[Mon Jun 24 16:07:24 2013] Detection parameters:
  Position = (360.3, 332.1) = 20 57 5.63 31 1 25.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 166.2 +/- 28.5
  Background counts = 305.9
  Rate = 0.02 +/- 0.003

[Mon Jun 24 16:07:27 2013] Off-axis axis estimate = 5.10'
[Mon Jun 24 16:08:51 2013] Using EEF radius (= 8.98 ")to estimate initial spatial extent for simple fitting
[Mon Jun 24 16:08:51 2013] Initial guess for spatial extent in simple fitting = 8.98"
[Mon Jun 24 16:08:51 2013] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.950
[Mon Jun 24 16:08:51 2013] Giving source the simple spatial ID 67 for pass 0, mean size = 8.98"
[Mon Jun 24 16:08:54 2013] fullrun_mos1_xmm0018141301_pi300-10000_cl_pass0_src67.ximg exists
[Mon Jun 24 16:08:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018141301_pi300-10000_cl_pass0_src67.csv
[Mon Jun 24 16:08:54 2013] fullrun_mos1_xmm0018141301_pi300-10000_cl_pass0_src67_1.ximg exists
[Mon Jun 24 16:08:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018141301_pi300-10000_cl_pass0_src67.csv
[Mon Jun 24 16:08:54 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0018141301_pi300-10000_cl_pass0_src67_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0018141301_pi300-10000_cl_pass0_src67.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 24 16:08:56 2013] fullrun_mos1_xmm0018141301_pi300-10000_cl_pass0_tfrozen_src67.ximg exists
[Mon Jun 24 16:08:56 2013] fullrun_mos1_xmm0018141301_pi300-10000_cl_pass0_tfrozen_src67_1.ximg exists
[Mon Jun 24 16:08:56 2013] Fit fullrun_mos1_xmm0018141301_pi300-10000_cl_pass0_tfrozen_src67 appears to have run properly
[Mon Jun 24 16:09:55 2013] Spatial fit model total counts = 4286.540000, observed total counts = 4381.000000
[Mon Jun 24 16:09:55 2013] Offset between fit and detection position for source 101 = 6.187339 pixels
[Mon Jun 24 16:09:55 2013] Warning, changing simple spatial fit ID from 67 to 38
[Mon Jun 24 16:09:55 2013] 4015.963000 total counts/ 3493.390000 bgd. counts: snr = 8.841449
Spatial fit parameters:
  Offset between fit and detection position for source 101 = 6.187339 pixels
  Position = (354.6, 334.6) = 20 57 7.54 31 1 36.1
  Extent = 14.7 (10.0-17.4)", rotation angle = 0
  Source counts = 522.6 +/- 63.4
  Background counts = 3493.4
  Rate = 0.05 +/- 0.006
[Mon Jun 24 16:09:55 2013] Spatial fit model total counts = 4012.340000, observed total counts = 4069.000000
[Mon Jun 24 16:09:55 2013] Offset between fit and detection position for source 101 = 3.925772 pixels
[Mon Jun 24 16:09:55 2013] Warning, changing simple spatial fit ID from 38 to 67
[Mon Jun 24 16:09:55 2013] 3889.496000 total counts/ 3391.560000 bgd. counts: snr = 8.550151
Spatial fit parameters:
  Offset between fit and detection position for source 101 = 3.925772 pixels
  Position = (358.3, 336.0) = 20 57 6.31 31 1 42.4
  Extent = 18.0 (17.9-35.9)", rotation angle = 0
  Source counts = 497.9 +/- 62.4
  Background counts = 3391.6
  Rate = 0.04 +/- 0.005
[Mon Jun 24 16:09:56 2013] Vigneting correction estimate = 1.000000
[Mon Jun 24 16:09:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 24 16:09:56 2013] Assessing source extent using major axis lower bound
[Mon Jun 24 16:09:56 2013] Source does appear to be extended
