.176000, 26850.414000, 3481.296100, 3481.296100, 0.000000, X, Y) && !ellipse(33172.074000, 16125.840000, 1842.960053, 1842.960053, 0.000000, X, Y)
[Mon Jun 24 16:13:37 2013] Writing fullrun_mos1_xmm0018141301_pi300-10000_pass1_cl_src27.gif
[Mon Jun 24 16:13:42 2013] ../../xmm0018141301/products/events/fullrun_mos1_xmm0018141301_pi300-10000_pass1_cl_src27_src.evt and ../../xmm0018141301/products/events/fullrun_mos1_xmm0018141301_pi300-10000_pass1_cl_src27_bgd.evt exist, delete to re-create
[Mon Jun 24 16:13:42 2013] Mean detx,y = (-5572.35, 6988.39) 
[Mon Jun 24 16:13:42 2013] ../../xmm0018141301/products/images/fullrun_mos1_xmm0018141301_pi300-10000_pass1_cl_src27_src.img and ../../xmm0018141301/products/images/fullrun_mos1_xmm0018141301_pi300-10000_pass1_cl_src27_bgd.img exist, delete to re-create
[Mon Jun 24 16:13:42 2013] ../../xmm0018141301/products/spectra/fullrun_mos1_xmm0018141301_pi300-10000_pass1_cl_src27_src_b10.pi.gz and ../../xmm0018141301/products/spectra/fullrun_mos1_xmm0018141301_pi300-10000_pass1_cl_src27_bgd.pi exist, delete to re-create
[Mon Jun 24 16:13:42 2013] Setting source spectrum file to fullrun_mos1_xmm0018141301_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Mon Jun 24 16:13:42 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0018141301_pi300-10000_pass1_cl_src27_bgd.pi.gz
[Mon Jun 24 16:13:42 2013] ../../xmm0018141301/products/lightcurves/fullrun_mos1_xmm0018141301_pi300-10000_pass1_cl_src27_src.lc and ../../xmm0018141301/products/lightcurves/fullrun_mos1_xmm0018141301_pi300-10000_pass1_cl_src27_bgd.lc exist, delete to re-create
[Mon Jun 24 22:42:23 2013] fullrun_mos1_xmm0018141301_pi300-10000_pass1_cl_src27.rmf exists, delete to re-create
[Mon Jun 24 22:42:23 2013] fullrun_mos1_xmm0018141301_pi300-10000_pass1_cl_src27.arf exists, delete to re-create