[Mon Jun 24 16:07:26 2013] Detection parameters:
  Position = (389.5, 256.7) = 20 56 55.76 30 55 57.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 139.9 +/- 28.4
  Background counts = 316.6
  Rate = 0.02 +/- 0.004

[Mon Jun 24 16:07:27 2013] Off-axis axis estimate = 7.26'
[Mon Jun 24 16:08:51 2013] Using EEF radius (= 10.06 ")to estimate initial spatial extent for simple fitting
[Mon Jun 24 16:08:51 2013] Initial guess for spatial extent in simple fitting = 10.06"
[Mon Jun 24 16:08:51 2013] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.948
[Mon Jun 24 16:08:51 2013] Giving source the simple spatial ID 64 for pass 0, mean size = 10.06"
[Mon Jun 24 16:08:53 2013] fullrun_mos1_xmm0018141301_pi300-10000_cl_pass0_src64.ximg exists
[Mon Jun 24 16:08:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018141301_pi300-10000_cl_pass0_src64.csv
[Mon Jun 24 16:08:53 2013] fullrun_mos1_xmm0018141301_pi300-10000_cl_pass0_src64_1.ximg exists
[Mon Jun 24 16:08:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018141301_pi300-10000_cl_pass0_src64.csv
[Mon Jun 24 16:08:54 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0018141301_pi300-10000_cl_pass0_src64_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0018141301_pi300-10000_cl_pass0_src64.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 24 16:08:56 2013] fullrun_mos1_xmm0018141301_pi300-10000_cl_pass0_tfrozen_src64.ximg exists
[Mon Jun 24 16:08:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018141301_pi300-10000_cl_pass0_tfrozen_src64.csv
[Mon Jun 24 16:08:56 2013] fullrun_mos1_xmm0018141301_pi300-10000_cl_pass0_tfrozen_src64_1.ximg exists
[Mon Jun 24 16:08:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018141301_pi300-10000_cl_pass0_tfrozen_src64.csv
[Mon Jun 24 16:08:56 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0018141301_pi300-10000_cl_pass0_tfrozen_src64_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0018141301_pi300-10000_cl_pass0_tfrozen_src64.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 24 16:09:55 2013] Warning: source 64 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 136 at 12.592177 pixels away
[Mon Jun 24 16:09:56 2013] Vigneting correction estimate = 1.000000
[Mon Jun 24 16:09:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 24 16:09:56 2013] Assessing source extent using major
[Mon Jun 24 16:09:56 2013] Source does appear to be extended
[Mon Jun 24 16:09:56 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 24 16:11:01 2013] Using EEF radius (= 10.06 ")to estimate initial spatial extent for simple fitting
[Mon Jun 24 16:11:01 2013] Initial guess for spatial extent in simple fitting = 10.06"
[Mon Jun 24 16:11:01 2013] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.948
[Mon Jun 24 16:11:01 2013] Giving source the simple spatial ID 56 for pass 1, mean size = 10.06"
[Mon Jun 24 16:11:05 2013] fullrun_mos1_xmm0018141301_pi300-10000_cl_pass1_src56.ximg exists
[Mon Jun 24 16:11:05 2013] fullrun_mos1_xmm0018141301_pi300-10000_cl_pass1_src56_1.ximg exists
[Mon Jun 24 16:11:05 2013] Fit fullrun_mos1_xmm0018141301_pi300-10000_cl_pass1_src56 appears to have run properly
[Mon Jun 24 16:11:11 2013] fullrun_mos1_xmm0018141301_pi300-10000_cl_pass1_tfrozen_src56.ximg exists
[Mon Jun 24 16:11:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018141301_pi300-10000_cl_pass1_tfrozen_src56.csv
[Mon Jun 24 16:11:11 2013] fullrun_mos1_xmm0018141301_pi300-10000_cl_pass1_tfrozen_src56_1.ximg exists
[Mon Jun 24 16:11:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018141301_pi300-10000_cl_pass1_tfrozen_src56.csv
[Mon Jun 24 16:11:11 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0018141301_pi300-10000_cl_pass1_tfrozen_src56_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0018141301_pi300-10000_cl_pass1_tfrozen_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 24 16:12:10 2013] Source 136 is offset by -4.063416 and -0.388686 pixels which is larger than
2 X fitted extent = 1.575149 x 1.575149, not incorporating fit results
[Mon Jun 24 16:12:11 2013] Spatial fit model total counts = 3642.390000, observed total counts = 3411.000000
[Mon Jun 24 16:12:11 2013] Offset between fit and detection position for source 136 = 1.867592 pixels
[Mon Jun 24 16:12:11 2013] 3581.020000 total counts/ 3060.440000 bgd. counts: snr = 9.410128
Spatial fit parameters:
  Offset between fit and detection position for source 136 = 1.867592 pixels