[Mon Jun 24 16:09:56 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 24 16:09:56 2013] Source is confused with source 63
[Mon Jun 24 16:11:01 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jun 24 16:11:01 2013] Initial guess for spatial extent in simple fitting = 17.96"
[Mon Jun 24 16:11:01 2013] source mask rpix=4.1, npix_max = 85, mask sum = 86, frac = 1.003
[Mon Jun 24 16:11:01 2013] Giving source the simple spatial ID 59 for pass 1, mean size = 17.96"
[Mon Jun 24 16:11:05 2013] fullrun_mos1_xmm0018141301_pi300-10000_cl_pass1_src59.ximg exists
[Mon Jun 24 16:11:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018141301_pi300-10000_cl_pass1_src59.csv
[Mon Jun 24 16:11:05 2013] fullrun_mos1_xmm0018141301_pi300-10000_cl_pass1_src59_1.ximg exists
[Mon Jun 24 16:11:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018141301_pi300-10000_cl_pass1_src59.csv
[Mon Jun 24 16:11:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0018141301_pi300-10000_cl_pass1_src59_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0018141301_pi300-10000_cl_pass1_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 24 16:11:12 2013] fullrun_mos1_xmm0018141301_pi300-10000_cl_pass1_tfrozen_src59.ximg exists
[Mon Jun 24 16:11:12 2013] fullrun_mos1_xmm0018141301_pi300-10000_cl_pass1_tfrozen_src59_1.ximg exists
[Mon Jun 24 16:11:12 2013] Fit fullrun_mos1_xmm0018141301_pi300-10000_cl_pass1_tfrozen_src59 appears to have run properly
[Mon Jun 24 16:12:11 2013] Spatial fit model total counts = 4432.270000, observed total counts = 4463.000000
[Mon Jun 24 16:12:11 2013] Offset between fit and detection position for source 101 = 3.003142 pixels
[Mon Jun 24 16:12:11 2013] Warning, changing simple spatial fit ID from 59 to 29
[Mon Jun 24 16:12:11 2013] 4265.125000 total counts/ 4042.860000 bgd. counts: snr = 3.495640
Spatial fit parameters:
  Offset between fit and detection position for source 101 = 3.003142 pixels
  Position = (355.9, 334.1) = 20 57 7.10 31 1 34.2
  Extent = 17.7 (17.7-35.4)", rotation angle = 0
  Source counts = 222.3 +/- 65.3
  Background counts = 4042.9
  Rate = 0.02 +/- 0.006
[Mon Jun 24 16:12:11 2013] Vigneting correction estimate = 1.000000
[Mon Jun 24 16:12:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 24 16:12:11 2013] Assessing source extent using major axis lower bound
[Mon Jun 24 16:12:11 2013] Source does appear to be extended
[Mon Jun 24 16:12:11 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 24 16:13:39 2013] XMMSAS src. selection expression = ellipse(30918.422000, 29021.196000, 1061.544031, 1061.544031, 0.000000, X, Y)
[Mon Jun 24 16:13:39 2013] Not overwriting source region fullrun_mos1_xmm0018141301_pi300-10000_pass1_cl_src101_src.reg
[Mon Jun 24 16:13:39 2013] Extracting stamp from image fullrun_mos1_xmm0018141301_pi300-10000_cl_sm2.00.img.gz, (295, 273) - (417, 395)
[Mon Jun 24 16:13:39 2013] XMMSAS bgd. selection expression = annulus(30918.422000, 29021.196000, 1769.240051, 3538.480102, X, Y) && !ellipse(27397.209600, 27470.634800, 1086.144031, 1086.144031, 0.000000, X, Y) && !ellipse(27129.116000, 30443.934000, 1368.144039, 1368.144039, 0.000000, X, Y) && !ellipse(27758.579800, 29450.508000, 1300.752037, 1300.752037, 0.000000, X, Y) && !ellipse(29530.712000, 27711.134880, 1280.512037, 1280.512037, 0.000000, X, Y) && !ellipse(28827.006600, 30418.434800, 1384.872040, 1384.872040, 0.000000, X, Y) && !ellipse(28743.622000, 28486.584000, 1350.064039, 454.982413, 3.644000, X, Y) && !ellipse(27894.005371, 31673.001495, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27208.692000, 30081.374000, 2601.504075, 2601.504075, 0.000000, X, Y) && !ellipse(28787.275400, 31910.246000, 1082.784031, 1082.784031, 0.000000, X, Y) && !ellipse(26959.052734, 31346.037292, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29950.092000, 30984.488000, 1467.960042, 1467.960042, 0.000000, X, Y) && !ellipse(31620.888580, 25410.846741, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28390.862244, 31708.764740, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26932.730160, 32029.158000, 1397.232040, 1397.232040, 0.000000, X, Y) && !ellipse(31227.001709, 28251.096191, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30593.172000, 28823.828000, 1314.216038, 360.328010, 0.000000, X, Y) && !ellipse(31118.852000, 30049.097600, 1451.600042, 1451.600042, 0.000000, X, Y) && !ellipse(29241.042450, 25799.803223, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30221.558600, 30269.630000, 1011.504029, 1011.504029, 0.000000, X, Y) && !ellipse(29400.933400, 26144.702000, 1054.728030, 1054.728030, 0.000000, X, Y) && !ellipse(28865.193848, 26236.730774, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32122.073400, 27422.400200, 1449.568042, 1449.568042, 0.000000, X, Y) && !ellipse(26780.480774, 26222.988342, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27976.621918, 25546.293060, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 24 16:13:39 2013] Writing fullrun_mos1_xmm0018141301_pi300-10000_pass1_cl_src101.gif
[Mon Jun 24 16:13:43 2013] ../../xmm0018141301/products/events/fullrun_mos1_xmm0018141301_pi300-10000_pass1_cl_src101_src.evt and ../../xmm0018141301/products/events/fullrun_mos1_xmm0018141301_pi300-10000_pass1_cl_src101_bgd.evt exist, delete to re-create
[Mon Jun 24 16:13:43 2013] Mean detx,y = (2304.50, 3141.86) 
[Mon Jun 24 16:13:43 2013] ../../xmm0018141301/products/images/fullrun_mos1_xmm0018141301_pi300-10000_pass1_cl_src101_src.img and ../../xmm0018141301/products/images/fullrun_mos1_xmm0018141301_pi300-10000_pass1_cl_src101_bgd.img exist, delete to re-create
[Mon Jun 24 16:13:43 2013] ../../xmm0018141301/products/spectra/fullrun_mos1_xmm0018141301_pi300-10000_pass1_cl_src101_src_b10.pi.gz and ../../xmm0018141301/products/spectra/fullrun_mos1_xmm0018141301_pi300-10000_pass1_cl_src101_bgd.pi exist, delete to re-create
[Mon Jun 24 16:13:43 2013] Setting source spectrum file to fullrun_mos1_xmm0018141301_pi300-10000_pass1_cl_src101_src_b10.pi.gz
[Mon Jun 24 16:13:43 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0018141301_pi300-10000_pass1_cl_src101_bgd.pi.gz
[Mon Jun 24 16:13:43 2013] ../../xmm0018141301/products/lightcurves/fullrun_mos1_xmm0018141301_pi300-10000_pass1_cl_src101_src.lc and ../../xmm0018141301/products/lightcurves/fullrun_mos1_xmm0018141301_pi300-10000_pass1_cl_src101_bgd.lc exist, delete to re-create
[Mon Jun 24 22:42:23 2013] fullrun_mos1_xmm0018141301_pi300-10000_pass1_cl_src101.rmf exists, delete to re-create
[Mon Jun 24 22:42:23 2013] fullrun_mos1_xmm0018141301_pi300-10000_pass1_cl_src101.arf exists, delete to re-create