  Position = (387.9, 257.7) = 20 56 56.30 30 56 1.6
  Extent = 15.1" x 14.4", rotation angle = 274
  Source counts = 520.6 +/- 59.8
  Background counts = 3060.4
  Rate = 0.05 +/- 0.005
[Mon Jun 24 16:12:11 2013] Vigneting correction estimate = 1.000000
[Mon Jun 24 16:12:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 24 16:12:11 2013] Assessing source extent using major
[Mon Jun 24 16:12:11 2013] Source does appear to be extended
[Mon Jun 24 16:12:11 2013] Computing asymmetry using major and minor axis, asym = 1.05
[Mon Jun 24 16:12:11 2013] Source is confused with source 66
[Mon Jun 24 16:13:39 2013] XMMSAS src. selection expression = ellipse(33702.609220, 22372.317211, 906.773605, 862.724954, 273.701255, X, Y)
[Mon Jun 24 16:13:39 2013] Not overwriting source region fullrun_mos1_xmm0018141301_pi300-10000_pass1_cl_src136_src.reg
[Mon Jun 24 16:13:39 2013] Extracting stamp from image fullrun_mos1_xmm0018141301_pi300-10000_cl_sm2.00.img.gz, (336, 206) - (440, 310)
[Mon Jun 24 16:13:39 2013] XMMSAS bgd. selection expression = annulus(33702.609220, 22372.317211, 1511.289341, 3022.578682, X, Y) && !ellipse(32697.771118, 20825.770447, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33887.770000, 21134.868000, 952.472027, 952.472027, 0.000000, X, Y) && !ellipse(32712.817200, 21404.220000, 1593.880046, 1071.472031, 30.249000, X, Y) && !ellipse(33631.120000, 20607.372000, 1658.632048, 1658.632048, 0.000000, X, Y) && !ellipse(33523.697632, 19971.516098, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32683.407700, 21614.612000, 1593.880046, 1593.880046, 0.000000, X, Y) && !ellipse(31620.888580, 25410.846741, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34032.791400, 21001.414000, 620.312818, 620.312818, 0.000000, X, Y) && !ellipse(32974.918000, 21424.698000, 3309.392095, 3309.392095, 0.000000, X, Y) && !ellipse(34463.771820, 21425.877426, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35178.470000, 21194.988800, 1768.904051, 1768.904051, 0.000000, X, Y) && !ellipse(33895.359253, 19449.571854, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34251.337616, 20402.127335, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34482.670319, 19952.113144, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36083.368000, 18802.836000, 1811.328052, 1811.328052, 0.000000, X, Y) && !ellipse(35957.241730, 20479.492233, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35273.766000, 20432.162000, 1811.328052, 1811.328052, 0.000000, X, Y) && !ellipse(35728.988861, 19469.286774, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35848.789093, 20950.465225, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38057.176000, 26850.414000, 3481.296100, 3481.296100, 0.000000, X, Y)
[Mon Jun 24 16:13:39 2013] Writing fullrun_mos1_xmm0018141301_pi300-10000_pass1_cl_src136.gif
[Mon Jun 24 16:13:43 2013] ../../xmm0018141301/products/events/fullrun_mos1_xmm0018141301_pi300-10000_pass1_cl_src136_src.evt and ../../xmm0018141301/products/events/fullrun_mos1_xmm0018141301_pi300-10000_pass1_cl_src136_bgd.evt exist, delete to re-create
[Mon Jun 24 16:13:43 2013] Mean detx,y = (-3874.49, 6847.38) 
[Mon Jun 24 16:13:43 2013] ../../xmm0018141301/products/images/fullrun_mos1_xmm0018141301_pi300-10000_pass1_cl_src136_src.img and ../../xmm0018141301/products/images/fullrun_mos1_xmm0018141301_pi300-10000_pass1_cl_src136_bgd.img exist, delete to re-create
[Mon Jun 24 16:13:43 2013] ../../xmm0018141301/products/spectra/fullrun_mos1_xmm0018141301_pi300-10000_pass1_cl_src136_src_b10.pi.gz and ../../xmm0018141301/products/spectra/fullrun_mos1_xmm0018141301_pi300-10000_pass1_cl_src136_bgd.pi exist, delete to re-create
[Mon Jun 24 16:13:43 2013] Setting source spectrum file to fullrun_mos1_xmm0018141301_pi300-10000_pass1_cl_src136_src_b10.pi.gz
[Mon Jun 24 16:13:43 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0018141301_pi300-10000_pass1_cl_src136_bgd.pi.gz
[Mon Jun 24 16:13:43 2013] ../../xmm0018141301/products/lightcurves/fullrun_mos1_xmm0018141301_pi300-10000_pass1_cl_src136_src.lc and ../../xmm0018141301/products/lightcurves/fullrun_mos1_xmm0018141301_pi300-10000_pass1_cl_src136_bgd.lc exist, delete to re-create
[Mon Jun 24 22:42:23 2013] fullrun_mos1_xmm0018141301_pi300-10000_pass1_cl_src136.rmf exists, delete to re-create
[Mon Jun 24 22:42:23 2013] fullrun_mos1_xmm0018141301_pi300-10000_pass1_cl_src136.arf exists, delete to re-create